-
Specifications
-
Standard/Optional Equipment
- Catalog
Standby Rating
4000 (no fan)/3900/3620(no fan)/3500 ekW
Prime Power Rating
3600 (no fan)/3500/3300 (no fan)/3180 ekW
Emissions/Fuel Strategy
Low Fuel, Tier 2
Voltage
480 to 13800 Volts
Frequency
60 Hz
Speed
1800 rpm
Duty Cycle
Standby, Mission Critical, Prime, Continuous
Maximum Rating
4000 ekW
Minimum Rating
3150 ekW
Engine Model
C175-20 SCAC, V-20, 4-Stroke Water-Cooled Diesel
Bore
6.89in
Stroke
8.66in
Displacement
6456.31in³
Compression Ratio
15.3:1
Aspiration
Turbo Aftercooled
Fuel System
Common Rail
Governor Type
ADEM� A4
Length - Minimum
262.5in
Length - Maximum
331.1in
Width - Minimum
92in
Width - Maximum
128.5in
Height - Minimum
99.8in
Height - Maximum
150.7in
Dry Weight - Genset (minimum)
55100lb
Dry Weight - Genset (maximum)
66200lb
Air Inlet Systems
Single element air cleaner
Control Panel
EMCP 4.4
Controller and MV and HV power connection locations
Controller voltage and current sensing groups
E-Stop
Generator harness
Generator temperature monitoring
Interconnect harness
Load share module
Modbus monitoring of packages
Speed adjust
Vandal proof panel door
Annunciator modules
Customer interface options
Cooling System
Fuel cooler
Package mounted radiators
Remote radiators
Crankcase Systems
Crankcase ventilation system
Explosive relief valves
Exhaust System
Exhaust collectors/manifold
Front housing - Prime or continuous
Front housing - Standby or mission critical
Mufflers (15, 25 and 34 dBA silencers)
Fuel System
Primary fuel filter
Generator
Anti-condensation heater
Internal excitation (IE)
Oversize and premium generators
Permanent magnet excitation (PMG)
Generators and Attachments
Differential current transformers
Generator air cleaner
Medium voltage - 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
Thermostat for space heater
Instrumentation
Pyrometer and thermocouples
Lube System
Drain group oil pans
Electric prelube pumps
Lube oil heater
Lubricating oil
Oil filters
Mounting System
IBC vibration isolators - Shipped loose
Rubber anti-vibration mounts
Spring type linear vibration isolators
Power Termination
Circuit breakers, IEC compliant
Circuit breakers, UL listed
Special Tests / Reports
Custom generator TVA report
Generator test report
Genset fuel consumption test
PGS Test report @ 0.8 power factor
PGS Test report @ 1.0 power factor
Special test charge - Engine only
Standard engine test charge
Standard genset TVA (Torsional Vibration Analysis) report
Starting / Charging System
20 Amp Battery chargers
24 Volt battery set - Dry
24 Volt electric starting motor
35 Amp Battery chargers
50 Amp Battery chargers
Air pressure regulator
Air starting motor
Charging alternators - Dry
Jacket water heaters
Starter location covers
General
Barring groups:
Control GP - air powered bar group
Engine air powered
Engine barring group
Manual
Special paint - 3500
Air Inlet System
4 x Single element air cleaner canisters with service indicator(s).
Control Panel
24 Volt DC operation
4 Programmable relay Inputs
4 Programmable relay output
Alarm acknowledge
Amps (per phase & average)
Auto/start/stop control
Coolant temperature
DC volts
Digital indicators
Cat ECS 100
Emergency stop
Emergency stop pushbutton
Engine cool-down timer
Engine cycle crank
Environmental sealed front face
Failure to start (overcrank)
Frequency (Hz)
High Coolant temperature
Lamp test
Low coolant level
Low oil pressure
Oil pressure (psi, kPa or bar)
Operating hours
Overspeed
RPM
Speed adjust
Text alarm/event descriptions.
True RMS AC metering, 3-phase, +/-2% accuracy
Volts (L-L & L-N)
Wall mounted controls:
Warning/shutdown Indicators:
Cooling System
AC Inlet: 6" ANSI / AC Outlet: 3-1/2" ANSI
Coolant sensors
JW Inlet: 6" ANSI / JW Outlet: 5" Cat Flange
SCAC cooling
Exhaust System
Dry exhaust manifold
Dual ANSI 18" / DIN 450 flanges. Shipped loose. Support required from installation
Fuel System
10 Micron spin on yype
4 Micron spin on type
Engine mounted filters x 3
Filters x 3
Primary fuel filter water/fuel water separator
Secondary/tertiary fuel filters
Generators and attachments
3 Phase brushless
3 Phase voltage sensing
6 Leads
Anti-condensation space heater
Class H temperature rise at 40C ambient
Exciter diode monitor
Form wound
IEC platinum stator RTDs
Min / max exciter limiter
NEMA Class H insulation
Permanent magnet excitation (PMG)
Reactive droop capability
RFI suppression
Right side extension box, bottom cable entry
Salient pole
Voltage regulator
Governing System
ADEM A4
Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
Lube System
Fumes disposal
Gear type lube oil pump
Integral lube Oil cooler
Lubricating oil
Oil drain lines and valve
Oil filter, filler and dipstick
Mounting Systems
Rails - Engine/generator
Rubber anti-vibration mounts - shipped loose
Starting / Charging System
Batteries and battery rack w/cables
Battery disconnect switch
Dual 24 volt electric starting motors
General
Paint - Caterpillar yellow with high gloss black rails
Right hand servicing
SAE standard rotation
ALL
Air Inlet System
4 x Single element air cleaner canisters with service indicator(s).
