-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
300 ekW
Minimum Rating
180 ekW
Emissions/Fuel Strategy
EU Stage IIIA, Low Fuel
Voltage
220 to 480 Volts
Frequency
60 Hz
Speed
1800 rpm
Duty Cycle
Standby, Prime
Engine Model
C9 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
4.41in
Stroke
5.87in
Displacement
537.01in³
Compression Ratio
16.1:1
Aspiration
Air to Air Aftercooled
Fuel System
Hydraulic electronic unit injection
Governor Type
Adem™A4
Length - Maximum
157in
Width - Maximum
47.5in
Height - Maximum
73.5in
Certifications
European Certificate for Conformance
Global Certification for CIS
Air inlet system
Single element air cleaner
Circuit breakers
4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps
Control Panels
Oil temperature displays
Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor
Cooling System
Radiator duct flange
Low coolant temperature alarm
Enclosures
Sound attenuated enclosure
High ambient sound attenuated enclosure
Exhaust System
Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
5 and 6 inch elbow kits
6 inch flange
5 - 6 inch flange adaptor
Fuel System
Integral dual wall fuel tank base
Generators and Attachments
Permanent magnet excitation (PMG) generator
Oversize, AREP, CIP generators
Mounting System
Narrow skid base
Starting / Charging System
Battery disconnet switch
Jacket water heater
5 Amp single Battery charger
Air Inlet System
Air cleaner, light duty with disposable paper filter
Turbocharger
Air cleaner, light duty with disposable paper filter
Control Panels
GCCP 1.3
EMCP4.4 control panel
Cooling System
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Caterpillar extended life coolant
Radiator and cooling fan with guard
Exhaust System
Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
Flange for customer; shipped loose
Stainless steel exhaust flex, gaskets, rain cap and SAE exhaust
Fuel System
Standard open set fuel tank/base supplied
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank/base supplied
Base, formed steel with single wall integral 8-hour fuel tank
Generators and Generator Attachments
Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
Power centre, IP22
Voltage regulator (single phase sensing)
12 Leads
IP23 Protection
Segregated low voltage (AC/DC) wiring panel
IP23 Protection
12 Leads
Governing System
Cat electronic governor (ADEM A4)
Cat electronic governor (ADEM A4)
Lube System
Oil cooler
Lubricating oil
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator
Includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging System
24V battery with rack and cables
General
Engine and alternator re-paint, Caterpillar yellow
Engine and alternator re-paint, Caterpillar yellow
ALL
Air Inlet System
Air cleaner, light duty with disposable paper filter
Turbocharger
Air cleaner, light duty with disposable paper filter
Control Panels
GCCP 1.3
EMCP4.4 control panel
Cooling System
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Caterpillar extended life coolant
Radiator and cooling fan with guard
Exhaust System
Stainless steel exhaust flex, gaskets, rain cap & SAE exhaust flange for customer use - shipped loose
Flange for customer; shipped loose
Stainless steel exhaust flex, gaskets, rain cap and SAE exhaust
Fuel System
Standard open set fuel tank/base supplied
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank/base supplied
Base, formed steel with single wall integral 8-hour fuel tank
Generators and Generator Attachments
Mandatory option circuit breaker, IEC, 3 pole mounted in power centre
Power centre, IP22
Voltage regulator (single phase sensing)
12 Leads
IP23 Protection
Segregated low voltage (AC/DC) wiring panel
IP23 Protection
12 Leads
Governing System
Cat electronic governor (ADEM A4)
Cat electronic governor (ADEM A4)
Lube System
Oil cooler
Lubricating oil
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator
Includes lifting provisions and termination points for coolant and lube oil drain lines
Starting / Charging System
24V battery with rack and cables
General
Engine and alternator re-paint, Caterpillar yellow
Engine and alternator re-paint, Caterpillar yellow
Optional Equipment
Certifications
European Certificate for Conformance
Global Certification for CIS
Air inlet system
Single element air cleaner
Circuit breakers
4 Pole (IEC-100% rated) Circuit breaker upgrades: 400, 630, 800 and 100 amps
Control Panels
Oil temperature displays
Control panel protective devices: Earth fault relay ; Earth leakage ground fault ; overload shutdown via breaker ; Low fuel level shutdown ; Low fuel level alarm ; Fuel level sensor
Cooling System
Radiator duct flange
Low coolant temperature alarm
Enclosures
Sound attenuated enclosure
High ambient sound attenuated enclosure
Exhaust System
Mufflers - End in/end out; 10 dBA or 25 dBA attenuation
5 and 6 inch elbow kits
6 inch flange
5 - 6 inch flange adaptor
Fuel System
Integral dual wall fuel tank base
Generators and Attachments
Permanent magnet excitation (PMG) generator
Oversize, AREP, CIP generators
Mounting System
Narrow skid base
Starting / Charging System
Battery disconnet switch
Jacket water heater
5 Amp single Battery charger