406

AD45 Underground Articulated Truck

The Cat® AD45 Underground Truck delivers all the power, performance and reliability you expect from the AD45 — but the latest model also offers an an advanced EU Stage V compliant engine and aftertreatment solution that meets the strictest emissions standards, lowers your carbon footprint and improves air quality in your mine. In addition, a retrofit solution is available that allows you to retrofit the previous model, the AD45B, to meet the same strict standards. This ultra-clean diesel machine delivers superior productivity thanks to its ideal match with the next generation Cat R1700 underground loader and is technology-enhanced with features that improve productivity, boost uptime and keep operators and personnel safer on the job.

  • Specifications

  • Standard/Optional Equipment

  • 360° Tours

  • Catalog

Engine

Engine Model

Cat® C18

Engine Power - EU Stage V Engine - ISO 14396:2002

598hp

Engine Power - Tier 3 Engine - ISO 14396:2002

581hp

Engine Power - VR Engine - ISO 14396:2002

581hp

Bore

5.7in

Stroke

7.2in

Displacement

1104.53in³

Note (1)

Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.

Note (2)

All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F).

Note (3)

Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.

Note (4)

Optional Ventilation Reduction Package available.

Note (5)

Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.

Note (6)

Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (7)

*<5 %

Operating Specifications

Nominal Payload Capacity

99208lb

Gross Machine Mass

196765lb

Shipping Mass (Stage V Engine Model)

96225lb

Shipping Mass (Other Engine Models)

94415lb

Body Capacities

18.0-25.1 m³ (23.5-32.8 yd³)

Weights (Stage V Engine Model)

Operating Mass

91285lb

Operating Mass - Front Axle

64565lb

Operating Mass - Rear Axle

26720lb

Operating Mass + Rated Payload

190495lb

Operating Mass + Rated Payload - Front Axle

89235lb

Operating Mass + Rated Payload - Rear Axle

101260lb

Weights (Other Engine Models)

Operating Mass

88320lb

Operating Mass - Front Axle

61225lb

Operating Mass - Rear Axle

27095lb

Operating Mass + Rated Payload

187530lb

Operating Mass + Rated Payload - Front Axle

85355lb

Operating Mass + Rated Payload - Rear Axle

102175lb

Weight Distribution (Stage V Engine Model)

Empty - Front Axle

70.7%

Empty - Rear Axle

29.3%

Loaded - Front Axle

46.8%

Loaded - Rear Axle

53.2%

Weight Distribution (Other Engine Models)

Empty - Front Axle

69.3%

Empty - Rear Axle

30.7%

Loaded - Front Axle

45.5%

Loaded - Rear Axle

54.5%

Transmission

Forward - 1

4.4mile/h

Forward - 2

5.9mile/h

Forward - 3

8mile/h

Forward - 4

10.8mile/h

Forward - 5

14.6mile/h

Forward - 6

19.7mile/h

Forward - 7

26.4mile/h

Reverse - 1

4.2mile/h

Reverse - 2

5.6mile/h

Note

Maximum travel speeds with standard 29.5 × R29 tires.

Final Drives

Differential Ratio

3.46:1

Final Drive Ratio

5.65:1

Total Reduction Ratio

19.55:1

Body Hoist (Stage V Engine Model)

Raise

15 Seconds

Lower

21 Seconds

Total Cycle Time

36 Seconds

Body Hoist (Other Engine Models)

Raise

14 Seconds

Lower

21 Seconds

Total Cycle Time

35 Seconds

Turning Dimensions

Outside Clearance Radius*

371in

Inside Clearance Radius*

209in

Frame Oscillation

10°

Articulation Angle

42.5°

Note

*Clearance dimensions are for reference only.

Service Refill Capacities

Engine Crankcase - With Filter

16.9gal (US)

Transmission

15.9gal (US)

Hydraulic Tank

70.3gal (US)

Cooling System

22.5gal (US)

Front Differential and Final Drives

20.3gal (US)

Rear Differential and Final Drives

21.9gal (US)

Fuel Tank

201.8gal (US)

Tires

Tire Size

29.5 × R29

Standards

Standards

ROPS/FOPS Certified Cab

ELECTRICAL

12V power supply in cab

Alternator, 95-amp

Auxiliary start receptacle

Battery disconnect switch, ground level

Circuit breaker, 80-amp

Corrosive protection spray

Diagnostic connector

Electric starting, 24V

Engine shutdown switch, ground level
– Front left hand side

Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED

Low maintenance batteries

Reversing alarm

Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)

Electric horns

Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer

Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal

Low hydraulic level warning

Open operator station ROPS/FOPS structure

Operator presence system (auto park brake)

