-
Specifications
-
Standard/Optional Equipment
- Catalog
Frequency
60 Hz
Natural Gas Rating
200 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Engine Model
14.2 L Spark - Ignited
Displacement
864.71in³
Fuel System
Carburetor, Down Draft
Fuel Type
Natural Gas
Speed
1800 rpm
Aspiration
Turbocharged-Aftercooled
Governor Type
Electronic
Compression Ratio
9.5:1
Bore
5.31in
Stroke
6.5in
Length
127.95in
Width
52.93in
Height
67.37in
Weight
5756lb
Starting/Charging
Battery charger – UL Listed 10 amp
Charging alternator
Jacket water heater
Battery heater
General
UL 2200 package
Enclosures: sound attenuated, weather protective
CSA Certification
Suitable for Use as Service Equipment (SUSE)
Automatic transfer switches (ATS)
Generator
Shunt trip and auxiliary contact breaker
Thermal magnetic or electronic trip MCCBs
Anti-condensation heater
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater
Oversize and premium generators
Cooling
Factory-installed radiator
Closed coolant recovery system
50/50 Ethylene glycol antifreeze
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Fuel pressure test po
Primary and secondary fuel shut-off
Low fuel pressure switch
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Exhaust
Exhaust outlet with 3” pipe
Generator
Full load capacity alternator
Permanent magnet excitation
Class H insulation material
Integrated Voltage Regulator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Engine electrical system
Solenoid activated starter motor
Battery cables
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
12 volt starting motor
Batteries with rack and cables
ALL
Cooling
Factory-installed radiator
Closed coolant recovery system
50/50 Ethylene glycol antifreeze
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Fuel pressure test po
Primary and secondary fuel shut-off
Low fuel pressure switch
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Exhaust
Exhaust outlet with 3” pipe
Generator
Full load capacity alternator
Permanent magnet excitation
Class H insulation material
Integrated Voltage Regulator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Engine electrical system
Solenoid activated starter motor
Battery cables
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
12 volt starting motor
Batteries with rack and cables
Optional Equipment
Starting/Charging
Battery charger – UL Listed 10 amp
Charging alternator
Jacket water heater
Battery heater
General
UL 2200 package
Enclosures: sound attenuated, weather protective
CSA Certification
Suitable for Use as Service Equipment (SUSE)
Automatic transfer switches (ATS)
Generator
Shunt trip and auxiliary contact breaker
Thermal magnetic or electronic trip MCCBs
Anti-condensation heater
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater
Oversize and premium generators