ALL

Air Inlet System

Air cleaner

Single element canister type with service indicator

Control Panel

RPM

Engine cycle crank

Failure to start (overcrank)

Warning/shutdown with common LED indication of shutdowns for:

Speed adjust

True RMS AC metering, 3-phase, +/-2% accuracy

Accessory module data link

Overcurrent (50/51)

DC volts

Controls:

Generator phase sequence

Low oil pressure

2 Programmable digital outputs

Reverse power (kW) (32)

Low coolant level

Operating hours

Frequency (Hz)

kVAr-hr (total)

kVA (per phase, average & percent)

Lamp test

Over/under frequency (81 o/u)

6 programmable digital inputs

2 Programmable relay outputs (Form C)

24 Volt DC operation

Customer data link (Modbus RTU)

EMCP 4 Genset controller

Volts (L-L & L-N)

High coolant temperature

Alarm acknowledge

Oil pressure (psi, kPa or bar)

4 Programmable relay outputs (Form A)

Overspeed

EMCP4.2B controller includes:

Engine cool-down timer

Panel lights

kW (per phase, average & percent)

Low coolant temperature

Over/under voltage (27/59)

Serial annunciator module data link

Generator mounted - rear facing

Communications:

kVAr (per phase, average & percent)

Digital indication for:

Text alarm/event descriptions

EMCP 4.2B

Coolant temperature

Emergency stop pushbutton

Programmable protective relaying functions:

kW-hr (total)

Reverse reactive power (kVAr) (32RV)

Amps (per phase & average)

Environmental sealed front face

Power factor (per phase & average)

Exhaust

Exhaust flange outlet

Fuel

Primary fuel filter with integral water separator

Generator

IP23 Protection

Matched to the performance and output characteristics of Cat engines

Power Termination

Busbar

Starting/Charging

Heavy duty starting system

Charging alternator

Cooling System

Fan and belt guards

Coolant drain line with valve

JWAC

Caterpillar extended life coolant

Coolant level sensors

Radiator fan and fan drive

Cooling

Package mounted radiator

Exhaust System

Flanged faced outlet(s)

Dry exhaust manifold

Fuel System

Flexible fuel lines - shipped loose

Fuel priming pump

Fuel cooler; not included with packages without radiator

Secondary fuel filters

Generators and Attachments

NEMA Class H insulation system, Class H temperature rise at 40C ambient (125C prime / 150C standby).

Busbar connections, top center mounted, top cable entry

Random wound

6 Lead

Winding temperature detectors

IEC standard hole pattern

Internal excitation (IE)

3 phase brushless, Salient pole

Generator set packages include Caterpillar's digital voltage regulator (CDVR). CDVR includes reactive droop capability, 3-phase voltage sensing, KVAR/PF modes, RFI suppression, min/max exciter

Governing System

ADEM III

Literature

Parts book

Operation & Maintenance Manual

Lube System

Gear type lube oil pump

Integral lube Oil cooler

Fumes disposal

Lubricating oil

Oil filter, filler and dipstick

Oil drain lines and valve

Mounting System

Rails - Engine/generator/radiator mounting

Rubber anti-vibration mounts - shipped loose

Starting / Charging System

24 Volt electric starting motor

Battery and battery rack w/cables

Battery disconnect switch

General

Right hand servicing

Flywheel and flywheel housing-SAE No. 00

Paint - Caterpillar yellow with high gloss black rails & radiator

SAE standard rotation

Optional Equipment

Air Inlet System

Remote air inlet adapters

Dual element air cleaners

Air inlet protection

Heavy duty air cleaners

Circuit breakers

Cable entry options

Control packaging for enclosures

Trip units

Load take off; IEC standard hole

Busbar power connections

Center posts busbars

EMAX breakers

Power Termination

Circuit breakers, IEC compliant

Control Panels

Annunciator modules

Generator temperature monitoring

Auxiliary box

Remote speed adjust

Busbar connections

Vandal proof panel door

Voltage raise/lower switch

EMCP 4.3, EMCP 4.4

Local and remote monitoring

Language options

Customer interface options

External box clips

EMAX breaker connections

Governors

Cooling System

Heat exchangers

Water level switch gauges

Radiator duct flanges

Optional Serpentine radiators

European Certifications

EU Declaration of Conformity

Exhaust System

Through wall installation kit

Muffler mounting kits

Mufflers

Flexible fittings

Fuel System

Fuel coolers

Primary fuel filter

Generators and attachments

Generators

3 Phase, Random wound, Internal excitation (IE)

Internal excitation (IE)

3 Phase, 380 / 400 / 415 / 3300 / 6600 / 10000 / 10500 / 11000 volt<br />  

Number of leads: 6

Pitch: 0.6667

Instrumentation

Pyrometers and thermocouples

Thermocouples

Lube System

Oil level regulator

Electric prelube pumps

Manual prelube sump pumps

Mounting System

IBC vibration isolators

Spring type vibration isolators

Protection System

Explosion relief valves

Special Tests / Reports

IBC seismic Certification

CSA test and certification

PGS Test report @ 1.0 power factor

Neutral ground certificate

PGS Test report @ 0.8 power factor

Starting / Charging System

10 and 20 Amp Battery chargers

Charging alternators - 50 Amp

Dual 24 volt electric starting motors

ETHER starting aids

24 Volt battery set - Dry

Jacket water heaters

General

Engine barring group