402

G3520C Gas Generator

G3520C Gas Generator

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Continuous Rating

2050 ekW

Fuel Type

Natural Gas, Biogas, Coal Gas

Maximum Electrical Efficiency

40.10%

Maximum Standby Rating

2050

Frequency

50 / 60 Hz

RPM

1200 / 1500 / 1800 rpm

Engine Model

G3520C

Displacement

5270in³

Aspiration

TA

Bore

6.7in

Stroke

7.5in

Length

249in

Width

79in

Height

92in

Dry Weight - Genset

37959lb

Fuel System

Natural Gas, Biogas, Coal Gas

Compression Ratio

11.3

Weight

37953lb

Air Inlet

Enclosure Mounting Brackets and Piping

Mounting stand

Air cleaner with precleaner

Contol Panel

Custom 8-Light Alarm Module

Local NFPA99-110 Alarm Module w/LEDs

Remote 24-32V 8/16 Annunciator

Synchronizing Module

PL1000E/PL1000T Communications Module

Engine Failure Relay

Control Panels

Local alarm module

Cooling

Inlet/Outlet connections

Engine pumps

Aftercooler air lines, aftercooler core replacement

Jacket water coolant heater

Exhaust

Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges

Exhaust expanders

Flexible fittings

305/360/406 mm Elbow Kits

Fuel System

14-69 kPa (2-10 psi) gas pressure regulator

Fuel filter

24V DC Gas shutoff valve

207-276kPa, 30-40 psi gas knockdown regulator

Generator

Generator Removal

Annunciator Modules

Medium and high voltage generators and attachment

60 Hz--480/4160 Volt Generator Options

Cable access box

Generator air filter

European Bus Bars

Low voltage extension box

Bearing temperature detectors

8.7/15 kV Class  Current Transformers (CCCT, DCT, CT)

50 Hz--3300/6600 Volt Generator Options

Governing System

Load share module

Starting/Charging

Jacket water heater

Battery diconnect switch

24V starting motors

Battery with cables and rack (shipped loose)

60A, 24V charging alternator (requires engine driven pumps)

Air Inlet

Two-element single-stage air cleaner with enclosure and service indicator

Control Panels

EMCP 4.3

Cooling

ANSI Class 6 in/DN customer flange connections for JW inlet and outlet

Engine driven water pumps for jacket water and aftercooler

2nd Stage SCAC-Cat Flange

Jacket water and SCAC driven pumps

Jacket water and SCAC thermostat and outlet--ANSI 6 in/DN150

Exhaust

Dry exhaust manifolds, insulated and shielded

Cat-flanged face outlet on turbocharger

Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns

Fuel System

Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Electronic fuel metering valve, ANSI flange

Throttle plate, 24V DC actuator, controlled by GECM

24V ETR Gas Shutoff Valve

Ignition System

Electronic Ignition System (controlled by GECM) 

Individual Cylinder Detonation Sensitive Timing (DST) 

Generator

3-phase brushless, salient pole

Class F Insulation & temperature rise

Reactive droop 

Permanent Magnet Excitiation

Winding temperature detectors

Anti-condensation space heater

SR4B or SR5

Busbar connections

Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

SR4B

General

Crankshaft Vibration Damper and Guard

RH Service

Parts Book

Operation and maintenance manuals

Paint - Caterpillar Yellow except rails and radiators gloss black

ALL

Air Inlet

Two-element single-stage air cleaner with enclosure and service indicator

Control Panels

EMCP 4.3

Cooling

ANSI Class 6 in/DN customer flange connections for JW inlet and outlet

Engine driven water pumps for jacket water and aftercooler

2nd Stage SCAC-Cat Flange

Jacket water and SCAC driven pumps

Jacket water and SCAC thermostat and outlet--ANSI 6 in/DN150

Exhaust

Dry exhaust manifolds, insulated and shielded

Cat-flanged face outlet on turbocharger

Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns

Fuel System

Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve

Electronic fuel metering valve, ANSI flange

Throttle plate, 24V DC actuator, controlled by GECM

24V ETR Gas Shutoff Valve

Ignition System

Electronic Ignition System (controlled by GECM) 

Individual Cylinder Detonation Sensitive Timing (DST) 

Generator

3-phase brushless, salient pole

Class F Insulation & temperature rise

Reactive droop 

Permanent Magnet Excitiation

Winding temperature detectors

Anti-condensation space heater

SR4B or SR5

Busbar connections

Caterpillar's Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control

SR4B

General

Crankshaft Vibration Damper and Guard

RH Service

Parts Book

Operation and maintenance manuals

Paint - Caterpillar Yellow except rails and radiators gloss black

Optional Equipment

Air Inlet

Enclosure Mounting Brackets and Piping

Mounting stand

Air cleaner with precleaner

Contol Panel

Custom 8-Light Alarm Module

Local NFPA99-110 Alarm Module w/LEDs

Remote 24-32V 8/16 Annunciator

Synchronizing Module

PL1000E/PL1000T Communications Module

Engine Failure Relay

Control Panels

Local alarm module

Cooling

Inlet/Outlet connections

Engine pumps

Aftercooler air lines, aftercooler core replacement

Jacket water coolant heater

Exhaust

Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges

Exhaust expanders

Flexible fittings

305/360/406 mm Elbow Kits

Fuel System

14-69 kPa (2-10 psi) gas pressure regulator

Fuel filter

24V DC Gas shutoff valve

207-276kPa, 30-40 psi gas knockdown regulator

Generator

Generator Removal

Annunciator Modules

Medium and high voltage generators and attachment

60 Hz--480/4160 Volt Generator Options

Cable access box

Generator air filter

European Bus Bars

Low voltage extension box

Bearing temperature detectors

8.7/15 kV Class  Current Transformers (CCCT, DCT, CT)

50 Hz--3300/6600 Volt Generator Options

Governing System

Load share module

Starting/Charging

Jacket water heater

Battery diconnect switch

24V starting motors

Battery with cables and rack (shipped loose)

60A, 24V charging alternator (requires engine driven pumps)

    Send an Enquiry