-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
1150BHP
Emissions
U.S. EPA Non-road Tier 2
Displacement
1658in³
Minimum Rating
800BHP
Bore
5.42in
Stroke
6in
Aspiration
Turbocharged-Aftercooled
Governor and Protection
ADEM A3
Engine Weight - Net Dry
6382lb
Oil Change Interval
250
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1
Flywheel Teeth
136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only
14.5gal (US)
Length
75.5in
Width
57.6in
Height
52in
Air Inlet System
Air lines
Air cleaners
Precleaners
Charging System
Battery chargers
Charging alternators
Alternator mountings
Circuit Breakers
Circuit breaker mounting
Cooling System
Blower fans
Suction fans
Radiators
Exhaust System
Muffler
Fuel Systems
Electric fuel priming pump
Instrumentation
Gauges and instrument panels
Lube System
Lubricating oil
Oil pan
Oil filter
Mounting System
Engine supports
Power Take-Offs
Hydraulic pump drives
Pulley
Auxiliary drive
Starting System
Electric starting motor
Battery sets - 24V
Battery cable
Battery rack
Starting aids
Packaging
Overseas preservation
Storage preservation
Export packaging
Air Inlet System
Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
Control System
Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring and protection system (speed, temperature, pressure)
J1939 Broadcast (diagnostic, engine status, and control)
Cooling System
Thermostats and housing — outlet LH vertical orientation
Jacket water pump — gear-driven, centrifugal RH
Exhaust System
Exhaust manifold — dry, heat shields
Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
Water-cooled center sections
Flywheels and Flywheel Housings
SAE No. 0 or SAE No. 1
SAE standard rotation
Fuel System
MEUI system
Fuel filter, RH ( 2 micron high performance)
Fuel transfer pump
Fuel priming pump (optional electric priming pump)
Lube System
Crankcase breather — rear mounted
Oil cooler — RH
Side turbo — oil filler in RH front gear case
Rear turbo — oil filler in RH valve cover
Oil level gauge — RH
Oil filter — RH
Oil pan rear sump
Mounting System
Front support — narrow
Power Take-Offs
Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
General
Vibration damper
Paint — Cat yellow
Lifting eyes
Automatic variable timing, electronic
Electronic installation kit 70-pin connector (connectors, pins, sockets)
ALL
Air Inlet System
Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
Control System
Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring and protection system (speed, temperature, pressure)
J1939 Broadcast (diagnostic, engine status, and control)
Cooling System
Thermostats and housing — outlet LH vertical orientation
Jacket water pump — gear-driven, centrifugal RH
Exhaust System
Exhaust manifold — dry, heat shields
Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
Water-cooled center sections
Flywheels and Flywheel Housings
SAE No. 0 or SAE No. 1
SAE standard rotation
Fuel System
MEUI system
Fuel filter, RH ( 2 micron high performance)
Fuel transfer pump
Fuel priming pump (optional electric priming pump)
Lube System
Crankcase breather — rear mounted
Oil cooler — RH
Side turbo — oil filler in RH front gear case
Rear turbo — oil filler in RH valve cover
Oil level gauge — RH
Oil filter — RH
Oil pan rear sump
Mounting System
Front support — narrow
Power Take-Offs
Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
General
Vibration damper
Paint — Cat yellow
Lifting eyes
Automatic variable timing, electronic
Electronic installation kit 70-pin connector (connectors, pins, sockets)
Optional Equipment
Air Inlet System
Air lines
Air cleaners
Precleaners
Charging System
Battery chargers
Charging alternators
Alternator mountings
Circuit Breakers
Circuit breaker mounting
Cooling System
Blower fans
Suction fans
Radiators
Exhaust System
Muffler
Fuel Systems
Electric fuel priming pump
Instrumentation
Gauges and instrument panels
Lube System
Lubricating oil
Oil pan
Oil filter
Mounting System
Engine supports
Power Take-Offs
Hydraulic pump drives
Pulley
Auxiliary drive
Starting System
Electric starting motor
Battery sets - 24V
Battery cable
Battery rack
Starting aids
Packaging
Overseas preservation
Storage preservation
Export packaging