Control Panel
24 Volt DC operation
4 Programmable relay Inputs
4 Programmable relay output
Alarm acknowledge
Amps (per phase & average)
Auto/start/stop control
Coolant temperature
DC volts
Digital indicators
Cat ECS 100
Emergency stop
Emergency stop pushbutton
Engine cool-down timer
Engine cycle crank
Environmental sealed front face
Failure to start (overcrank)
Frequency (Hz)
High Coolant temperature
Lamp test
Low coolant level
Low oil pressure
Oil pressure (psi, kPa or bar)
Operating hours
Overspeed
RPM
Speed adjust
Text alarm/event descriptions.
True RMS AC metering, 3-phase, +/-2% accuracy
Volts (L-L & L-N)
Wall mounted controls:
Warning/shutdown Indicators:
Cooling System
AC Inlet: 6" ANSI / AC Outlet: 3-1/2" ANSI
Coolant sensors
JW Inlet: 6" ANSI / JW Outlet: 5" Cat Flange
SCAC cooling
Exhaust System
Dry exhaust manifold
Dual ANSI 18" / DIN 450 flanges. Shipped loose. Support required from installation
Fuel System
10 Micron spin on yype
4 Micron spin on type
Engine mounted filters x 3
Filters x 3
Primary fuel filter water/fuel water separator
Secondary/tertiary fuel filters
Generators and attachments
3 Phase brushless
3 Phase voltage sensing
6 Leads
Anti-condensation space heater
Class H temperature rise at 40C ambient
Exciter diode monitor
Form wound
IEC platinum stator RTDs
Min / max exciter limiter
NEMA Class H insulation
Permanent magnet excitation (PMG)
Reactive droop capability
RFI suppression
Right side extension box, bottom cable entry
Salient pole
Voltage regulator
Governing System
ADEM A4
Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
Lube System
Fumes disposal
Gear type lube oil pump
Integral lube Oil cooler
Lubricating oil
Oil drain lines and valve
Oil filter, filler and dipstick
Mounting Systems
Rails - Engine/generator
Rubber anti-vibration mounts - shipped loose
Starting / Charging System
Batteries and battery rack w/cables
Battery disconnect switch
Dual 24 volt electric starting motors
General
Paint - Caterpillar yellow with high gloss black rails
Right hand servicing
SAE standard rotation
Optional Equipment
Air Inlet Systems
Single element air cleaner
Control Panel
EMCP 4.4
Controller and MV and HV power connection locations
Controller voltage and current sensing groups
E-Stop
Generator harness
Generator temperature monitoring
Interconnect harness
Load share module
Modbus monitoring of packages
Speed adjust
Vandal proof panel door
Annunciator modules
Customer interface options
Cooling System
Fuel cooler
Package mounted radiators
Remote radiators
Crankcase Systems
Crankcase ventilation system
Explosive relief valves
Exhaust System
Exhaust collectors/manifold
Front housing - Prime or continuous
Front housing - Standby or mission critical
Mufflers (15, 25 and 34 dBA silencers)
Fuel System
Primary fuel filter
Generator
Anti-condensation heater
Internal excitation (IE)
Oversize and premium generators
Permanent magnet excitation (PMG)
Generators and Attachments
Differential current transformers
Generator air cleaner
Medium voltage - 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
Thermostat for space heater
Instrumentation
Pyrometer and thermocouples
Lube System
Drain group oil pans
Electric prelube pumps
Lube oil heater
Lubricating oil
Oil filters
Mounting System
IBC vibration isolators - Shipped loose
Rubber anti-vibration mounts
Spring type linear vibration isolators
Power Termination
Circuit breakers, IEC compliant
Circuit breakers, UL listed
Special Tests / Reports
Custom generator TVA report
Generator test report
Genset fuel consumption test
PGS Test report @ 0.8 power factor
PGS Test report @ 1.0 power factor
Special test charge - Engine only
Standard engine test charge
Standard genset TVA (Torsional Vibration Analysis) report
Starting / Charging System
20 Amp Battery chargers
24 Volt battery set - Dry
24 Volt electric starting motor
35 Amp Battery chargers
50 Amp Battery chargers
Air pressure regulator
Air starting motor
Charging alternators - Dry
Jacket water heaters
Starter location covers
General
Barring groups:
Control GP - air powered bar group
Engine air powered
Engine barring group
Manual
Special paint - 3500