402

Cat<sup>?�</sup> C9.3B Industrial Power Unit HRC

The Cat?� C9.3B Industrial Diesel Power Unit is offered in ratings ranging from 250-340 kW (335-456 hp) @ 1800-2200 rpm and meet U.S. EPA Tier 4 Final, EU Stage V emission, China Nonroad Stage IV, Japan 2014 (Tier 4 Final) and Korea Stage V standards. Conveniently pre-configured for a wide range of applications, the Cat?� Industrial Power Unit is a complete power package containing a radiator, flywheel, alternator and alternator wiring completely pre-assembled for fast, straightforward installation in a number of OEM, customer and packager applications. These fuel efficient units are ready made for irrigation, industrial, mining and other pump applications.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Maximum Power

456hp

Maximum Torque

1540lb-ft @ 1400 rpm

Rated Speed

1800-2200 rpm

Minimum Power

335hp

Emissions

EU Stage V, U.S. EPA Tier 4 Final, Korea Stage V, Japan 2014 (Tier 4 Final) and China Nonroad IV

Engine Configuration

Inline 6, 4-Stroke-Cycle-Diesel

Bore

4.5in

Stroke

5.9in

Displacement

567.5in³

Compression Ratio

17.0:1

Aspiration

Turbocharged Aftercooled (TA)

Rotation from Flywheel End

Counterclockwise

Aftertreatment

DOC+DPF+SCR

Length

83in

Width

43in

Height

68.5in

Weight

3563lb

Width

34.3in

Height

22.4in

Diameter

13in

Weight

468lb

Air Inlet System

Turbocharged

Air-to-Air Aftercooled

Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad Stage IV and Korea Stage V)

Control System

Electronic control system

Over-foam wiring harness

Automatic altitude compensation

Power compensated for fuel temperature

Configurable software features

Engine monitoring system SAE J1939 broadcast and control

Integrated Electronic Control Unit (ECU)

Remote fan control

Cooling System

Vertical or RH thermostat outlet

Centrifugal water pump

Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

Dual rear PTO configuration

Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) China Nonroad Stage IV and Korea Stage V

Fuel System

Electronic high pressure common rail

Primary fuel filter

Secondary fuel filters

Fuel transfer pump

Electronic fuel priming

Lube System

Open crankcase ventilation system

Oil cooler

Oil filler

Lube oil filter

Oil dipstick

Gear driven oil pump

Choice of front, rear or center sumps

Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad IV, Korea Stage V)

Power Take Off (PTO)

SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

Vibration damper

Lifting eyes

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment

Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

Pump Electronic Control Unit (PETU)

Available in 12V or 24V systems

Selective Catalytic Reduction (SCR)

ALL

Air Inlet System

Turbocharged

Air-to-Air Aftercooled

Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad Stage IV and Korea Stage V)

Control System

Electronic control system

Over-foam wiring harness

Automatic altitude compensation

Power compensated for fuel temperature

Configurable software features

Engine monitoring system SAE J1939 broadcast and control

Integrated Electronic Control Unit (ECU)

Remote fan control

Cooling System

Vertical or RH thermostat outlet

Centrifugal water pump

Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

Dual rear PTO configuration

Available SAE No. 1 power take off with optional SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) China Nonroad Stage IV and Korea Stage V

Fuel System

Electronic high pressure common rail

Primary fuel filter

Secondary fuel filters

Fuel transfer pump

Electronic fuel priming

Lube System

Open crankcase ventilation system

Oil cooler

Oil filler

Lube oil filter

Oil dipstick

Gear driven oil pump

Choice of front, rear or center sumps

Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), China Nonroad IV, Korea Stage V)

Power Take Off (PTO)

SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

Vibration damper

Lifting eyes

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment/ Clean Emissions Control Equipment

Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)

Pump Electronic Control Unit (PETU)

Available in 12V or 24V systems

Selective Catalytic Reduction (SCR)

    Send an Enquiry