-
Specifications
-
Standard/Optional Equipment
- Catalog
Frequency
60 Hz
Natural Gas Rating
275 eKW
Emissions/Fuel Strategy
U.S. EPA Certified for Non-Emergency Application
Fuel System
Carburetor, Down Draft
Compression Ratio
9.5:1
Displacement
864.71in³
Speed
1800 rpm
Bore
5.31in
Stroke
6.5in
Length
136in
Width
57.6in
Height
66.1in
Weight
6274lb
Starting/Charging
Charging alternator
Jacket water heater
Battery heater
Battery charger – UL Listed 10 amp
General
Suitable for Use as Service Equipment (SUSE)
CSA Certification
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
UL 2200 package
Generator
Anti-condensation heater
Shunt trip and auxiliary contact breaker
Thermal magnetic or electronic trip MCCBs
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater
Oversize and premium generators
Cooling
Factory-installed radiator
50/50 Ethylene glycol antifreeze
Closed coolant recovery system
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Primary and secondary fuel shut-off
Low fuel pressure switch
Fuel pressure test po
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Generator
Class H insulation material
Permanent magnet excitation
Full load capacity alternator
Permanent magnet excitation
Integrated Voltage Regulator
Class H insulation material
Full load capacity alternator
IP23 Protection
Matched to the performance and output characteristics of Cat engines
Exhaust
Exhaust outlet with 3” pipe
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Solenoid activated starter motor
Engine electrical system
Battery cables
Solenoid activated starter motor
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
Batteries with rack and cables
12 volt starting motor
ALL
Cooling
Factory-installed radiator
50/50 Ethylene glycol antifreeze
Closed coolant recovery system
Standard ambient temperatures up to 50°C (122°F)
Radiator and cooling fan complete with protective guards
Air Inlet
Single element air filter
Fuel
Primary and secondary fuel shut-off
Low fuel pressure switch
Fuel pressure test po
Dual lock off valves
NPT connection
Natural Gas or LP Vapor
Generator
Class H insulation material
Permanent magnet excitation
Full load capacity alternator
Permanent magnet excitation
Integrated Voltage Regulator
Class H insulation material
Full load capacity alternator
IP23 Protection
Matched to the performance and output characteristics of Cat engines
Exhaust
Exhaust outlet with 3” pipe
Controls
EMCP 4.2 Series generator set controller
Mounting
Vibration isolaton (puck type)
Rubber vibration isolators
Electric Starting and/or Prelube
Solenoid activated starter motor
Engine electrical system
Battery cables
Solenoid activated starter motor
Electric Power - Package Serial Number Prefix
Battery charging alternator
Governor
Electronic governor (non adjustable)
Control Panel
EMCP 4.2 Series generator set controller
Starting/Charging
Batteries with rack and cables
12 volt starting motor
Optional Equipment
Starting/Charging
Charging alternator
Jacket water heater
Battery heater
Battery charger – UL Listed 10 amp
General
Suitable for Use as Service Equipment (SUSE)
CSA Certification
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
UL 2200 package
Generator
Anti-condensation heater
Shunt trip and auxiliary contact breaker
Thermal magnetic or electronic trip MCCBs
Excitation: [ ] Permanent Magnet Excited (PM)
Anti-condensation heater
Oversize and premium generators