-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
600BHP
Rated Speed
1800rpm
Emissions
Rich Burn: EPA NSPS Site Compliant Capable with Caterpillar Supplied AFRC and Customer Supplied Aftertreatment
Minimum Rating
600BHP
Compression Ratio
8.3:1
Aspiration
Turbocharged - Aftercooled
Rotation from Flywheel End
Counterclockwise
Flywheel and Flywheel Housing
SAE No. 14 or 18, Flywheel Housing SAE No. 0
Flywheel Teeth
136
Displacement
1648in³
Oil Change Interval
750 hours
Ignition, Protection
Electronic ADEM A4
Air/Fuel Ratio Control
Electronic ADEM A4
Stroke
6in
Bore
5.4in
Cooling System
20gal (US)
Lube Oil System - Refill
45gal (US)
Length
80.19in
Width
59.65in
Height
66.97in
Weight - Dry
6250lb
Charging Alternator
24V, 35A CSA alternator
Exhaust System
Exhaust flex fitting
Exhaust elbow
Exhaust flange — ANSI
Instrumentation
Operator interface panel
Operator interface panel enclosure
15', 20', 50' interconnect harness
Starting System
Air pressure regulator
Air start silencer
Vane starter
Electric starter
Turbine starter
Fuel System
Fuel filter
Air Inlet System
Precleaner
Rain cap
Air Inlet System
Air cleaner — single element with service indicator
Optional air inlet adapter and rain cap — recommended for weather protection
Control System
ADEM A4
Class 1, Division 2, Group C&D and Zone 2
Cooling System
Jacket water thermostats and housing — full open temperature 98°C (208°F)
Jacket water pump — gear driven, centrifugal, non-self-priming
Aftercooler water pump — gear driven, centrifugal, non-self-priming
Aftercooler core — for treated water and sea air atmosphere
Exhaust System
Exhaust manifolds — watercooled
Exhaust elbow — dry 203 mm (8 in)
Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
Flywheels & Flywheel Housings
Flywheel, SAE No. 14 or 18
Flywheel housing, SAE No. 0
SAE standard rotation
Fuel System
Air/fuel ratio control
Gas pressure regulator
Natural gas carburetor
Lube System
Crankcase breather — top mounted
Oil cooler
Oil filter — RH
Oil filler in valve cover, dipstick — RH
Mounting System
Engine mounting rails — 254 mm (10 in) industrialtype, entire length
Protection System
ADEM A4 protection
The following include alarm and shutdown:
The following is display only
General
Paint, Caterpillar yellow
Crankshaft vibration damper and drive pulleys
Lifting eyes
Cylinder block inspection covers
ALL
Air Inlet System
Air cleaner — single element with service indicator
Optional air inlet adapter and rain cap — recommended for weather protection
Control System
ADEM A4
Class 1, Division 2, Group C&D and Zone 2
Cooling System
Jacket water thermostats and housing — full open temperature 98°C (208°F)
Jacket water pump — gear driven, centrifugal, non-self-priming
Aftercooler water pump — gear driven, centrifugal, non-self-priming
Aftercooler core — for treated water and sea air atmosphere
Exhaust System
Exhaust manifolds — watercooled
Exhaust elbow — dry 203 mm (8 in)
Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options
Flywheels & Flywheel Housings
Flywheel, SAE No. 14 or 18
Flywheel housing, SAE No. 0
SAE standard rotation
Fuel System
Air/fuel ratio control
Gas pressure regulator
Natural gas carburetor
Lube System
Crankcase breather — top mounted
Oil cooler
Oil filter — RH
Oil filler in valve cover, dipstick — RH
Mounting System
Engine mounting rails — 254 mm (10 in) industrialtype, entire length
Protection System
ADEM A4 protection
The following include alarm and shutdown:
The following is display only
General
Paint, Caterpillar yellow
Crankshaft vibration damper and drive pulleys
Lifting eyes
Cylinder block inspection covers
Optional Equipment
Charging Alternator
24V, 35A CSA alternator
Exhaust System
Exhaust flex fitting
Exhaust elbow
Exhaust flange — ANSI
Instrumentation
Operator interface panel
Operator interface panel enclosure
15', 20', 50' interconnect harness
Starting System
Air pressure regulator
Air start silencer
Vane starter
Electric starter
Turbine starter
Fuel System
Fuel filter
Air Inlet System
Precleaner
Rain cap