402

Cat EGP Switchgear

EGP (Emergency Generator Paralleling) switchgear is used for paralleling multiple generators that are not directly connected to a utility source.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Configuration

Configurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications

Modes of Operation

Multi-unit Island and multi-unit standby mode with optional redundant controls and components.

Application

LV and MV (208V - 38 kV)

ANSI Protective Devices

15/25, 27/59, 81 O/U, 32, 40, 50, 51

Certifications

IBC, CBC, UBC & OSHPD Certified

Control Panel Enclosure

NEMA 1 or NEMA 3R Freestanding Construction

Operating Temperature

0°C to 50°C

Storage Temperature

-20°C to +60°C

Low Voltage Standards

NEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70

Medium Voltage Standards

NEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110

Data Table Interface

* Accomodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP

Supplemental Hardware Synchronization check relay (ANSI 25 Device)

* Provides additional discrete synchronization protection

Remote Power Monitoring System

* To monitor breaker status, alarms, metering and other operating parameters

EGP Switchgear

Choice of 19” Surface Acoustic Wave Color or 15” Resistive Color Touchscreen

Emergency Stop Button for each generator

Instant Auto Switch

Generator Demand Priority Control

Audible Alarm & Horn Silence Button

Circuit Breaker Control Switch with Indicators

ALL

EGP Switchgear

Choice of 19” Surface Acoustic Wave Color or 15” Resistive Color Touchscreen

Emergency Stop Button for each generator

Instant Auto Switch

Generator Demand Priority Control

Audible Alarm & Horn Silence Button

Circuit Breaker Control Switch with Indicators

Optional Equipment

Data Table Interface

* Accomodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP

Supplemental Hardware Synchronization check relay (ANSI 25 Device)

* Provides additional discrete synchronization protection

Remote Power Monitoring System

* To monitor breaker status, alarms, metering and other operating parameters

    Send an Enquiry