-
Specifications
-
Standard/Optional Equipment
- Catalog
Power Range
58.0R - 118 ekW
Frequency
50 / 60
Emissions
U.S. EPA Tier 3, EU Stage V
Aspiration
Turbocharged - Aftercooled and turbo only aspiration (Turbocharged aspiration only for 65ekW (71bkW))
Rated Engine Speed
1500/1800 rpm
Bore
4.13in
Stroke
5in
Displacement
269in³
Governor
Electronic (A5 ECM)
Refill Capacity
Lube Oil System w/Oil filter change: 11 L 2.8 gal)
Oil Change Interval
500 hours
Cooling
Heat exchanger, combined circuit keel cooling, or separate circuit keel cooling
Flywheel Housing
SAE No. 03 with SAE 11.5 flywheel (126 teeth)
Maximum Length
80.2in
Maximum Height
78.7in
Maximum Width
38.3in
Maximum Engine Dry Weight
3389lb
Configuration
In-line 4, 4-stroke-cycle diesel
General
MGGP 200 Gauge Panel and interface harness
Engine shutdown sensors and shutdown controller
Jacket water connections (keel cooled)
Glow plugs
Jacket water heater
Oil & Coolant sample points
EMCP engine control panel
Double wall high pressure fuel lines
Exhaust elbow and bellows
Rear mounting feet
Cooling System
Gear-driven jacket-water and auxiliary water pumps
Engine mounted air cleaner and expansion tank
Integral plate-type oil cooler
Exhaust System
Watercooled exhaust manifold and turbocharger
Fuel System
Common Rail fuel system
Electric fuel priming pump
Lube System
Open crankcase ventilation system
Mounting System
Engine mounted fuel and oil filter
Engine mounted customer interface and control relays
Starting System
12 V or 24 V starter motor
12 V or 24 V starter motor
General
Internal engine balancing shaft
Self-tensioning multi-vee belt drive
ALL
Cooling System
Gear-driven jacket-water and auxiliary water pumps
Engine mounted air cleaner and expansion tank
Integral plate-type oil cooler
Exhaust System
Watercooled exhaust manifold and turbocharger
Fuel System
Common Rail fuel system
Electric fuel priming pump
Lube System
Open crankcase ventilation system
Mounting System
Engine mounted fuel and oil filter
Engine mounted customer interface and control relays
Starting System
12 V or 24 V starter motor
12 V or 24 V starter motor
General
Internal engine balancing shaft
Self-tensioning multi-vee belt drive
Optional Equipment
General
MGGP 200 Gauge Panel and interface harness
Engine shutdown sensors and shutdown controller
Jacket water connections (keel cooled)
Glow plugs
Jacket water heater
Oil & Coolant sample points
EMCP engine control panel
Double wall high pressure fuel lines
Exhaust elbow and bellows
Rear mounting feet