-
Specifications
-
Standard/Optional Equipment
Maximum Power
24.6hp
Maximum Torque
63.4lb-ft @ 1800 rpm
Rated Speed
2200/2800 rpm
Minimum Power
24.6hp
Emissions
U.S. EPA Tier 4 Final
Engine Configuration
In-Line 3
Bore
3.3in
Stroke
3.5in
Displacement
91in³
Compression Ratio
22.5:1
Aspiration
Naturally Aspirated (NA)
Combustion System
Indirect Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
22.5in
Width
17.9in
Height
25.3in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
327lb
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Tier 4 Final: Alternator 12V 85 amp
Cooling System
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Flywheel & Flywheel Housing
Naturally Aspirated: SAE No. 7 1/2 flywheel
Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
Fuel System
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Lube System
Alternative oil fillers
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Power Take Off (PTO)
Provision for Power Take Off (PTO)
General
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous
ALL
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Tier 4 Final: Alternator 12V 85 amp
Cooling System
Belt-driven coolant pump
Coolant temperature switch
Choice of cooling fans
Flywheel & Flywheel Housing
Naturally Aspirated: SAE No. 7 1/2 flywheel
Naturally Aspirated: Choice of SAE No. 4 or standard backplate flywheel housing
Fuel System
Fuel injection pump
Spin-on fuel filter
Electronic Shut-off Solenoid (ESOS)
Lube System
Alternative oil fillers
Spin-on lube oil filter
Lube oil pressure switch
Lube oil sump
Power Take Off (PTO)
Provision for Power Take Off (PTO)
General
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Gradeability 35° continuous