402

C18 Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

  • Specifications

  • Standard/Optional Equipment

  • Catalog

Maximum Rating

600 ekW

Minimum Rating

455 ekW

Emissions/Fuel Strategy

U.S. EPA Cert., Tier 2

Voltage

208 to 600 Volts

Frequency

60 Hz

Speed

1800 rpm

Duty Cycle

Standby, Prime

Engine Model

C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore

5.71in

Stroke

7.2in

Displacement

1106.4l

Compression Ratio

14.5:1

Aspiration

Air to Air Aftercooled

Fuel System

Electronic unit injection

Governor Type

Adem™A4

Length - Maximum

5550in

Width - Maximum

80.9in

Height - Maximum

107.8in

Air Inlet System

Single element air cleaner

Dual element air cleaner

Exhaust

Industrial, residential, critical mufflers

Generator

Oversize and premium generators

Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Anti-condensation heater

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Circuit breakers

3 Pole (IEC-100% rated) Circuit breakers - Motorised

4 Pole (IEC-100% rated) Circuit breakers - Motorised

Shunt trip for IEC breaker

Power terminal strip

Circuit breaker (IEC) Auxiliary contacts

3 Pole (IEC-100% rated) Circuit breakers - Package mounted

Padlockable circuit breaker device

4 Pole (IEC-100% rated) Circuit breakers - Package mounted

Control Panels

Remote monitoring software

Load share module

Local & remote annunciator modules

GCCP 1.2, GCCP 1.5

Digital I/O module

Control System

Local alarm modules

Volt free contact

Local alarm horn

Remote annunciator module

Oil temperature displays

Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor

GCCP 1.5

Cooling System

Low coolant temperature alarm

Radiator duct flange

Enclosures

Sound attenuated enclosures

Starting/Charging

Jacket water heater

Battery chargers

Heavy duty starting system

Oversize batteries

Charging alternator

Exhaust System

8 and 10 inch GP flanges

8 and 10 inch elbow kits

Engine mounted muffler

10, 25 and 35 end in / end out mufflers

Manifold and turbocharger guards

Fuel System

Manual fuel transfer pump

Fuel transfer system

Integral - Dual wall fuel tank base

General

Sound attenuated, weather protective or high ambient weather protective enclosure

Integral & sub-base UL listed dual wall fuel tanks

CSA Certification

Automatic transfer switches (ATS)

The following options are based on regional and product configuration:

Single or dual wall sub-base fuel tanks

EU Certificate of Conformance (CE)

EEC Declaration of Conformity

UL 2200 package

Single or dual wall integral fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Narrow, wide or skid base

Enclosures: Sound attenuated, weather protective

Generator and Attachments

Space heaters

A Frame CIP generator

Permanent magnet excitation (PMG)

LC frame generator

A Frame oversize generator

Ingress protection

LC frame CIP generator

LC frame oversize generators

Lube System

Manual sump pump

Starting and Charging

Battery disconnect switch

Jacket water heaters

5 Amp Battery charger

Air Inlet

Air cleaner

Air Inlet System

Turbocharger

Light duty air cleaner

Aftercooler core

Cooling

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Coolant drain line with valve

Radiator and cooling fan with guard

Package mounted radiator

Exhaust

Exhaust flange outlet

Exhaust System

Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

Standard 8 hour open set fuel tank

Fuel

Secondary fuel filters

Fuel priming pump

Primary fuel filter with integral water separator

Generator and Attachments

Matched to the performance and output characteristics of Cat engines

Segregated low voltage (AC/DC) wiring panel

Power center, IP22

A Frame generator - IP21 protection

Integrated voltage regulator (IVR)

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

Integrated voltage regulator (IVR)

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Power Termination

Busbar

Control System

GCCP 1.2

Governing System

Cat electronic governor (ADEM A4)

