402

C175-20

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Standby Rating

4000(no fan)/3900 kVA

Prime Power Rating

3600(no fan)/3500 kVA

Emissions/Fuel Strategy

Low Fuel, Low Emissions

Voltage

400 to 11000 Volts

Frequency

50 Hz

Speed

1500 RPM

Duty Cycle

Standby, Mission Critical, Prime, Continuous

Maximum Rating

4000 kVA

Minimum Rating

3150 kVA

Engine Model

C175-20 SCAC, V-20, 4-Stroke Water-Cooled Diesel

Bore

6.89in

Stroke

8.66in

Displacement

6456.31in³

Compression Ratio

15.3:1

Aspiration

Turbo Aftercooled

Fuel System

Common Rail

Governor Type

ADEM� A4

Length - Minimum

264.2in

Length - Maximum

330.8in

Width - Minimum

85.1in

Width - Maximum

127.8in

Height - Minimum

87.6in

Height - Maximum

150.7in

Dry Weight - Genset (minimum)

55100lb

Dry Weight - Genset (maximum)

66200lb

Air Inlet Systems

Single element air cleaner

Control Panels

EMCP 4.4

Controller and MV and HV power connection locations

Load share module

Controller voltage and current sensing groups

Speed adjust

Annunciator modules

Customer interface options

Generator temperature monitoring

E-Stop

Interconnect harness

Generator harness

Modbus monitoring of packages

Vandal proof panel door

Cooling System

Package mounted radiators

Remote radiators

Fuel cooler

Crankcase Systems

Explosive relief valves

Crankcase ventilation system

Exhaust System

Front housing - Standby or mission critical

Front housing - Prime or continuous

Exhaust collectors/manifold

Mufflers (15, 25 and 34 dBA)

Fuel System

Primary fuel filter

Generators and Attachments

Medium voltage - 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667

Thermostat for space heater

Generator air cleaner

Differential current transformers - (5, 9 and 15 kV Class)

Instrumentation

Pyrometer and thermocouples

Lube System

Lube oil heater

Lube oil heater with Crankcase explosion relief valves

Drain group oil pans

Lubricating oil

Electric prelube pumps

Oil filters

Mounting System

Rubber anti-vibration mounts

Spring type linear vibration isolators

IBC vibration isolators - Shipped loose

Special Tests / Reports

Generator test report

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Standard genset TVA (Torsional Vibration Analysis) report

Custom generator TVA report

Special test charge - Engine only

Genset fuel consumption test

Standard engine test charge

Starting / Charging System

24 Volt electric starting motor

Air starting motor

Air pressure regulator

Starter location covers

24 Volt battery set - Dry

20, 35 and 50 Amp Battery chargers

Charging alternators - Dry

Jacket water heaters

General

Special paint - 3500, Colors (other than Caterpillar yellow or high performance paints)

US aid emblem

Service tools

Engine barring group

Manual

Engine barring air powered

control GP - air powered bar group

Air Inlet

4 x Single element canister air cleaners with service indicator(s).

Control Panel

Engine cycle crank

Oil pressure (psi, kPa or bar)

Digital Indicators

Coolant temperature

Environmental sealed front face

Frequency (Hz)

True RMS AC metering, 3-phase, +/-2% accuracy

Text alarm/event descriptions

Low coolant level

Volts (L-L & L-N)

Auto/start/stop control

Warning/shutdown Indicators:

Emergency stop pushbutton

Engine cool-down timer

DC volts

High coolant temperature

Operating hours

Low oil pressure

Cat ECS 100

Amps (per phase & average)

4 Programmable relay Inputs

Alarm acknowledge

4 Programmable relay output

Failure to start (overcrank)

Overspeed

Lamp test

24 Volt DC operation

Wall mounted controls

RPM

Cooling System

SCAC cooling

Coolant sensors

JW Inlet: 6" ANSI / JW Outlet: 5" Cat Flange

AC Inlet: 6" ANSI / AC Outlet: 3-1/2" ANSI

Exhaust

Dry exhaust manifold

Bolted flange (ANSI 6" & DIN 150) with bellow for each turbo (Qty 4). 50 Hz

Fuel

Filters x 3

Secondary/tertiary fuel filters

4 Micron spin on type

10 Micron spin on type

Engine mounted filters x 3

Primary fuel filter water/fuel water separator

Generators and Attachments

Salient pole

RFI suppression

Anti-condensation space heater

IEC platinum Stator RTDs

Form wound

NEMA Class H insulation

Voltage regulator

Reactive droop capability

Min/max Exciter limiter

3 Phase voltage sensing

Exciter diode monitor

6 Leads

3 Phase brushless

Right side extension box, bottom cable entry

Permanent magnet excitation (PMG)

Class H temperature rise at 40C ambient

Governing System

ADEM A4

Redundant shutdown (Overspeed protection through a duplicate speed sensing system)

Lube System

Oil drain lines and valve

Gear type lube oil pump

Oil filter, filler and dipstick

Integral lube Oil cooler

Lubricating oil

Fumes disposal

Mounting Systems

Rails - Engine/Generator

Rubber anti-vibration mounts - shipped loose

Starting / Charging System

Batteries and battery rack w/cables

Dual 24 volt electric starting motors

Battery disconnect switch

General

SAE standard rotation

Right hand servicing

Paint - Caterpillar yellow with high gloss black rails

ALL

Air Inlet

4 x Single element canister air cleaners with service indicator(s).

