-
Specifications
-
Standard/Optional Equipment
Maximum Power
111.3hp
Maximum Torque
308lb-ft @ 1400 rpm
Rated Speed
2200-2400 rpm
Minimum Power
72.4hp
Emissions
UN ECE R96 Stage IIIA
Engine Configuration
Inline 4, 4-Stroke-Cycle Diesel
Bore
4.1in
Stroke
5in
Displacement
269in³
Compression Ratio
18.2:1
Aspiration
Naturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)
Combustion System
Direct Injection
Rotation from Flywheel End
Counterclockwise
Aftertreatment
-
Length
26.1in
Width
23.7in
Height
30.5in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments
674.6lb
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator
Starter motor
Control Panel
Glow plug starting aid
Cooling System
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix
Flywheels and Flywheel Housing
SAE No. 3 flywheel housing
Flywheel and starter rings
Fuel System
Fuel filter positions
Lube System
Lubricating oil filters and breathers
Oil filter positions
Lube oil sump
Power Take Off
SAE B Power Take Off (PTO)
General
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring
Paint: Caterpillar yellow, with optional colors available at request
ALL
Air Inlet System
Inlet manifold with choice of inlets.
Control System
Alternator
Starter motor
Control Panel
Glow plug starting aid
Cooling System
Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
50:50 water glycol mix
Flywheels and Flywheel Housing
SAE No. 3 flywheel housing
Flywheel and starter rings
Fuel System
Fuel filter positions
Lube System
Lubricating oil filters and breathers
Oil filter positions
Lube oil sump
Power Take Off
SAE B Power Take Off (PTO)
General
Timing case and gear-driven auxiliaries
Belt-driven auxiliaries
Engine mountings
Gauges
Displays
Power and torque curve tailoring
Paint: Caterpillar yellow, with optional colors available at request