ALL

Air Inlet System

Single element canister type with service indicator

Air cleaner

Cooling

Package mounted radiator

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Fuel priming pump

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy duty starting system

Charging alternator

Control Panel

Communications:

6 Programmable digital inputs

Programmable protective relaying functions:

Low oil pressure

Environmental sealed front face

Volts (L-L & L-N)

Emergency stop pushbutton

Serial annunciator module data link

Reverse power (kW) (32)

Engine cycle crank

Lamp test

Over/under frequency (81 o/u)

kW-hr (total)

Speed adjust

True RMS AC metering, 3-phase, +/-2% accuracy

Engine cool-down timer

Overcurrent (50/51)

Reverse reactive power (kVAr) (32RV)

kW (per phase, average & percent)

kVAr-hr (total)

Generator phase sequence

Oil pressure (psi, kPa or bar)

Low coolant temperature

Amps (per phase & average)

Generator mounted - rear facing

Over/under voltage (27/59)

Low coolant level

Accessory module data link

kVAr (per phase, average & percent)

Cat ECS controller includes:

Failure to start (overcrank)

2 Programmable relay outputs (Form C)

Cat ECS 100

Overspeed

2 Programmable digital outputs

DC volts

Frequency (Hz)

High coolant temperature

Warning/shutdown with common LED indication of shutdowns for:

Operating hours

4 Programmable relay outputs (Form A)

Coolant temperature

Power factor (per phase & average)

Digital indication for:

Panel lights

Text alarm/event descriptions

Controls:

24 Volt DC operation

Alarm acknowledge

Customer data link (Modbus RTU)

kVA (per phase, average & percent)

Cooling System

Caterpillar extended life coolant

Coolant drain line with valve

Coolant level sensors

JWAC

Radiator fan and fan drive

Fan and belt guards

Exhaust System

Dry exhaust manifold

Flanged faced outlet(s)

Fuel System

Secondary fuel filters

Flexible fuel lines - shipped loose

Fuel cooler; not included with packages without radiator

Fuel priming pump

Generators and Attachments

Form wound

3 Phase brushless, Salient pole

Class H insulation, Class F temperature rise at 40C ambient (105C prime/130C standby)

Winding temperature detectors

Permanent magnet excitation (PMG)

Anti-condensation space heater

Right side extension terminal box, busbar connections, top mounted, bottom cable entry

6 Lead

NEMA standard hole pattern

Governing System

ADEM III

Literature

Parts book

Operation & Maintenance Manual

Lube System

Integral lube Oil cooler

Fumes disposal

Oil drain lines and valve

Oil filter, filler and dipstick

Lubricating oil

Gear type lube oil pump

Mounting System

Rubber anti-vibration mounts - shipped loose

Rails - engine/generator/radiator mounting

Starting / Charging System

Battery disconnect switch

45 Amp Charging alternator

Battery and battery rack w/cables

24 Volt electric starting motor

General

Flywheel and flywheel housing-SAE No. 00

SAE standard rotation

Paint - Caterpillar yellow with high gloss black rails & radiator

Right hand servicing

Optional Equipment

Air Inlet System

Air inlet protection

Remote air inlet adapters

Dual element air cleaners

Heavy duty air cleaners

Circuit breakers

Busbar connections

P Frame breaker connections

R Frame breaker connections

Optional busbar power connections

Circuit breaker harnesses

Masterpact breaker connections

Cable entry options

2000, 2500, 3200, 4000 Amp, 4 Pole, IEC rated Circuit breakers

2000, 2500, 3200, 4000, 5000 Amp, 3 Pole, IEC rated Circuit breakers

1600, 2000, 2500, 3000, 4000, 5000 Amp, 3 Pole, UL-100% rated Circuit breakers

Power Termination

Circuit breakers, IEC compliant

Control Panel

Customer interface options

Mounting group - External box clips

EMCP 4.4

PC monitoring (Remote and local)

Ground

Load share module options

Annunciator modules

Auxiliary box

Language options

Remote speed adjust

Vandal proof panel door

Voltage raise/lower switch

Generator temperature monitoring

Cooling System

Expansion tanks

Optional Serpentine radiators

Water level switch gauges

Optional ATAAC radiators

Exhaust System

Flexible fittings

Elbows

Flanges and exhaust fittings

Flanges

Y Adapters

Mufflers

Fuel System

Duplex fuel filters

Primary fuel filters

Generators and attachments

Differential current transformers - 8.7 and 15 kV class

Alternator air cleaners

Instrumentation

Pyrometer and thermocouples

Lube System

Manual prelube pump

Lube oil in standard sump

Oil level regulator

Electric prelube pumps

Mounting System

Spring type vibration isolators

IBC Seismic vibration isolators NORAD

Puck style low efficiency lsolators

Power Connections

Neutral ground connections

2700 & 3000 Frame

Grounding groups

Special Tests / Reports

IBC Certifications

Generator set test report

Torsional vibration analysis

PGS Test report @ 1.0 power factor

PGS Test report @ 0.8 power factor

Standard engine test charge

Fuel consumption test

Generator set consumption test

Starting / Charging System

Starter cover

Electric starting motors

Air pressure regulator

24 Volt battery set - Dry

Jacket water heaters

Engine barring group

10, 20, 35 and 50 Amp Battery chargers

Air starting motors

General

Special paint colors

US aid emblem