402

C15 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Maximum Rating

500 ekW

Minimum Rating

320 ekW

Emissions/Fuel Strategy

Low Fuel, Tier 2, Tier 3, EU Stage IIIA

Voltage

208 to 600 Volts

Frequency

60 Hz

Speed

1800 RPM

Duty Cycle

Standby, Prime

Engine Model

C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore

5.4in

Stroke

6.75in

Displacement

927.56in³

Compression Ratio

16.1:1

Aspiration

Air to Air Aftercooled

Fuel System

MEUI

Governor Type

Adem™A4

Length - Maximum

168.2in

Width - Maximum

81in

Height - Maximum

126.3in

Air Inlet System

Single element air cleaner

Dual element air cleaner

Exhaust

Industrial, residential, critical mufflers

Certifications

EU Certificate of Conformance (CE)

Global certification for CIS

Circuit breakers

Shunt trip for IEC circuit breaker

Padlockable circuit breaker device

4 Pole (IEC-100% rated) Circuit breakers - Motorised

Auxiliary contacts, circuit breaker

3 Pole (IEC-100% rated) Circuit breakers - Motorised

3 Pole (IEC-100% rated) Circuit breakers - Package mounted

4 Pole (IEC-100% rated) Circuit breakers - Package mounted

Power terminal strip

Generator

Oversize and premium generators

Anti-condensation heater

Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

GCCP 1.4

Volt free contacts

Local annunciator

Remote annunciator module

Local alarm horn

Oil temperature displays

Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor

Starting/Charging

Jacket water heater

Charging alternator

Heavy duty starting system

Battery chargers

Oversize batteries

Cooling System

Stone guards

Radiator duct flange

Low coolant temperature alarm

Enclosures

Sound attenuated enclosures

High ambient sound attenuated enclosures

General

Sound attenuated, weather protective or high ambient weather protective enclosure

CSA Certification

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

EEC Declaration of Conformity

Integral & sub-base UL listed dual wall fuel tanks

Automatic transfer switches (ATS)

Single or dual wall sub-base fuel tanks

The following options are based on regional and product configuration:

EU Certificate of Conformance (CE)

Single or dual wall integral fuel tanks

Narrow, wide or skid base

UL 2200 package

Exhaust System

Engine mounted muffler

End in/end out mufflers - 10, 25 and 35 dBA attenuation

6 and 8 inch elbow kit

Manifold and turbocharger guards

Flexible exhaust fittings

6 and 8 inch flange GP

Fuel System

Manual fuel transfer pump

Dual wall fuel tank base

Fuel transfer system controls

Generator and Attachments

Space heaters

Permanent magnet excitation (PMG) generator

Ingress protection

LC frame generator

Oversize A Frame generator

LC frame CIP generator

CIP A Frame generator

Oversize LC frame generator

Lube System

Manual sump pump

Mounting System

Narrow skid base - replaces standard fuel tank base

Special Test / Reports

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Starting / Charging System

5 Amp single Battery charger

Battery disconnect switch

Jacket water heater

Air Inlet

Air cleaner

Air System

Turbocharger

Air cleaner - Non canister disposable paper filter

Aftercooler core

Control Panel

GCCP 1.3

GCCP 1.3 Genset Controller

Cooling

Package mounted radiator

Cooling System

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Radiator and cooling fan with guard

Coolant drain line with valve

Exhaust

Base, formed steel with single wall integral 8-hour fuel tank

Standard open set fuel tank/base supplied

Exhaust flange outlet

Fuel

Secondary fuel filters

Primary fuel filter with integral water separator

Fuel priming pump

Fuel System

Primary fuel filter w/integral water separator and secondary filter

Fuel priming pump

Engine fuel transfer pump

Flexible fuel lines

Fuel cooler

Generator

Matched to the performance and output characteristics of Cat engines

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

IP23 Protection

Power Termination

Busbar

Generator and Attachments

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

Integrated voltage regulator (IVR)

Segregated low voltage (AC/DC) wiring panel

Optional LC Frame generator - IP23 Protection

Power center, IP22

A Frame generator - IP21 Protection

Mounting

Rubber vibration isolators

Governing System

Cat electronic governor (ADEM A4).

