-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
General
Engine Output - SAE J1995
1649hp
Bucket Payload
33ton (US)
Operating Weight
324ton (US)
Note
Specifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.
Diesel Engine - Highly Regulated
Gross Power - SAE J1995
1649hp
Net Power - ISO 9249
1625hp
Net Power - SAE J1349
1541hp
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
Diesel Engine - Lesser Regulated
Gross Power - SAE J1995
1531hp
Net Power - SAE J1349
1425hp
Net Power - ISO 9249
1511hp
Emissions
Meets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2
Diesel Engines
Number of Cylinders - Each Engine
12
Bore
5.42in
Stroke
6in
Displacement
1648in³
Aspiration
Turbocharged and air-to-air aftercooled
Components (1)
Hydraulically driven radiator fan with electronically controlled fan speed
Components (2)
Micro processed engine management
Components (3)
Heavy-duty air filters
Components (4)
Two-stage fuel filter, including water separator
Components (5)
Additional high-capacity water separator
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards
Fuel Tank Capacity
1342gal (US)
Electrical System - Diesel Drive
System Voltage
24V
Batteries in Series/Parallel Installation
4 x 210 Ah at 12V each; 420 Ah with 24V in total
Components (1)
Battery isolation relays
Components (2)
Emergency stop switches accessible from ground level and in engine module
Components (3)
14 LED high-brightness working flood lights
Components (4)
11 LED service lights
Operating Weights
6030 FS - Standard Track Pads
3.25ft
6030 FS - Operating Weight
657640lb
6030 FS - Ground Pressure
32.2psi
6030 - Standard Track Pads
3.25ft
6030 - Operating Weight
660060lb
6030 - Ground Pressure
32.3psi
Note
Other track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.
Hydraulic System with Pump Managing System
Hydraulic Tank Capacity - Approximately
707gal (US)
Total Volume of Hydraulic Oil - Approximately
925gal (US)
Main Pumps
4 x variable swash plate pumps
Main Pumps - Maximum Oil Flow - Diesel Version
4 x 552 L/min (4 x 146 gal/min)
Maximum Pressure - Attachment
4495psi
Maximum Pressure - Travel
5220psi
Swing Pumps
2 x reversible swash plate double pumps
Swing Pumps - Maximum Oil Flow - Diesel Version
4 x 197 L/min (4 x 52 gal/min)
Maximum Pressure - Swing Pumps
5076psi
Hydraulic Oil Cooling
Oil Flow of Cooling Pumps - Diesel Version
2 x 467 L/min (2 x 123 gal/min)
Diameter - Fan
48in
Swing System
Swing Drive
2 compact planetary transmissions with axial piston motors
Parking Brakes
Wet multiple-disc brake, spring-loaded/hydraulically released
Maximum Swing Speed - Diesel Version
4.6r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Maximum Swing Speed - AC Version
5r/min
Operator's Cab
Operator's Eye Level - Approximately
21.33ft
Internal Dimensions of Cab - Length
7.22ft
Internal Dimensions of Cab - Width
5.25ft
Internal Dimensions of Cab - Height
7.05ft
Components (1)
Under roof mounted heating ventilating and air conditioning system
Components (2)
External sun shields at side and rear windows
Components (3)
Robust instrument panel including large colored BCS screen with transflective technology
Components (4)
Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
Components (5)
Hydraulically operated 45 degree access stairway
Components (6)
Emergency egress ladder with ladder cage
Components (7)
Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
Components (8)
Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
Components (9)
Roller blinds at all windows
Components (10)
Windshield with parallel intermittent wiper/washer
Components (11)
All-round safety glass, armored windshield and sliding side window
Components (12)
Operator Protective Guards (ISO 10262:1998 Level II
Components (13)
Joystick controls integrated in independently adjustable seat consoles
Components (14)
Fold-away auxiliary seat with safety belt
Attachments
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
Constant boom momentum throughout the whole lift arc and crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
Wing shrouds on side walls and heel shrouds at bottom edges
Type (1)
Catwalks with rails at booms
Type (2)
Special wear packages for highly abrasive materials on request
Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (5)
Booms and sticks are stress-relieved after welding
Type (6)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
Bucket
