-
Specifications
-
Standard/Optional Equipment
- Catalog
Maximum Rating
550 kVA
Minimum Rating
365 kVA
Emissions/Fuel Strategy
Tier 2 or Tier 3
Voltage
208 to 600 Volts
Frequency
50 Hz
Speed
1500 rpm
Duty Cycle
Standby, Prime
Engine Model
C15 ATAAC, I-6, 4-Stroke Water-Cooled Diesel
Bore
5.4in
Stroke
6.75in
Displacement
927.56in³
Compression Ratio
16.1:1
Aspiration
Air to Air Aftercooled
Fuel System
MEUI
Governor Type
Adem™A4
Length - Maximum
150.8in
Width - Maximum
58.3in
Height - Maximum
86.3in
Air Inlet System
Single element air cleaner
Dual element air cleaner
Exhaust
Industrial, residential, critical mufflers
Certifications
EU Certificate of Conformance (CE)
Global certification for CIS
Generator
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Anti-condensation heater
Power Termination
Circuit breakers, UL listed
Circuit breakers, IEC compliant
Circuit breakers
Shunt trip for IEC circuit breaker
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Auxiliary contacts, circuit breaker
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
3 Pole (IEC-100% rated) Circuit breakers - Motorised
Power terminal strip
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Padlockable circuit breaker device
Generator and Attachments
Permanent magnet excitation (PMG) generator
LC frame CIP generator
Oversize LC frame generator
Space heaters
CIP A Frame generator
Oversize A Frame generator
Ingress protection
A Frame generator - IP21 Protection
LC frame generator
Control Panels
Fuel level sensor
Volt free contacts
Oil temperature displays
Local annunciator
GCCP 1.4
Local alarm horn
Remote annunciator module
Starting/Charging
Oversize batteries
Battery chargers
Jacket water heater
Heavy duty starting system
Charging alternator
Cooling System
Low coolant temperature alarm
Stone guards
Radiator duct flange
General
Narrow, wide or skid base
Single or dual wall integral fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
The following options are based on regional and product configuration:
Automatic transfer switches (ATS)
Integral & sub-base UL listed dual wall fuel tanks
CSA Certification
EEC Declaration of Conformity
Single or dual wall sub-base fuel tanks
UL 2200 package
Sound attenuated, weather protective or high ambient weather protective enclosure
EU Certificate of Conformance (CE)
Enclosures
High ambient sound attenuated enclosures
Sound attenuated enclosures
Exhaust System
6 and 8 inch elbow kit
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Engine mounted muffler
6 and 8 inch flange GP
Flexible exhaust fittings
Fuel System
Fuel transfer system controls
Manual fuel transfer pump
Dual wall fuel tank base
Lube System
Manual sump pump
Mounting System
Narrow skid base - replaces standard fuel tank base
Special Test / Reports
PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
5 Amp single Battery charger
Jacket water heater
Battery disconnect switch
Air System
Turbocharger
Aftercooler core
Air cleaner - Non canister disposable paper filter
Air Inlet
Air cleaner
Control Panel
GCCP 1.3
Cooling
Package mounted radiator
Cooling System
Caterpillar extended life coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Exhaust
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank/base supplied
Fuel
Primary fuel filter with integral water separator
Secondary fuel filters
Fuel priming pump
Fuel System
Engine fuel transfer pump
Primary fuel filter w/integral water separator and secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
Busbar
Generator and Attachments
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC Frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated voltage regulator (IVR)
Power center, IP22
Mounting
Rubber vibration isolators
Governing System
Cat electronic governor (ADEM A4).
Lube System
Oil cooler
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/Charging
24 Volt battery with rack and cables
General
Engine and alternator pre paint, Caterpillar yellow
ALL
Air System
Turbocharger
Aftercooler core
Air cleaner - Non canister disposable paper filter
Air Inlet
Air cleaner
Control Panel
GCCP 1.3
Cooling
Package mounted radiator
Cooling System
Caterpillar extended life coolant
Radiator and cooling fan with guard
Fan drive, battery charging alternator drive
Coolant drain line with valve
Exhaust
Base, formed steel with single wall integral 8-hour fuel tank
Standard open set fuel tank/base supplied
Fuel
Primary fuel filter with integral water separator
Secondary fuel filters
Fuel priming pump
Fuel System
Engine fuel transfer pump
Primary fuel filter w/integral water separator and secondary filter
Fuel priming pump
Flexible fuel lines
Fuel cooler
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
Busbar
Generator and Attachments
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
Optional LC Frame generator - IP23 Protection
Segregated low voltage (AC/DC) wiring panel
Integrated voltage regulator (IVR)
Power center, IP22
Mounting
Rubber vibration isolators
Governing System
Cat electronic governor (ADEM A4).
Lube System
Oil cooler
Oil drain valves
Mounting System
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/Charging
24 Volt battery with rack and cables
General
Engine and alternator pre paint, Caterpillar yellow
Optional Equipment
Air Inlet System
Single element air cleaner
Dual element air cleaner
Exhaust
Industrial, residential, critical mufflers
Certifications
EU Certificate of Conformance (CE)
Global certification for CIS
Generator
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Oversize and premium generators
Anti-condensation heater
Power Termination
Circuit breakers, UL listed
Circuit breakers, IEC compliant
Circuit breakers
Shunt trip for IEC circuit breaker
4 Pole (IEC-100% rated) Circuit breakers - Package mounted
Auxiliary contacts, circuit breaker
3 Pole (IEC-100% rated) Circuit breakers - Package mounted
3 Pole (IEC-100% rated) Circuit breakers - Motorised
Power terminal strip
4 Pole (IEC-100% rated) Circuit breakers - Motorised
Padlockable circuit breaker device
Generator and Attachments
Permanent magnet excitation (PMG) generator
LC frame CIP generator
Oversize LC frame generator
Space heaters
CIP A Frame generator
Oversize A Frame generator
Ingress protection
A Frame generator - IP21 Protection
LC frame generator
Control Panels
Fuel level sensor
Volt free contacts
Oil temperature displays
Local annunciator
GCCP 1.4
Local alarm horn
Remote annunciator module
Starting/Charging
Oversize batteries
Battery chargers
Jacket water heater
Heavy duty starting system
Charging alternator
Cooling System
Low coolant temperature alarm
Stone guards
Radiator duct flange
General
Narrow, wide or skid base
Single or dual wall integral fuel tanks
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
The following options are based on regional and product configuration:
Automatic transfer switches (ATS)
Integral & sub-base UL listed dual wall fuel tanks
CSA Certification
EEC Declaration of Conformity
Single or dual wall sub-base fuel tanks
UL 2200 package
Sound attenuated, weather protective or high ambient weather protective enclosure
EU Certificate of Conformance (CE)
Enclosures
High ambient sound attenuated enclosures
Sound attenuated enclosures
Exhaust System
6 and 8 inch elbow kit
Manifold and turbocharger guards
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Engine mounted muffler
6 and 8 inch flange GP
Flexible exhaust fittings
Fuel System
Fuel transfer system controls
Manual fuel transfer pump
Dual wall fuel tank base
Lube System
Manual sump pump
Mounting System
Narrow skid base - replaces standard fuel tank base
Special Test / Reports
PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Starting / Charging System
5 Amp single Battery charger
Jacket water heater
Battery disconnect switch