Control Panel

EMCP 4 Genset controller

Lube System

Lubricating oil

Oil drain valves

Mounting System

Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines

Mounting

Rubber vibration isolators

Starting/Charging

24 Volt battery with rack and cables

24 volt starting motor

Batteries

General

Engine and alternator pre-paint, Caterpillar yellow

Paint - Caterpillar yellow except rails and radiators gloss black

ALL

Air Inlet

Air cleaner

Air Inlet System

Turbocharger

Light duty air cleaner

Aftercooler core

Cooling

Caterpillar extended life coolant

Fan drive, battery charging alternator drive

Coolant drain line with valve

Radiator and cooling fan with guard

Package mounted radiator

Exhaust

Exhaust flange outlet

Exhaust System

Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

Standard 8 hour open set fuel tank

Fuel

Secondary fuel filters

Fuel priming pump

Primary fuel filter with integral water separator

Generator and Attachments

Matched to the performance and output characteristics of Cat engines

Segregated low voltage (AC/DC) wiring panel

Power center, IP22

A Frame generator - IP21 protection

Integrated voltage regulator (IVR)

Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre

Integrated voltage regulator (IVR)

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Power Termination

Busbar

Control System

GCCP 1.2

Governing System

Cat electronic governor (ADEM A4)

Control Panel

EMCP 4 Genset controller

Lube System

Lubricating oil

Oil drain valves

Mounting System

Captive linear vibration isolators between base and engine-generator. includes lifting provisions and termination points for coolant and lube oil drain lines

Mounting

Rubber vibration isolators

Starting/Charging

24 Volt battery with rack and cables

24 volt starting motor

Batteries

General

Engine and alternator pre-paint, Caterpillar yellow

Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment

Air Inlet System

Single element air cleaner

Dual element air cleaner

Exhaust

Industrial, residential, critical mufflers

Generator

Oversize and premium generators

Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)

Anti-condensation heater

Power Termination

Circuit breakers, UL listed

Circuit breakers, IEC compliant

Circuit breakers

3 Pole (IEC-100% rated) Circuit breakers - Motorised

4 Pole (IEC-100% rated) Circuit breakers - Motorised

Shunt trip for IEC breaker

Power terminal strip

Circuit breaker (IEC) Auxiliary contacts

3 Pole (IEC-100% rated) Circuit breakers - Package mounted

Padlockable circuit breaker device

4 Pole (IEC-100% rated) Circuit breakers - Package mounted

Control Panels

Remote monitoring software

Load share module

Local & remote annunciator modules

GCCP 1.2, GCCP 1.5

Digital I/O module

Control System

Local alarm modules

Volt free contact

Local alarm horn

Remote annunciator module

Oil temperature displays

Protective devices: Earth fault relay - earth leageage Ground fault relay - Overload shutdown via breaker - Low fuel level alarm - Low fuel level shutdown - High fuel level alarm - Fuel level sensor

GCCP 1.5

Cooling System

Low coolant temperature alarm

Radiator duct flange

Enclosures

Sound attenuated enclosures

Starting/Charging

Jacket water heater

Battery chargers

Heavy duty starting system

Oversize batteries

Charging alternator

Exhaust System

8 and 10 inch GP flanges

8 and 10 inch elbow kits

Engine mounted muffler

10, 25 and 35 end in / end out mufflers

Manifold and turbocharger guards

Fuel System

Manual fuel transfer pump

Fuel transfer system

Integral - Dual wall fuel tank base

General

Sound attenuated, weather protective or high ambient weather protective enclosure

Integral & sub-base UL listed dual wall fuel tanks

CSA Certification

Automatic transfer switches (ATS)

The following options are based on regional and product configuration:

Single or dual wall sub-base fuel tanks

EU Certificate of Conformance (CE)

EEC Declaration of Conformity

UL 2200 package

Single or dual wall integral fuel tanks

Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007

Narrow, wide or skid base

Enclosures: Sound attenuated, weather protective

Generator and Attachments

Space heaters

A Frame CIP generator

Permanent magnet excitation (PMG)

LC frame generator

A Frame oversize generator

Ingress protection

LC frame CIP generator

LC frame oversize generators

Lube System

Manual sump pump

Starting and Charging

Battery disconnect switch

Jacket water heaters

5 Amp Battery charger

    Send an Enquiry