-
Specifications
-
Standard/Optional Equipment
- Catalog
Gross Input Power
2500BHP
Gross Peak Input Torque
8914ft-lb
Rated Input Speed
1900r/min
Gears
6F/0R
1F Gear Ratio
4.54
2F Gear Ratio
3.33
3F Gear Ratio
2.99
4F Gear Ratio
2.46
5F Gear Ratio
2.20
6F Gear Ratio
1.62
Cat Engines for Optimized Power Train
Cat 3512C (HD)
Cat 3512E (HD)
Transmission Rotation
Input rotation — counterclockwise
Output rotation — counterclockwise(as viewed from rear)
Torque Converter
Factory installed torque converter
Series — TC58733-ESLF
Stall torque ratio — 2.30
Clutches
Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
Installation Connections
2 cooler
1 electrical
Oil System
Cat Transmission/Drive Train Oil-4 (TDTO)
Oil temperatures continuous - 80°C (195°F)
Hydraulic Fill Capacity — Approx. 108L (28.5 gal), 104 L (27.5 gal) initial fill; 87 L (23 gal) refill; subject to cooler size, lines, and installation
Filter Type — 6 micron synthetic, cartridge remote mount
Mountings
Input connection (flywheel) — SAE #0
Output connections (yoke) - GWB 390.65, GWB 390.60
Structural application subject to Caterpillar approval
Control System
Electronic Control Unit (ECU)
Electronic data link, SAE J1939
Electrical system 24V
Power Take-Off Drives
Mounting Type: J704 SAE Bolt, Location: 12 o’clock, Rated Power: 150HP @1900RPM
Mounting Type: J744 SAE C, Location: 10 o’clock, Rated Power: 150HP @1900RPM
ALL
Cat Engines for Optimized Power Train
Cat 3512C (HD)
Cat 3512E (HD)
Transmission Rotation
Input rotation — counterclockwise
Output rotation — counterclockwise(as viewed from rear)
Torque Converter
Factory installed torque converter
Series — TC58733-ESLF
Stall torque ratio — 2.30
Clutches
Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
Installation Connections
2 cooler
1 electrical
Oil System
Cat Transmission/Drive Train Oil-4 (TDTO)
Oil temperatures continuous - 80°C (195°F)
Hydraulic Fill Capacity — Approx. 108L (28.5 gal), 104 L (27.5 gal) initial fill; 87 L (23 gal) refill; subject to cooler size, lines, and installation
Filter Type — 6 micron synthetic, cartridge remote mount
Mountings
Input connection (flywheel) — SAE #0
Output connections (yoke) - GWB 390.65, GWB 390.60
Structural application subject to Caterpillar approval
Control System
Electronic Control Unit (ECU)
Electronic data link, SAE J1939
Electrical system 24V
Power Take-Off Drives
Mounting Type: J704 SAE Bolt, Location: 12 o’clock, Rated Power: 150HP @1900RPM
Mounting Type: J744 SAE C, Location: 10 o’clock, Rated Power: 150HP @1900RPM