-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
300 ekW
Minimum Rating
300 ekW
Emissions/Fuel Strategy
EPA Stationary Emergency
Voltage
208 to 600 Volts
Frequency
60 Hz
Speed
1800 rpm
Duty Cycle
Standby
Engine Model
Cat® C9 In-line 6, 4-cycle diesel
Bore
4.4in
Stroke
5.9in
Displacement
538in³
Compression Ratio
16.3:1
Aspiration
Turbocharged Air-to-Air Aftercooled
Fuel System
HEUI
Governor Type
Adem™A4
Length - Maximum
155.5in
Width - Minimum
56.3in
Width - Maximum
56.7in
Height - Minimum
67.2in
Height - Maximum
86.7in
Dry Weight - Genset (minimum)
5518.2lb
Dry Weight - Genset (maximum)
6929.1lb
Air Inlet System
Air cleaner (Non canister disposable)
Bases, Mounting & Fuel Tanks
Integral tank base, 24 hours, UL142
Audio & visual fuel alarm (@90% fuel level)
Wide Base - Skid
Fuel tank pill pipe & lockable cap
Circuit breaker
400A LSI
600A LSI
1200A LSI
800A LS/I
Auxiliary contacts
600A LS/I
1200A LS/I
400A LS/I
800A LSI
Control System
Audible alarm Gp
16 -light NFPA 99/110 Annunciator
Twist release, Red button emergency stop
Ground fault relay
100A Load center
Product link remote monitoring hardware
20A GFCI (Ground Fault Circuit Interrupter)
Volt free contacts
Enclosures
Sound attenuated Level 2 enclosure (White)
AC & DC Source lights
E-Stop
Exhaust System
6" Muffler - 25 dBA attenuation
Manifold and turbocharger guards
Flexible exhaust connection
Generator
Space heater
Permanent magnet excitation (PMG) generator
Starting System
Battery charger (UL Certified)
Jacket water heater
Standard battery set: 1000 CCA, 90 amp/hr.
General
CSA Certification
Extended Service Coverage
UL2200 Certification
Generator test report
Air Inlet System
Aftercooler core
Turbocharger
Air cleaner - Non canister, disposable
Control Panel
GCCP 1.2
Cooling System
Jacket water pump, gear driven, centrifugal
Thermostats and housing
Coolant drain valve
Radiator sight gauge
Blower fan and fan drive with guards
Radiator, package mounted
Exhaust System
Exhaust manifold - dry
Fuel System
Integral tank base, 24 hours, UL142
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator and secondary filter, spin on
Generator Set
Complete system designed & built at ISO 9001:2000 certified facilities
All protective devices and control functions simulated and checked
Factory tested to design specifications at full load conditions
Generators and Generator Attachments
IP23 Protection
12 Leads
Insulation system, Class H
Standard winding protection for non-harsh environments with relative humidity ? 95%
Voltage regulator (single phase sensing)
Easy access to AVR and terminals
Terminal box, IP22 RHS facing, bottom cable entry
Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))
Governing System
Cat electronic governor (ADEM A4)
Lube System
Shallow oil pan
Oil cooler
Fumes disposal to front of radiator
Oil drain with valve
Oil filler and dipstick
Oil filter, spin on
Lubricating oil, CK-4 (10W-30)
Mounting System
Captive linear vibration isolators between base and engine-generator
Includes lifting provisions and termination points for coolant and lube oil drain lines
Protection
Safety shutoff - High water temperature
Safety shutoff - Low oil pressure
Safety shutoff - Overspeed
Starting/Charging System
24-volt electric starting motor
24V, 45 Amp Charging alternator
General
Lifting eyes
Vibration damper
Parts book
ALL
Air Inlet System
Aftercooler core
Turbocharger
Air cleaner - Non canister, disposable
Control Panel
GCCP 1.2
Cooling System
Jacket water pump, gear driven, centrifugal
Thermostats and housing
Coolant drain valve
Radiator sight gauge
Blower fan and fan drive with guards
Radiator, package mounted
Exhaust System
Exhaust manifold - dry
Fuel System
Integral tank base, 24 hours, UL142
Fuel priming pump
Engine fuel transfer pump
Primary fuel filter w/integral water separator and secondary filter, spin on
Generator Set
Complete system designed & built at ISO 9001:2000 certified facilities
All protective devices and control functions simulated and checked
Factory tested to design specifications at full load conditions
Generators and Generator Attachments
IP23 Protection
12 Leads
Insulation system, Class H
Standard winding protection for non-harsh environments with relative humidity ? 95%
Voltage regulator (single phase sensing)
Easy access to AVR and terminals
Terminal box, IP22 RHS facing, bottom cable entry
Brushless, self-excited 2/3 pitch (600V uses Internal excitation (IE))
Governing System
Cat electronic governor (ADEM A4)
Lube System
Shallow oil pan
Oil cooler
Fumes disposal to front of radiator
Oil drain with valve
Oil filler and dipstick
Oil filter, spin on
Lubricating oil, CK-4 (10W-30)
Mounting System
Captive linear vibration isolators between base and engine-generator
Includes lifting provisions and termination points for coolant and lube oil drain lines
Protection
Safety shutoff - High water temperature
Safety shutoff - Low oil pressure
Safety shutoff - Overspeed
Starting/Charging System
24-volt electric starting motor
24V, 45 Amp Charging alternator
General
Lifting eyes
Vibration damper
Parts book
Optional Equipment
Air Inlet System
Air cleaner (Non canister disposable)
Bases, Mounting & Fuel Tanks
Integral tank base, 24 hours, UL142
Audio & visual fuel alarm (@90% fuel level)
Wide Base - Skid
Fuel tank pill pipe & lockable cap
Circuit breaker
400A LSI
600A LSI
1200A LSI
800A LS/I
Auxiliary contacts
600A LS/I
1200A LS/I
400A LS/I
800A LSI
Control System
Audible alarm Gp
16 -light NFPA 99/110 Annunciator
Twist release, Red button emergency stop
Ground fault relay
100A Load center
Product link remote monitoring hardware
20A GFCI (Ground Fault Circuit Interrupter)
Volt free contacts
Enclosures
Sound attenuated Level 2 enclosure (White)
AC & DC Source lights
E-Stop
Exhaust System
6" Muffler - 25 dBA attenuation
Manifold and turbocharger guards
Flexible exhaust connection
Generator
Space heater
Permanent magnet excitation (PMG) generator
Starting System
Battery charger (UL Certified)
Jacket water heater
Standard battery set: 1000 CCA, 90 amp/hr.
General
CSA Certification
Extended Service Coverage
UL2200 Certification
Generator test report