ALL

Certificates

IBC seismic and wind Certifications

Air Inlet System

Air cleaner

Cartridge type air filter

Circuit breakers

Breakers (100% UL rated)

3-Pole 100% rated

Second circuit breaker box

Power terminal strip

Charging System

NFPA battery charger UL10A 120VAC

Control Panel

GCCP 1.2 Control panel

Exhaust System

Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

Standard open set fuel tank/base supplied base, formed steel with single wall integral 24-hour fuel tank

Control Panels

WSS1 Low coolant level shut down

FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected

NFPA110 bundle includes:

WCA1 Low coolant temperature alarm

A Coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application

PBC10NU NFPA battery charger

Oil temperature gauge and sender

PAA1 Panel mounted audible alarm

Ground fault relay

Remote E-stop button

Remote annunciator module

Audible alarm

Volt free contacts genset run and common alarm

Discrete I/O module

Overload shutdown via breaker

Low coolant temperature alarm

Protective devices:

Fuel level reading

Low coolant level shutdown

Cooling System

Coolant drain line with valve

Fan drive, battery charging alternator drive

Caterpillar extended life coolant

Radiator and cooling fan with guards

Radiator stone guard

Generator

12 Leads

Governing System

Mechanical and electrical governing system - model dependent

Lube System

Oil drain line with valve

Lubricating oil

General

Engine and alternator pre-paint, Caterpillar yellow

Starting/Charging System

Batteries

24V battery with rack and cables

Optional Equipment

Certificates

IBC seismic and wind Certifications

Alternator System

R Frame auxilliary winding

Air Inlet System

Cartridge type air filter

Charging System

NFPA battery charger UL10A 120VAC

Circuit breakers

Breakers (100% UL rated)

3-Pole 100% rated

Second circuit breaker box

Power terminal strip

Control Panels

NFPA110 bundle includes: FSS Low fuel level alarm & indication panel circuitry required when sub-base tank is selected - WSS1 Low coolant level shut down - WCA1 Low coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA battery charger - A Coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application

Ground fault relay

Remote E-stop button

Volt free contacts genset run and common alarm

Oil temperature gauge and sender

Audible alarm

Remote annunciator module

Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker

Discrete I/O module

Cooling System

Radiator transition flange

Enclosures

Sound attenuated enclosure, Level 1

External emergency stop

Sound attenuated Level 2 Enclosure (White)

Panel viewing window

Exhaust System

10, 25 and 35 dBA silencer systems

Overhead silencer mounting kit

Fuel System

Emergency vent pipe

Tank riser

5 Gallon spill containment

209 and 394 gallon sub-base fuel tanks

5 Gallon fill containment

Heating Elements

Battery heater

Jacket water heater

Coolant heater

Anti-condensation heater

Wiring for canopy space heater

Lube oil sump heater

Generators

Permanent magnet excitation (PMG) generator

Cat Alternator

Mounting System

Seismic vibration isolators

Tests

4 Hour factory test

Generator test report

PGS Test report @ 0.8 power factor

PGS Test report @ 1.0 power factor