Rearview mirrors

Suspension seat Cat Comfort TLV2 with retractable seat belt

Trainer/passenger seat and seat belt

Tilt/telescopic steering wheel

Turn signal indicators

POWER TRAIN

Cat C18 ATAAC diesel engine, 6-cylinder

Automatic brake retarder control

Auto shift transmission 7 speed forward/2 speed reverse

Control throttle shifting

Engine air intake precleaner

Electric fuel priming pump

Exhaust, turbo compartment shielding

Four wheel drive

Long life coolant

Programmable ground speed limiting

Programmable gear block out with tray up

Radiator, cross flow; Radiator cap manual release

Secondary steering system

SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled

Torque converter, standard with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (21.3 m³, 27.9 yd³)

Catalytic exhaust purifier/muffler group

Centralized lubrication points

Decals, international picto graphics

Dual fuel tanks

Engine and transmission belly guards

Fenders, front, rear flaps

Fire wall

Fuel system manual shut off tap

Front axle suspension

Frame lifting lugs

Front and rear tow pin

Front rubber bumpers

Gauges, brake pressure

Hand hold (access on/off top deck)

Hitch, articulated and oscillated

Operation and Maintenance Manual – English and other applicable local languages to select

S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil

Swing out radiator grill

Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

ELECTRICAL

12V power supply in cab

Alternator, 95-amp

Auxiliary start receptacle

Battery disconnect switch, ground level

Circuit breaker, 80-amp

Corrosive protection spray

Diagnostic connector

Electric starting, 24V

Engine shutdown switch, ground level
– Front left hand side

Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED

Low maintenance batteries

Reversing alarm

Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)

Electric horns

Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer

Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal

Low hydraulic level warning

Open operator station ROPS/FOPS structure

Operator presence system (auto park brake)

Rearview mirrors

Suspension seat Cat Comfort TLV2 with retractable seat belt

Trainer/passenger seat and seat belt

Tilt/telescopic steering wheel

Turn signal indicators

POWER TRAIN

Cat C18 ATAAC diesel engine, 6-cylinder

Automatic brake retarder control

Auto shift transmission 7 speed forward/2 speed reverse

Control throttle shifting

Engine air intake precleaner

Electric fuel priming pump

Exhaust, turbo compartment shielding

Four wheel drive

Long life coolant

Programmable ground speed limiting

Programmable gear block out with tray up

Radiator, cross flow; Radiator cap manual release

Secondary steering system

SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled

Torque converter, standard with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (21.3 m³, 27.9 yd³)

Catalytic exhaust purifier/muffler group

Centralized lubrication points

Decals, international picto graphics

Dual fuel tanks

Engine and transmission belly guards

Fenders, front, rear flaps

Fire wall

Fuel system manual shut off tap

Front axle suspension

Frame lifting lugs

Front and rear tow pin

Front rubber bumpers

Gauges, brake pressure

Hand hold (access on/off top deck)

Hitch, articulated and oscillated

Operation and Maintenance Manual – English and other applicable local languages to select

S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil

Swing out radiator grill

Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

ELECTRICAL

12V power supply in cab

Alternator, 95-amp

Auxiliary start receptacle

Battery disconnect switch, ground level

Circuit breaker, 80-amp

Corrosive protection spray

Diagnostic connector

Electric starting, 24V

Engine shutdown switch, ground level
– Front left hand side

Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED

Low maintenance batteries

Reversing alarm

Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)

Electric horns

Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer

Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal

Low hydraulic level warning

Open operator station ROPS/FOPS structure

Operator presence system (auto park brake)

Rearview mirrors

Suspension seat Cat Comfort TLV2 with retractable seat belt

Trainer/passenger seat and seat belt

Tilt/telescopic steering wheel

Turn signal indicators

POWER TRAIN

Cat C18 ATAAC diesel engine, 6-cylinder

Automatic brake retarder control

Auto shift transmission 7 speed forward/2 speed reverse

Control throttle shifting

Engine air intake precleaner

Electric fuel priming pump

Exhaust, turbo compartment shielding

Four wheel drive

Long life coolant

Programmable ground speed limiting

Programmable gear block out with tray up

Radiator, cross flow; Radiator cap manual release

Secondary steering system

SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled

Torque converter, standard with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (21.3 m³, 27.9 yd³)

Catalytic exhaust purifier/muffler group

Centralized lubrication points

Decals, international picto graphics

Dual fuel tanks

Engine and transmission belly guards

Fenders, front, rear flaps

Fire wall

Fuel system manual shut off tap

Front axle suspension

Frame lifting lugs

Front and rear tow pin

Front rubber bumpers

Gauges, brake pressure

Hand hold (access on/off top deck)

Hitch, articulated and oscillated

Operation and Maintenance Manual – English and other applicable local languages to select

S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil

Swing out radiator grill

Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

ELECTRICAL

12V power supply in cab

Alternator, 95-amp

Auxiliary start receptacle

Battery disconnect switch, ground level

Circuit breaker, 80-amp

Corrosive protection spray

Diagnostic connector

Electric starting, 24V

Engine shutdown switch, ground level
– Front left hand side

Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED

Low maintenance batteries

Reversing alarm

Starting and charging system

OPERATOR ENVIRONMENT

Cat Electronic Monitoring System (Cat EMS)

Electric horns

Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer

Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal

Low hydraulic level warning

Open operator station ROPS/FOPS structure

Operator presence system (auto park brake)

Rearview mirrors

Suspension seat Cat Comfort TLV2 with retractable seat belt

Trainer/passenger seat and seat belt

Tilt/telescopic steering wheel

Turn signal indicators

POWER TRAIN

Cat C18 ATAAC diesel engine, 6-cylinder

Automatic brake retarder control

Auto shift transmission 7 speed forward/2 speed reverse

Control throttle shifting

Engine air intake precleaner

Electric fuel priming pump

Exhaust, turbo compartment shielding

Four wheel drive

Long life coolant

Programmable ground speed limiting

Programmable gear block out with tray up

Radiator, cross flow; Radiator cap manual release

Secondary steering system

SAFR™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled

Torque converter, standard with automatic lockup

OTHER STANDARD EQUIPMENT

Body, dump, (21.3 m³, 27.9 yd³)

Catalytic exhaust purifier/muffler group

Centralized lubrication points

Decals, international picto graphics

Dual fuel tanks

Engine and transmission belly guards

Fenders, front, rear flaps

Fire wall

Fuel system manual shut off tap

Front axle suspension

Frame lifting lugs

Front and rear tow pin

Front rubber bumpers

Gauges, brake pressure

Hand hold (access on/off top deck)

Hitch, articulated and oscillated

Operation and Maintenance Manual – English and other applicable local languages to select

S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil

Swing out radiator grill

Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

OPTIONAL EQUIPMENT

Battery shutdown<br>– Ground level isolation, in cab isolation switch<br>– Ground level isolation, engine shutdown switch<br>– Ground level isolation, in cab isolation, engine shutdown switch

Body dump<br>– Body (18.0 m³, 23.5 yd³)<br>– Body (25.1 m³, 32.8 yd³)

Body ejector<br>– Ejector (22.9 m³, 30.0 yd³)

Body liners, impact and/or wear<br>– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)<br>– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)<br>– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)<br>– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)

Body wear plate, external<br>– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)<br>– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)<br>– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)

Camera<br>– Color rear facing<br>– Color loading

Cover, anti vandalism for shipping

Engine options<br>– Engine, Stage V<br>– Engine, Ventilation Reduction (VR)<br>– Equivalent to Tier 3<br>– After-treatment options (for use with VR Engine only)

DPF (Flow Through) Filter

Fast fill system<br>– Coolant<br>– Engine oil<br>– Fuel (dual tanks)<br>– Hydraulic oil<br>– Transmission oil

Fire suppression system<br>– Ansul, wet

Fluids<br>– Arctic fuel<br>– Arctic coolant

Handrail Extension

Lubrication system<br>– Automatic, dump or ejector body<br>– Centralized, ejector body

Mine transfer<br>– Mine transfer ready front frame (tack welded)<br>– Mine transfer ready dump body (tack welded)<br>– Mine transfer ready ejector body (tack welded)

Operators station ROPS/FOPS enclosed<br>– Air conditioning<br>– Cab pressurizer and filter<br>– Dome light<br>– Heater<br>– Radio ready compartment for radio and speakers<br>– Sun visor<br>– Window, sliding cab door

Park brake switch engagement<br>– Push to apply<br>– Pull to apply

Payload<br>– Truck Payload Measurement System (TPMS)

Reflective tape

Rims<br>– Rim identification numbering<br>– Spare, tubeless

Seat<br>– Suspension seat Cat Comfort TLV2, vinyl<br>– Suspension seat tee, mechanical

Seat cover<br>– Tee and Cat Comfort TLV2<br>– Seat cover, companion

Service tools<br>– Collet jacking bolts, dump or ejector<br>– Diagnostics box<br>– Hoist cylinder supports (for body removal)<br>– Brake wear gauge<br>– Reference parts manual for additional tooling available

Switches<br>– Engine shutdown, fire suppression activation<br>– Idle timer<br>– Engine shutdown, fire suppression activation/idle timer

Technology<br>– Product Link Elite (PLE) system

Tire arrangements<br>– Tire, 29.5 × R29 VSNT Bridgestone<br>– Tire, 29.5 × R29 VSDL Bridgestone

Torque converter, high altitude, 3000 m (9,842 ft) and up

NOTE: Not all features are available in all regions. See your Cat dealer for more information.

360° Exterior Tour

360° Interior Tour

    Send an Enquiry