402

Cat C280-8 Propulsion Engine

The Cat® C280-8 marine propulsion engine delivers 2,300 to 3,000 bkW for high-utilization workboats operating at 900 or 1,000 rpm. Heavy-duty construction, flexible vessel integration and service intervals up to 925 hours help crews maintain productive operation in demanding marine environments.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Power Range

3084-4023 bhp (2300-3000 bkW)

Application

Workboat

Speed Range

900 - 1000 rpm

Emissions

IMO II, IMO III/EPA Tier 4

Aspiration

TA

Bore

11in

Stroke

11.8in

Displacement

9031in³

Rotation from Flywheel End

Counterclockwise or clockwise

Configuration

In-line 8, 4-Stroke-Cycle Diesel

Height

104in

Dry Weight

41800lb

Width

71in

Length

195in

Exhaust System

Exhaust manifold shielding - soft

Cooling System

Jacket Water Heaters

Fuel System

SOLAS shielding

Lube System

Front and rear oil pan drains

Wet sump

SOLAS shielding

Protection System

Oil mist detector

Cylinder pressure relief valves

Cylinder pressure relief valves

General

LH and RH service availability

Air Inlet System

Aftercooler, fresh water, corrosion resistant coated (air side)

Crankcase breathers, top mounted

Single turbocharger, rear-mounted, engine oil lubricated

Air inlet adapter - Straight / 90 degree / 35 degree

Control System

Dual Caterpillar ADEM A4 Electronic Engine Control Modules

Rigid Wiring Harness

Aftercooler/oil cooler and jacket water pumps (gear driven)

Cooling System

Engine coolant water drains

Single Circuit / Separate Circuit Aftercooler

Exhaurt System

Dry, gas tight, exhaust manifold

Exhaust System

Turbo speed sensors - overspeed protection

Fuel System

Fuel transfer pump, gear driven

Duplex Fuel filters

Electronically Controlled Unit Injectors

Instrumentation

CAT Alarm & Protection System

Lube System

Oil pump, gear driven

Lube Systems

2 element oil cooler, engine mounted

Duplex centrifugal oil filter - engine mounted

Prelube pump - air / electric

Protection System

Crankcase explosion relief valves

ALL

General

LH and RH service availability

Air Inlet System

Aftercooler, fresh water, corrosion resistant coated (air side)

Crankcase breathers, top mounted

Single turbocharger, rear-mounted, engine oil lubricated

Air inlet adapter - Straight / 90 degree / 35 degree

Control System

Dual Caterpillar ADEM A4 Electronic Engine Control Modules

Rigid Wiring Harness

Aftercooler/oil cooler and jacket water pumps (gear driven)

Cooling System

Engine coolant water drains

Single Circuit / Separate Circuit Aftercooler

Exhaurt System

Dry, gas tight, exhaust manifold

Exhaust System

Turbo speed sensors - overspeed protection

Fuel System

Fuel transfer pump, gear driven

Duplex Fuel filters

Electronically Controlled Unit Injectors

Instrumentation

CAT Alarm & Protection System

Lube System

Oil pump, gear driven

Lube Systems

2 element oil cooler, engine mounted

Duplex centrifugal oil filter - engine mounted

Prelube pump - air / electric

Protection System

Crankcase explosion relief valves

Optional Equipment

Exhaust System

Exhaust manifold shielding - soft

Cooling System

Jacket Water Heaters

Fuel System

SOLAS shielding

Lube System

Front and rear oil pan drains

Wet sump

SOLAS shielding

Protection System

Oil mist detector

Cylinder pressure relief valves

Cylinder pressure relief valves

    Send an Enquiry