Control Panel

Engine cycle crank

Oil pressure (psi, kPa or bar)

Digital Indicators

Coolant temperature

Environmental sealed front face

Frequency (Hz)

True RMS AC metering, 3-phase, +/-2% accuracy

Text alarm/event descriptions

Low coolant level

Volts (L-L & L-N)

Auto/start/stop control

Warning/shutdown Indicators:

Emergency stop pushbutton

Engine cool-down timer

DC volts

High coolant temperature

Operating hours

Low oil pressure

Cat ECS 100

Amps (per phase & average)

4 Programmable relay Inputs

Alarm acknowledge

4 Programmable relay output

Failure to start (overcrank)

Overspeed

Lamp test

24 Volt DC operation

Wall mounted controls

RPM

Cooling System

SCAC cooling

Coolant sensors

JW Inlet: 6" ANSI / JW Outlet: 5" Cat Flange

AC Inlet: 6" ANSI / AC Outlet: 3-1/2" ANSI

Exhaust

Dry exhaust manifold

Bolted flange (ANSI 6" & DIN 150) with bellow for each turbo (Qty 4). 50 Hz

Fuel

Filters x 3

Secondary/tertiary fuel filters

4 Micron spin on type

10 Micron spin on type

Engine mounted filters x 3

Primary fuel filter water/fuel water separator

Generators and Attachments

Salient pole

RFI suppression

Anti-condensation space heater

IEC platinum Stator RTDs

Form wound

NEMA Class H insulation

Voltage regulator

Reactive droop capability

Min/max Exciter limiter

3 Phase voltage sensing

Exciter diode monitor

6 Leads

3 Phase brushless

Right side extension box, bottom cable entry

Permanent magnet excitation (PMG)

Class H temperature rise at 40C ambient

Governing System

ADEM A4

Redundant shutdown (Overspeed protection through a duplicate speed sensing system)

Lube System

Oil drain lines and valve

Gear type lube oil pump

Oil filter, filler and dipstick

Integral lube Oil cooler

Lubricating oil

Fumes disposal

Mounting Systems

Rails - Engine/Generator

Rubber anti-vibration mounts - shipped loose

Starting / Charging System

Batteries and battery rack w/cables

Dual 24 volt electric starting motors

Battery disconnect switch

General

SAE standard rotation

Right hand servicing

Paint - Caterpillar yellow with high gloss black rails

Optional Equipment

Air Inlet Systems

Single element air cleaner

Control Panels

EMCP 4.4

Controller and MV and HV power connection locations

Load share module

Controller voltage and current sensing groups

Speed adjust

Annunciator modules

Customer interface options

Generator temperature monitoring

E-Stop

Interconnect harness

Generator harness

Modbus monitoring of packages

Vandal proof panel door

Cooling System

Package mounted radiators

Remote radiators

Fuel cooler

Crankcase Systems

Explosive relief valves

Crankcase ventilation system

Exhaust System

Front housing - Standby or mission critical

Front housing - Prime or continuous

Exhaust collectors/manifold

Mufflers (15, 25 and 34 dBA)

Fuel System

Primary fuel filter

Generators and Attachments

Medium voltage - 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667

Thermostat for space heater

Generator air cleaner

Differential current transformers - (5, 9 and 15 kV Class)

Instrumentation

Pyrometer and thermocouples

Lube System

Lube oil heater

Lube oil heater with Crankcase explosion relief valves

Drain group oil pans

Lubricating oil

Electric prelube pumps

Oil filters

Mounting System

Rubber anti-vibration mounts

Spring type linear vibration isolators

IBC vibration isolators - Shipped loose

Special Tests / Reports

Generator test report

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Standard genset TVA (Torsional Vibration Analysis) report

Custom generator TVA report

Special test charge - Engine only

Genset fuel consumption test

Standard engine test charge

Starting / Charging System

24 Volt electric starting motor

Air starting motor

Air pressure regulator

Starter location covers

24 Volt battery set - Dry

20, 35 and 50 Amp Battery chargers

Charging alternators - Dry

Jacket water heaters

General

Special paint - 3500, Colors (other than Caterpillar yellow or high performance paints)

US aid emblem

Service tools

Engine barring group

Manual

Engine barring air powered

control GP - air powered bar group

    Send an Enquiry