-
Specifications
-
Standard/Optional Equipment
- Catalog
Power Range
2000-3385 bhp (1492-2525 bkW)
Speed Range
1200-1800 rpm
Emissions
IMO II
Aspiration
TTA
Bore
8.46in
Stroke
7.48in
Displacement
4765in³
Rotation from Flywheel End
Counterclockwise or Clockwise
Configuration
V 16, 4-Stroke-Cycle Diesel
Minimum Height
77.4in
Maximum Length
148in
Maximum Width
84.3in
Minimum Length
143.1in
Maximum Height
84.6in
Air Inlet System
Air Cleaner Removal
Remote Air Inlet Adapters
Charging System
Battery Chargers
Charging Alternators
Control System
Throttle Position Sensor
Throttle Synchronization
Cooling System
Water Level Switch Gauge
Coolant Level Sensors
Connections
Keel Cooling Conversions
Heat Exchangers
Auxiliary Water Pumps
Sea Water Pump Removal
Coolant Shunt Tanks
Air Separator
Marine Gear Cooling
Exhaust System
Exhaust Outlet
Flexible Fittings
Elbows
Flanges
Flange and Exhaust Expanders
Mufflers
Fuel System
Fuel Cooler
Fuel Priming Pumps
Flexible Fuel Lines
Rigid Fuel Lines
Primary Fuel Filter
Fuel level switch
Instrumentation
PL1000T Communication Module
PL1000E Communication Module
Customer Interface
Thermocouples
Remote Panel Display
Remote Cylinder Temperature Display
Pilot House Instrument Panels
Marine Gear Sensors
Engine Vision Display System
Lube System
Oil Pan
Oil Pan Accessories
Sump Pumps
Prelubrication Options
Lubricating Oil
CENTRIFUGAL OIL FILTER
Mounting System
Engine Supports
Vibration Isolation Mountings
Power Take-Offs
Flexible Coupling and Guards
Front Housing Accessories
Upper Left Hand Front Location:
Upper Right Hand Front Location:
Upper Right Hand Rear Location:
Lower Left Hand Front Location:
Lower Left Hand Rear Location:
Front Housing Accessory Drives
Upper LH Accessory Drive
Upper RH Accessory Drive
Front Power Take Offs
Crankshaft Pulleys
Damper Guard Removals
Protection System
Air Inlet Shutoffs
Switches and Contactors
Explosion Relief Valve
Sensors
Spare Parts Kits
Parts Kits
Pump Kits
Fuel Transfer
Lube Oil
Special Appearance
Chrome Plated Relief Valves
Black Air Cleaners
Starting System
Starting Motors or Barring Device
Air Starting Motors Options
Starting Aids
Battery Sets - 24 Volt - Dry
Battery Rack
General
Tool Set
Caterpillar Datalink Wire
Air Inlet System
Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
Control System
Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
Cooling System
Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
ECU Functions
Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
Exhaust System
Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
Fuel System
Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
Instrumentation
Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
Lube System
Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
Power Take-Offs
Accessory drive, two-sided front housing
Protection System
Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
General
Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
ISO Certification
Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.
ALL
Air Inlet System
Corrosion resistant separate circuit freshwater aftercooled, powercore air cleaner
Control System
Dual Caterpillar® A3 Electronic Control Unit (ECU) LH with electronic unit injector fuel system rigid wiring harness (10 amp DC power required to drive ECU)
Cooling System
Gear-driven centrifugal auxiliary sea water pump, geardriven centrifugal jacket water pump, expansion tank for commercial engines, coolant shunt tank on lightweight engines, engine oil cooler, thermostats and housing.
ECU Functions
Programmable low idle, SAEJ1939 data link, Cat® data link, engine diagnostics, general alarm relay, programmable parameters (system application and tattletales), Caterpillar ET service tool interface, remote shutdown, shutdown notify, load feedback, overspeed shutdown, overspeed verify
Exhaust System
Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with watercooled bearings and heat shield. Wastegate on select ratings
Fuel System
Electronically controlled unit injectors, simplex fuel filter (RH) with service indicators, fuel transfer pump
Instrumentation
Marine Power Display of: Engine oil pressure, engine water temperature, fuel pressure, engine speed, fuel consumption, overspeed shutdown notification light, prelube and shutdown override
Lube System
Gear-driven pump, top-mounted dual crankcase breather groups, simplex oil filter, oil filler and dipstick
Power Take-Offs
Accessory drive, two-sided front housing
Protection System
Emergency stop pushbutton, safety shutoff, oil pressure, and water temperature
General
Two lifting eyes mounted to cylinder heads, Caterpillar yellow paint, parts books and maintenance manuals, shrink-wrap.
ISO Certification
Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities.
Optional Equipment
Air Inlet System
Air Cleaner Removal
Remote Air Inlet Adapters
Charging System
Battery Chargers
Charging Alternators
Control System
Throttle Position Sensor
Throttle Synchronization
Cooling System
Water Level Switch Gauge
Coolant Level Sensors
Connections
Keel Cooling Conversions
Heat Exchangers
Auxiliary Water Pumps
Sea Water Pump Removal
Coolant Shunt Tanks
Air Separator
Marine Gear Cooling
Exhaust System
Exhaust Outlet
Flexible Fittings
Elbows
Flanges
Flange and Exhaust Expanders
Mufflers
Fuel System
Fuel Cooler
Fuel Priming Pumps
Flexible Fuel Lines
Rigid Fuel Lines
Primary Fuel Filter
Fuel level switch
Instrumentation
PL1000T Communication Module
PL1000E Communication Module
Customer Interface
Thermocouples
Remote Panel Display
Remote Cylinder Temperature Display
Pilot House Instrument Panels
Marine Gear Sensors
Engine Vision Display System
Lube System
Oil Pan
Oil Pan Accessories
Sump Pumps
Prelubrication Options
Lubricating Oil
CENTRIFUGAL OIL FILTER
Mounting System
Engine Supports
Vibration Isolation Mountings
Power Take-Offs
Flexible Coupling and Guards
Front Housing Accessories
Upper Left Hand Front Location:
Upper Right Hand Front Location:
Upper Right Hand Rear Location:
Lower Left Hand Front Location:
Lower Left Hand Rear Location:
Front Housing Accessory Drives
Upper LH Accessory Drive
Upper RH Accessory Drive
Front Power Take Offs
Crankshaft Pulleys
Damper Guard Removals
Protection System
Air Inlet Shutoffs
Switches and Contactors
Explosion Relief Valve
Sensors
Spare Parts Kits
Parts Kits
Pump Kits
Fuel Transfer
Lube Oil
Special Appearance
Chrome Plated Relief Valves
Black Air Cleaners
Starting System
Starting Motors or Barring Device
Air Starting Motors Options
Starting Aids
Battery Sets - 24 Volt - Dry
Battery Rack
General
Tool Set
Caterpillar Datalink Wire