-
Specifications
-
Standard/Optional Equipment
Maximum Power
630hp
Rated Speed
1800-2100
Minimum Power
575hp
Emissions
China Stage II, U.S. EPA Tier 3 Equivalent, EU Stage IIIA Equivalent or Non-Certified
Engine Configuration
Inline 6, 4-Stroke-Cycle Diesel
Bore
5.7in
Stroke
7.2in
Displacement
1104.5in³
Compression Ratio
16.3:1
Aspiration
Turbocharged Aftercooled (TA)
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
54.6in
Width
36.3in
Height
48.9in
Weight
4844lb
Air Inlet System
Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
Air-to-Air Aftercooled
Charging System
Charging alternator 24 volt, 50 amp
Control System
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron)
ACERT™ Technology
Fuel transfer pump
Fuel priming pump
Lube System
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump
General
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request
ALL
Air Inlet System
Turbocharged Aftercooled (429-470 bkW, 575-630 bhp)
Twin Turbocharged Aftercooled (522-597 bkW, 700-800 bhp)
Air-to-Air Aftercooled
Charging System
Charging alternator 24 volt, 50 amp
Control System
Electronic governing, PTO speed control
Programmable ratings
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and total engine limit
Electronic diagnostics and fault logging
Engine monitoring system SAE J1939 broadcast and control
ADEM™ A4 Electronic Control Unit (ECU)
Cooling System
Thermostats and housing, vertical outlet
Jacket water pump, centrifugal
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 flywheel housing
Fuel System
MEUI injection
Fuel filter, secondary (2 micron)
ACERT™ Technology
Fuel transfer pump
Fuel priming pump
Lube System
Crankcase breather
Oil cooler
Oil filler
Lube oil filter
Front sump oil pan
Oil dipstick
Gear driven oil pump
General
Vibration damper
Lifting eyes
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request