Lube System

Oil cooler

Oil drain valves

Mounting System

Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Starting/Charging

24 Volt battery with rack and cables

24 volt starting motor

Batteries

General

Engine and alternator pre paint, Caterpillar yellow

Paint - Caterpillar yellow except rails and radiators gloss black

ALL

Air Inlet

Air cleaner

Air System

Turbocharger

Air cleaner - Non canister disposable paper filter

Aftercooler core

Control Panel

GCCP 1.3

GCCP 1.3 Genset Controller

Cooling

Package mounted radiator

Cooling System

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Radiator and cooling fan with guard

Coolant drain line with valve

Exhaust

Base, formed steel with single wall integral 8-hour fuel tank

Standard open set fuel tank/base supplied

Exhaust flange outlet

Fuel

Secondary fuel filters

Primary fuel filter with integral water separator

Fuel priming pump

Fuel System

Primary fuel filter w/integral water separator and secondary filter

Fuel priming pump

Engine fuel transfer pump

Flexible fuel lines

Fuel cooler

Generator

Matched to the performance and output characteristics of Cat engines

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

IP23 Protection

Power Termination

Busbar

Generator and Attachments

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

Integrated voltage regulator (IVR)

Segregated low voltage (AC/DC) wiring panel

Optional LC Frame generator - IP23 Protection

Power center, IP22

A Frame generator - IP21 Protection

Mounting

Rubber vibration isolators

Governing System

Cat electronic governor (ADEM A4).

Lube System

Oil cooler

Oil drain valves

Mounting System

Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Starting/Charging

24 Volt battery with rack and cables

24 volt starting motor

Batteries

General

Engine and alternator pre paint, Caterpillar yellow

Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment

Air Inlet System

Single element air cleaner

Dual element air cleaner

Exhaust

Industrial, residential, critical mufflers

Certifications

EU Certificate of Conformance (CE)

Global certification for CIS

Circuit breakers

Shunt trip for IEC circuit breaker

Padlockable circuit breaker device

4 Pole (IEC-100% rated) Circuit breakers - Motorised

Auxiliary contacts, circuit breaker

3 Pole (IEC-100% rated) Circuit breakers - Motorised

3 Pole (IEC-100% rated) Circuit breakers - Package mounted

4 Pole (IEC-100% rated) Circuit breakers - Package mounted

Power terminal strip

Generator

Oversize and premium generators

Anti-condensation heater

Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Control Panels

GCCP 1.4

Volt free contacts

Local annunciator

Remote annunciator module

Local alarm horn

Oil temperature displays

Protective devices: Earth fault relay ; Earth leakage Ground fault relay ; Overload shutdown via breaker ; Low fuel level alarm ; Low fuel level shutdown ; High fuel level alarm ; Fuel level sensor

Starting/Charging

Jacket water heater

Charging alternator

Heavy duty starting system

Battery chargers

Oversize batteries

Cooling System

Stone guards

Radiator duct flange

Low coolant temperature alarm

Enclosures

Sound attenuated enclosures

High ambient sound attenuated enclosures

General

Sound attenuated, weather protective or high ambient weather protective enclosure

CSA Certification

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

EEC Declaration of Conformity

Integral & sub-base UL listed dual wall fuel tanks

Automatic transfer switches (ATS)

Single or dual wall sub-base fuel tanks

The following options are based on regional and product configuration:

EU Certificate of Conformance (CE)

Single or dual wall integral fuel tanks

Narrow, wide or skid base

UL 2200 package

Exhaust System

Engine mounted muffler

End in/end out mufflers - 10, 25 and 35 dBA attenuation

6 and 8 inch elbow kit

Manifold and turbocharger guards

Flexible exhaust fittings

6 and 8 inch flange GP

Fuel System

Manual fuel transfer pump

Dual wall fuel tank base

Fuel transfer system controls

Generator and Attachments

Space heaters

Permanent magnet excitation (PMG) generator

Ingress protection

LC frame generator

Oversize A Frame generator

LC frame CIP generator

CIP A Frame generator

Oversize LC frame generator

Lube System

Manual sump pump

Mounting System

Narrow skid base - replaces standard fuel tank base

Special Test / Reports

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Starting / Charging System

5 Amp single Battery charger

Battery disconnect switch

Jacket water heater

    Send an Enquiry