-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
605 kVA
Minimum Rating
605 kVA
Emissions/Fuel Strategy
Non Regulated
Voltage
380 to 415 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby
Engine Model
C15 In-line 6, 4-cycle diesel
Bore
5.4in
Stroke
6.8in
Displacement
928in³
Compression Ratio
16.1:1
Aspiration
Turbocharged Air-to-Air Aftercooled
Fuel System
EUI
Governor Type
Adem™A4
Length - Maximum
131in
Width - Maximum
60.6in
Height - Maximum
86.1in
Dry Weight - Genset (maximum)
8120lb
Exhaust
Industrial, residential, critical mufflers
Control panel
Speed and Voltage adjust potentiometers
PLG 4G/3G/Ethernet
Annunciator
Emergency E-Stop
Enclosure
Cat GC enclosure
Generator
Anti-condensation heater
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Electrical Options
4 Pole Circuit breaker
Auxiliary contacts
Padlockable circuit breaker
Battery charger
Wet battery
Power Termination
Circuit breakers, IEC compliant
Circuit breakers, UL listed
Alternator
Space heater
AVR
Fuel System
Dual wall 8 hour fuel tank
Single wall 8 hour fuel tank with spill containment
Low fuel level shutdown
Low and high fuel level alarms
Manual fuel transfer pump
Fuel transfer system controls
Dual wall fuel tank base
Generator and Attachments
Oversize A Frame generator
LC frame CIP generator
Permanent magnet excitation (PMG) generator
Space heaters
Ingress protection
LC frame generator
A Frame generator - IP21 Protection
CIP A Frame generator
Oversize LC frame generator
Starting/Charging
Charging alternator
Jacket water heater
Battery chargers
Oversize batteries
Heavy duty starting system
24 Volt battery with rack and cables
Air inlet system
Single stage air filter
Dual element air filter
Certifications
EU Certificate of Conformance (CE)
EAC Certification
General
Automatic transfer switches (ATS)
EEC Declaration of Conformity
Integral & sub-base UL listed dual wall fuel tanks
Single or dual wall sub-base fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
CSA Certification
UL 2200 package
The following options are based on regional and product configuration:
Single or dual wall integral fuel tanks
EU Certificate of Conformance (CE)
Sound attenuated, weather protective or high ambient weather protective enclosure
Narrow, wide or skid base
Extended service coverage
3, 4, 5 and 10 Years
Enclosures
High ambient sound attenuated enclosures
Exhaust System
Industrial silencer
10 dBA Attenuation silencer
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Flexible exhaust fittings
6 and 8 inch elbow kit
6 and 8 inch flange GP
Engine mounted muffler
Lube System
Manual sump pump
Mounting System
Narrow skid base - replaces standard fuel tank base
Special Test / Reports
PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
5 Amp single Battery charger
Battery disconnect switch
Jacket water heater
Engine
Cat® C15 Inline 6 cylinder, 4 stroke diesel
Control Panels
GCCP 1.1
Air Inlet
Air cleaner
Governor
Mechanical governor
Alternator
A Frame standard alternator
Cooling
Package mounted radiator
Fuel Storage
Single wall 8 hour fuel tank
Cooling System
Caterpillar extended life coolant
Radiator and cooling fan with guards
Fan drive, battery charging alternator drive
Electrical Options
3 Pole Circuit breaker
Neutral earth link
24 Volt battery with rack and cables
Fuel
Secondary fuel filters
Fuel priming pump
Primary fuel filter with integral water separator
Air inlet system
Air cleaner; light duty with disposable element
Generator
IP23 Protection
Matched to the performance and output characteristics of Cat engines
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Lube system
Lubricating oil
Oil drain line with valve
Mounting system
Captive linear vibration isolators
Lifting provision and drag points
General
Engine and alternator pre paint, Caterpillar yellow
Engine and alternator pre paint, Caterpillar yellow
Power Termination
Busbar
Generator and Attachments
Power center, IP22
Segregated low voltage (AC/DC) wiring panel
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
Mounting
Rubber vibration isolators
Governing System
Cat electronic governor (ADEM A4).
Lube System
Oil cooler
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
ALL
Engine
Cat® C15 Inline 6 cylinder, 4 stroke diesel
Control Panels
GCCP 1.1
Air Inlet
Air cleaner
Governor
Mechanical governor
Alternator
A Frame standard alternator
Cooling
Package mounted radiator
Fuel Storage
Single wall 8 hour fuel tank
Cooling System
Caterpillar extended life coolant
Radiator and cooling fan with guards
Fan drive, battery charging alternator drive
Electrical Options
3 Pole Circuit breaker
Neutral earth link
24 Volt battery with rack and cables
Fuel
Secondary fuel filters
Fuel priming pump
Primary fuel filter with integral water separator
Air inlet system
Air cleaner; light duty with disposable element
Generator
IP23 Protection
Matched to the performance and output characteristics of Cat engines
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Lube system
Lubricating oil
Oil drain line with valve
Mounting system
Captive linear vibration isolators
Lifting provision and drag points
General
Engine and alternator pre paint, Caterpillar yellow
Engine and alternator pre paint, Caterpillar yellow
Power Termination
Busbar
Generator and Attachments
Power center, IP22
Segregated low voltage (AC/DC) wiring panel
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
Mounting
Rubber vibration isolators
Governing System
Cat electronic governor (ADEM A4).
Lube System
Oil cooler
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Optional Equipment
Exhaust
Industrial, residential, critical mufflers
Control panel
Speed and Voltage adjust potentiometers
PLG 4G/3G/Ethernet
Annunciator
Emergency E-Stop
Enclosure
Cat GC enclosure
Generator
Anti-condensation heater
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Electrical Options
4 Pole Circuit breaker
Auxiliary contacts
Padlockable circuit breaker
Battery charger
Wet battery
Power Termination
Circuit breakers, IEC compliant
Circuit breakers, UL listed
Alternator
Space heater
AVR
Fuel System
Dual wall 8 hour fuel tank
Single wall 8 hour fuel tank with spill containment
Low fuel level shutdown
Low and high fuel level alarms
Manual fuel transfer pump
Fuel transfer system controls
Dual wall fuel tank base
Generator and Attachments
Oversize A Frame generator
LC frame CIP generator
Permanent magnet excitation (PMG) generator
Space heaters
Ingress protection
LC frame generator
A Frame generator - IP21 Protection
CIP A Frame generator
Oversize LC frame generator
Starting/Charging
Charging alternator
Jacket water heater
Battery chargers
Oversize batteries
Heavy duty starting system
24 Volt battery with rack and cables
Air inlet system
Single stage air filter
Dual element air filter
Certifications
EU Certificate of Conformance (CE)
EAC Certification
General
Automatic transfer switches (ATS)
EEC Declaration of Conformity
Integral & sub-base UL listed dual wall fuel tanks
Single or dual wall sub-base fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
CSA Certification
UL 2200 package
The following options are based on regional and product configuration:
Single or dual wall integral fuel tanks
EU Certificate of Conformance (CE)
Sound attenuated, weather protective or high ambient weather protective enclosure
Narrow, wide or skid base
Extended service coverage
3, 4, 5 and 10 Years
Enclosures
High ambient sound attenuated enclosures
Exhaust System
Industrial silencer
10 dBA Attenuation silencer
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Flexible exhaust fittings
6 and 8 inch elbow kit
6 and 8 inch flange GP
Engine mounted muffler
Lube System
Manual sump pump
Mounting System
Narrow skid base - replaces standard fuel tank base
Special Test / Reports
PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
5 Amp single Battery charger
Battery disconnect switch
Jacket water heater