402

G3516J Gas Engine

The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3516J gas engines are rated at 1029 bkW (1380 bhp) @ 1400 rpm and 1119 bkW (1500 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided aftertreatment.

  • Specifications

  • Standard/Optional Equipment

Rated Speed

1400rpm

Emissions

Lean Burn: EPA NSPS Site Compliant Capable with Customer Supplied Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

Minimum Rating

1380BHP

Maximum Rating

1500BHP

Displacement

4211in³

Aspiration

Turbocharged - 2 Stage Aftercooled

Flywheel and Flywheel Housing

Counterclockwise

Oil Change Interval

2000 hours

Stroke

7.5in

Bore

6.7in

Combustion

Lean Burn

Governor

Electronic (ADEM A3)

Lube Oil System

423 L (112 gal)

Charging Ssytem

Alternator

Charging System

Upper RH Accessory Drive

General

Language Decals

Lube System

Air Prelube Pump

Lubricating Oil

Oil Drain

Oil filter

Oil Pan

Lubrication System

Air prelube pump

Lubricating oil

Oil pan drain

Protection System

Explosion relief valves

Starting System

90 psi starter

150 psi starter

Air Inlet System

Round air inlet adapter

Single element canister type with service indicator

Cooling System

Two-stage charge air cooling system

Engine cooling and charge air cooling thermostats

Exhaust System

Watercooled exhaust manifolds

Dry Turbocharger housings

Water-cooled exhaust elbow

Fuel System

7-40 psig gas supply

Electronic fuel metering valve

Gas pressure regulator

Gas shutoff valve

Fuel System

Instrumentation

8 inch HMI Engine Control Panel

Interconnect harness

Lubrication System

Crankcase breather — top mounted

Oil sampling valve

Deep sump oil pan

Oil sampling valve

Turbo oil accumulator

Protection System

Gas shutoff valve

Power Take Offs

Front housing, two sided

ALL

Air Inlet System

Round air inlet adapter

Single element canister type with service indicator

Cooling System

Two-stage charge air cooling system

Engine cooling and charge air cooling thermostats

Exhaust System

Watercooled exhaust manifolds

Dry Turbocharger housings

Water-cooled exhaust elbow

Fuel System

7-40 psig gas supply

Electronic fuel metering valve

Gas pressure regulator

Gas shutoff valve

Fuel System

Instrumentation

8 inch HMI Engine Control Panel

Interconnect harness

Lubrication System

Crankcase breather — top mounted

Oil sampling valve

Deep sump oil pan

Oil sampling valve

Turbo oil accumulator

Protection System

Gas shutoff valve

Power Take Offs

Front housing, two sided

Optional Equipment

Charging Ssytem

Alternator

Charging System

Upper RH Accessory Drive

General

Language Decals

Lube System

Air Prelube Pump

Lubricating Oil

Oil Drain

Oil filter

Oil Pan

Lubrication System

Air prelube pump

Lubricating oil

Oil pan drain

Protection System

Explosion relief valves

Starting System

90 psi starter

150 psi starter

    Send an Enquiry