402

Cat® C3.6 Diesel Engine for Tractors

The Cat® C3.6 agricultural tractor engine offers the perfect balance of compact size, reliability, and performance. This engine is offered in ratings ranging up to 100 kW (134 hp) @ 2200 rpm.

The C3.6 is designed to meet the specific requirements of agricultural tractors including structural sump with integral twin balancer shafts.

The C3.6 meets EU Stage V, U.S. EPA Tier 4 Final, and Japan 2014 emission standards.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Maximum Power

134hp

Maximum Torque

391lb-ft @ 1500 rpm

Rated Speed

2000-2400 rpm

Minimum Power

74hp

Emissions

U.S. EPA & CARB Tier 4 Final, EU Stage V

Engine Configuration

In-Line 4

Bore

3.9in

Stroke

4.7in

Displacement

220in³

Compression Ratio

17.0:1

Aspiration

Turbocharged-Aftercooled (TA)

Combustion System

Direct Injection

Rotation from Flywheel End

Counterclockwise

Aftertreatment

DOC+DPF or DOC+DPF+SCR

Length

26.8in

Width

22.2in

Height

33.7in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments

840lb

Control System

Starter motor (12V)

Alternator (12V)

Electronic Control Unit (chassis mounted)

Engine control sensors and robust wiring harness

Data interface via CANbus SAE J1939

Flywheels and Flywheel Housing

Agricultural back plate for transmission mounting

Choice of flywheel to match industry common hydraulic pumps and transmissions

Side PTO with SAE A or SAE B interface

Fuel System

Fuel filter – chassis mounted

With water sensor

Lube System

Lubricating oil filters

High incline oil pan – 25° continuous in all directions

General

Cold start capability to -25° C (-13° F) with standard equipment

Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment

Diesel Oxidation Catalyst (DOC) and Diesel Particulate Filter (DPF)

Selective Catalytic Reduction (SCR) (not required <56 kW)

ALL

Control System

Starter motor (12V)

Alternator (12V)

Electronic Control Unit (chassis mounted)

Engine control sensors and robust wiring harness

Data interface via CANbus SAE J1939

Flywheels and Flywheel Housing

Agricultural back plate for transmission mounting

Choice of flywheel to match industry common hydraulic pumps and transmissions

Side PTO with SAE A or SAE B interface

Fuel System

Fuel filter – chassis mounted

With water sensor

Lube System

Lubricating oil filters

High incline oil pan – 25° continuous in all directions

General

Cold start capability to -25° C (-13° F) with standard equipment

Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Final, EU Stage V Aftertreatment/ Clean Emissions Control Equipment

Diesel Oxidation Catalyst (DOC) and Diesel Particulate Filter (DPF)

Selective Catalytic Reduction (SCR) (not required <56 kW)

    Send an Enquiry