-
Specifications
-
Standard/Optional Equipment
- Catalog
Power Range
400 - 500 bhp (298 - 373 bkW)
Speed Range
2900 rpm
Rotation from Flywheel End
Counterclockwise
Bore
4.13in
Stroke
5.31in
Aspiration
Turbocharged - Aftercooled
Displacement
428in³
Configuration
In-line 6, 4-Stroke-Cycle Diesel
Emissions
IMO II, U.S. EPA Tier 3, RCD II, China II
Width - Engine
31.4in
Height
34.5in
Engine Dry Weight - Approximate
1676lb
Length - Engine
43.1in
OPTIONAL ATTACHEMENTS
Transmission gear oil cooler (engine mounted)
General
Alternators - 24V 140 amp - 12V 175 amp
Instrument Panels
Glow plugs
Primary fuel filter/water separator (remote mount)
Selection of factory-fitted marine transmissions and oil hoses
Triple groove PTO pulley (crankshaft mounted)
Flexible fuel hoses
Cooling System
Jacket water heater
Cabin heater (calorifier) connections
Exhaust System
6" water cooled exhaust elbow
Mounting System
Isolation mounts
Lube System
Right-hand and high level left hand oil dipsticks
Exhaust System
Water cooled turbocharger and exhaust manifold
Fuel System
Common rail fuel system
Fuel cooler
Electric fuel priming pump
Cooling System
Corrosion resistant sea water aftercooler
Gear driven sea water pump (rubber impeller)
Fin and tube type jacket water heat exchanger
Starting System
Starter motors - 12V or 24V
General
Closed crankcase ventilation system
Integral engine oil cooler
Vibration damper and guard
Self-tensioning multi-vee alternator drive belt
Mounting System
Front and rear engine mounting brackets
ALL
Exhaust System
Water cooled turbocharger and exhaust manifold
Fuel System
Common rail fuel system
Fuel cooler
Electric fuel priming pump
Cooling System
Corrosion resistant sea water aftercooler
Gear driven sea water pump (rubber impeller)
Fin and tube type jacket water heat exchanger
Starting System
Starter motors - 12V or 24V
General
Closed crankcase ventilation system
Integral engine oil cooler
Vibration damper and guard
Self-tensioning multi-vee alternator drive belt
Mounting System
Front and rear engine mounting brackets
Optional Equipment
OPTIONAL ATTACHEMENTS
Transmission gear oil cooler (engine mounted)
General
Alternators - 24V 140 amp - 12V 175 amp
Instrument Panels
Glow plugs
Primary fuel filter/water separator (remote mount)
Selection of factory-fitted marine transmissions and oil hoses
Triple groove PTO pulley (crankshaft mounted)
Flexible fuel hoses
Cooling System
Jacket water heater
Cabin heater (calorifier) connections
Exhaust System
6" water cooled exhaust elbow
Mounting System
Isolation mounts
Lube System
Right-hand and high level left hand oil dipsticks