Bucket Capacity - Face Shovel (heaped 2:1)
21.6yd³
Bucket Capacity - Backhoe (heaped 1:1)
22.2yd³
Digging Forces
Maximum Crowd Force
291700ft·lbf
Maximum Tearout Force
212150ft·lbf
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
2 x Cat C27 engines
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat CEM air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
24 V electric starter
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut - off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Continuous hydraulic oil filtration
Close loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Full-flow filters (10 μm), cooling return circuit
Pressure filters (40 μm and 6 μm), servo circuit
Transmission oil filters (40 μm)
Boom float values (FS and BH)
Stick float values (FS)
Electrical System
Four maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
14 LED high-brightness working flood lights
11 LED service lights
2 acoustic travel alarms -forward and reverse (counterweight, oil cooler)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1000 mm (3 ft 3 in) wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single HVAC system
Pneumatically cushioned and multiadjustable comfort seat with: -Seat heating -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
FM/AM radio with USB and AUX input
Fold-away auxiliary seat with 2-point safety belt
Sliding side window
Parallel intermittent wiper/washer
Roller blinds at all windows
External sun shields at side and rear windows
Cat Board Control system: -305 mm (12 in) color touchscreen -On-screen documentation in .pdf -On-screen troubleshooting assistance -On-screen graphic charts of logged data -Fault memory of related conditions -USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
45° stairway from engine bay to operator cab
Powered 45° access stairway
2 mirrors on LH side, 1 heated
Level indicators for length and crosswise inclination
Document storage
Front Attachment
Service access holes in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Hydraulic oil -Grease -Engine oil extension tanks
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Operator Protective Guard (Top Guard)
All-around safety glass
Armored windshield
Emergency egress ladder
Miscellaneous
ISO or ANSI decals
GENERAL
Export crating
Custom paint
SUPERSTRUCTURE
New C27 engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards.
Oil change interval extension for engine oil up to 1,000 hours
Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) square grease container)
Cold-weather package (400 V, 50 Hz or 208 V, 60 Hz)
CAB
Cab heating
Dual (redundancy) HVAC system
Camera monitoring system
Operator Protective Guard (Front Guard)
UNDERCARRIAGE
Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
Undercarriage guard (belly plate)
GENERAL
Export crating
Custom paint
SUPERSTRUCTURE
New C27 engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards.
Oil change interval extension for engine oil up to 1,000 hours
Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) square grease container)
Cold-weather package (400 V, 50 Hz or 208 V, 60 Hz)
CAB
Cab heating
Dual (redundancy) HVAC system
Camera monitoring system
Operator Protective Guard (Front Guard)
UNDERCARRIAGE
Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
Undercarriage guard (belly plate)
GENERAL
Export crating
Custom paint
SUPERSTRUCTURE
New C27 engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards.
Oil change interval extension for engine oil up to 1,000 hours
Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) square grease container)
Cold-weather package (400 V, 50 Hz or 208 V, 60 Hz)
CAB
Cab heating
Dual (redundancy) HVAC system
Camera monitoring system
Operator Protective Guard (Front Guard)
UNDERCARRIAGE
Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
Undercarriage guard (belly plate)
GENERAL
Export crating
Custom paint
SUPERSTRUCTURE
New C27 engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards.
Oil change interval extension for engine oil up to 1,000 hours
Round container for a standard 200 L (53 gal) grease barrel (instead of 450 L (119 gal) square grease container)
Cold-weather package (400 V, 50 Hz or 208 V, 60 Hz)
CAB
Cab heating
Dual (redundancy) HVAC system
Camera monitoring system
Operator Protective Guard (Front Guard)
UNDERCARRIAGE
Track pad width 800 mm (2 ft 7 in) or 1200 mm (3 ft 11 in)
Undercarriage guard (belly plate)