-
Specifications
-
Standard/Optional Equipment
- Catalog
Frequency
60 Hz
Natural Gas Rating
250 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Displacement
864.7in³
Fuel System
Carbureter, Down Draft
Speed
1800 rpm
Aspiration
Turbocharged - Aftercooled
Compression Ratio
9.5:1
Bore
5.31in
Stroke
6.5in
Length
138.74in
Width
57.6in
Height
68.04in
Weight
6364lb
Starting/Charging
Battery heater
Battery charger – UL Listed 10 amp
Jacket water heater
Charging alternator
General
CSA Certification
Suitable for Use as Service Equipment (SUSE)
UL 2200 package
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
Generator
Shunt trip and auxiliary contact breaker
Anti-condensation heater
Thermal magnetic or electronic trip MCCBs
Oversize and premium generators
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater
Cooling
Factory-installed radiator
Closed coolant recovery system
50/50 Ethylene glycol antifreeze
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Low fuel pressure switch
Fuel pressure test po
Primary and secondary fuel shut-off
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Generator
Class H insulation material
Full load capacity alternator
Permanent magnet excitation
Full load capacity alternator
Permanent magnet excitation
Matched to the performance and output characteristics of Cat engines
Integrated Voltage Regulator
Class H insulation material
IP23 Protection
Exhaust
Exhaust outlet with 3” pipe
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Solenoid activated starter motor
Engine electrical system
Battery cables
Solenoid activated starter motor
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
12 volt starting motor
Batteries with rack and cables
ALL
Cooling
Factory-installed radiator
Closed coolant recovery system
50/50 Ethylene glycol antifreeze
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Low fuel pressure switch
Fuel pressure test po
Primary and secondary fuel shut-off
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Generator
Class H insulation material
Full load capacity alternator
Permanent magnet excitation
Full load capacity alternator
Permanent magnet excitation
Matched to the performance and output characteristics of Cat engines
Integrated Voltage Regulator
Class H insulation material
IP23 Protection
Exhaust
Exhaust outlet with 3” pipe
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Solenoid activated starter motor
Engine electrical system
Battery cables
Solenoid activated starter motor
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
12 volt starting motor
Batteries with rack and cables
Optional Equipment
Starting/Charging
Battery heater
Battery charger – UL Listed 10 amp
Jacket water heater
Charging alternator
General
CSA Certification
Suitable for Use as Service Equipment (SUSE)
UL 2200 package
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
Generator
Shunt trip and auxiliary contact breaker
Anti-condensation heater
Thermal magnetic or electronic trip MCCBs
Oversize and premium generators
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater