-
Specifications
-
Standard/Optional Equipment
Maximum Power
142hp
Maximum Torque
411.2lb-ft @ 1400 rpm
Rated Speed
2200 rpm
Minimum Power
91.2hp
Emissions
China Nonroad Stage III, Brazil MAR-1, UN ECE R96 Stage IIIA
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1in
Stroke
5in
Displacement
269in³
Compression Ratio
16.9:1
Aspiration
Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
24.8in
Width
24.6in
Height
37.7in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
794lb
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator
Starter motor
Glow plug starting aid
Flywheels and Flywheel Housing
SAE No. 3 flywheel housing
Flywheel and starter rings
Fuel System
Fuel filter positions
Lube System
Lubricating oil filters and breathers
Oil filter positions
Lube oil sump
Power Take Off
SAE B Power Take Off (PTO)
General
Paint: Caterpillar yellow, with optional colors available at request
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring
ALL
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator
Starter motor
Glow plug starting aid
Flywheels and Flywheel Housing
SAE No. 3 flywheel housing
Flywheel and starter rings
Fuel System
Fuel filter positions
Lube System
Lubricating oil filters and breathers
Oil filter positions
Lube oil sump
Power Take Off
SAE B Power Take Off (PTO)
General
Paint: Caterpillar yellow, with optional colors available at request
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring