Dipper Payload

120t

Dipper Capacity

30.6-62.7 m3 (40-82 yd3)

Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)

120t

Note

Dependent on application and material density

Working Weight - With Dipper and Standard Links

3066000lb

Ballast - Furnished By Customer

667150lb

Note (1)

These weights will vary slightly depending upon dipper and optional equipment selection

Note (2)

All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads

38ft

Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard

36ft

Hoist

A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Ground Bearing Pressure - Note

Ground bearing pressure is dependent upon many factors

Upper Works Overall Width - Including Standard Walkways

41.9ft

Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads

46.6 m2 (298 kPa); 501.7 ft2 (43 psi)

Swing

Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.

Planetary Propel

Dual-motor independent drive

Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard

36 m2 (382 kPa); 386 ft2 (55 psi)

Type

Automatic, single-line system for open gear lubricant and grease

Components (1)

Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room

Components (2)

External FastFil from lower level

Power Requirements - Note

Other voltage options available to suit customer requirements

Drive

IGBT Acutrol drive system

Power Requirements - 50 Hz

6,000V, 6,600V, 7,200V, 11,000V

Power Requirements - Average Power Demand

945-1322 kW

Power Requirements - Voltage

3 phase, 50/60 Hz, 7,200V

Power Requirements - 60 Hz

7,200V, 13,800V

System Voltage - Nominal

50/60 Hz, 7,200V

Power Requirements - Peak power

3778 kW

Rope Data - Boom Suspension - No.

4

Rope Data - Boom Suspension - Diameter

3.25in

Type

One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.

Rope Data - Note

High impact ropes available as an option

Rope Data - Dipper Trip - No.

1

Rope Data - Hoist - No.

2

Rope Data - Hoist - Diameter

2.75in

Rope Data - Dipper Trip - Diameter

0.75in

Crowd (1)

HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.

Crowd (2)

(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Dipper Capacities

30.6-62.7 m3 (40-82 yd3)

Maximum Dumping Height

28.9ft

Dipper Payload

120ton (US)

Operating Weight

3066000lb

Cutting Radius - Maximum

80ft

Revolving Frame Tail Swing Radius

30.5ft

Cutting Height - Maximum

53.5ft

Radius of Level Floor

56.1ft

Dumping Height - With Clearance to Open Dipper Door

28.9ft

Note (1)

Optimal working ranges based on loading a Cat 795F AC truck.

Note (2)

*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.