-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
General
Engine Output - SAE J1995
3015hp
Bucket Payload
67ton (US)
Operating Weight
660ton (US)
Note
Specifications shown above apply to Face Shovel configuration. Backhoe and Frontless configurations are also available.
Engine
Engine Model
2 x Cat 3512E
Diesel Engines
Rated Speed
1,800 min-1 (1,800 rpm)
Number of Cylinders - Each Engine
12
Bore
6.69in
Stroke
8.46in
Displacement
3574in³
Aspiration
Turbocharged and charge air-cooled
Components (1)
Non-DEF Aftertreatment system with Diesel Oxidation Catalysts (DOCs)
Components (2)
High-capacity water separator
Components (3)
Two-stage fuel filter with series filtration
Components (4)
Heavy-duty air filters
Components (5)
Microprocessed engine management
Components (6)
Hydraulically driven radiator fan with electronically controlled fan speed
Components (7)
Exhaust manifold and turbo heat shields
Diesel Engine - Lesser Regulated
Gross Power - SAE J1995
3025hp
Net Power - ISO 9249
2990hp
Net Power - SAE J1349
2821hp
Emissions
Optimized for fuel consumption.
Diesel Engine - Highly Regulated
Gross Power - SAE J1995
3015hp
Net Power - SAE J1349
2810hp
Net Power - ISO 9249
2979hp
Emissions
Meets U.S. EPA Tier 4 Final emission requirements. These engines participate in the U.S. EPA averaging, banking, and trading provisions.
Operating Weights
6060 FS - Standard Track Pads
4.58ft
6060 FS - Operating Weight
1320110lb
6060 FS - Ground Pressure
26.6 N/cm2 (38.5 psi)
Backhoe - Standard Track Pads
4.58ft
Backhoe - Operating Weight
1323860lb
Backhoe - Ground Pressure
26.7 N/cm2 (38.7 psi)
Note
Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, 100% fuel and lubricants.
Service Refill Capacities
Fuel Tank
3136gal (US)
Hydraulic Tank
1876gal (US)
Hydraulic System - Including Tank
2483gal (US)
Engine Oil
86.6gal (US)
Cooling System
211.4gal (US)
Swing Drive
42.4gal (US)
Grease Tank
188gal (US)
Hydraulic System with Pump Managing System
Main Pumps - Diesel Version
8 variable swash plate pumps
Main Pumps - Maximum Oil Flow - Diesel Version
8 x 650 L/min (8 x 172 gal/min)
Maximum Pressure - Attachment
4640psi
Maximum Pressure - Travel
5220psi
Swing Pumps - Diesel Version
4 reversible swash plate pumps
Swing Pumps - Maximum Oil Flow - Diesel Version
4 x 352 L/min (4 x 93 gal/min)
Maximum Pressure - Swing Pumps
5075psi
Hydraulic Oil Cooling
Oil Flow of Cooling Pumps
4 x 488 L/min (4 x 129 gal/min)
Components
4 cooling fans
Diameter - Fan
46in
Features (1)
Cooling system fully independent of all main circuits, i.e. controlled cooling capacity is available whenever engine is running
Features (2)
Fan speed and flow of oil to the coolers are thermostatically controlled
Features (3)
Extremely high cooling efficiency to ensure optimum oil temperature
Features (4)
Gear-type cooling pumps supplying high-volume, low-pressure oil to fans and aluminum coolers
Swing System
Swing Drive
4 compact planetary transmissions with axial piston motors
Parking Brakes
Wet multiple disc brake, spring loaded/hydraulically released
Maximum Swing Speed
3.8r/min
Swing Ring
Triple-race roller bearing with sealed internal gearing
Features (1)
Dirt wipers at swing ring to prevent build-up of debris between swing ring and carbody
Features (2)
Closed-loop swing circuit with torque control
Features (3)
Hydraulic braking of the swing motion by counteracting control
Features (4)
All raceways and the internal gearing of swing ring, supplied by automatic central lubrication system
Operator's Cab
Operator's Eye Level - Approximately
24.91ft
Internal Dimensions of Cab - Length
7.33ft
Internal Dimensions of Cab - Width
5.33ft
Internal Dimensions of Cab - Height
6.75ft
Components (1)
Single hydraulically driven HVAC System, with dual system option
Components (2)
In-floor window with removable grate
Components (3)
Pneumatically cushioned and multi-adjustable comfort seat with heating, cooling, and lumbar support
Components (4)
Independently adjustable seat consoles with integrated joysticks
Components (5)
Operator Protective Guard (Top Guard) (ISO 10262:1998)
Components (6)
Elevated full-size trainer seat with safety belt and laptop desk
Components (7)
Additional fold-away auxiliary seat with safety belt
Components (8)
Operator Presence switch
Components (9)
Monitoring system with 254 mm (10 in) touch screen
Components (10)
Powered 45 degree access stairway
Components (11)
Emergency egress ladder
Components (12)
FM/AM radio with USB and AUX input
Components (13)
Roller blinds on 3 front windows
Components (14)
3 cup holders
Components (15)
Cat Electronic Technician service port
Attachments
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)
Automatic roll-back limiter to prevent material spillage; Kinematic assistance to hydraulic forces
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)
Horizontal Automatic constant-angle bucket guidance; Vertical Automatic constant-angle bucket guidance
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)
Constant boom momentum throughout the entire lift arc; Crowd force assistance
All buckets (FS and BH) are equipped with a wear package consisting of: (1)
Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
All buckets (FS and BH) are equipped with a wear package consisting of: (2)
Wing shrouds on side walls and heel shrouds at bottom edges
Type (1)
Catwalks with rails at booms (FS and BH)
Type (2)
Guards for shovel cylinders (FS)
Type (3)
Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
Type (4)
Service access holes from both sides of boom (FS and BH) and stick (FS)
Type (5)
Welding procedures allow for internal counter-welding (double prep weld) wherever possible
Type (6)
Booms and sticks are stress-relieved after welding
Type (7)
Booms and sticks are torsion-resistant, welded box design of high-tensile steel with massive steel castings at pivot areas
Type (8)
Special wear packages for highly abrasive materials available upon request
Digging Forces
Maximum Crowd Force
494410lb
Maximum Breakout Force
388780lb
Working Ranges
Maximum Digging Height
51.17ft
Maximum Digging Reach
54.17ft
Maximum Digging Depth
9.17ft
Standard Bucket Capacity
Face Shovel (heaped 2:1)
44.5yd³
Backhoe (heaped 1:1)
44.5yd³
Backhoe Attachment (BH) - Digging Forces
Stick Digging Force - ISO
295740lb
Bucket Digging Force - ISO
274840lb
Backhoe Attachment (BH) - Working Range
Maximum Digging Height
52.83ft
Maximum Digging Reach
62.33ft
Maximum Digging Depth
29.17ft
Retractable Service Station
Installation
Retractable service station installed underneath the engine module and easily accessible from ground.
Equipped With (1)
Quick couplings for: Diesel fuel, Engine coolant - left/right engine, Pump transmission gear oil - left/right engine, Engine oil - left/right engine, Hydraulic oil tank, and grease container
Equipped With (2)
Cat jump-start socket
Equipped With (3)
Indicator lights
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
2 x Cat 3512E engines
Cat Powertrain
Aftertreatment System (used in highly regulated countries only): -Diesel Oxidation Catalysts (DOCs) -Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid -- automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Hydraulics
Hydraulic Optimization
Operator Assist: Enhanced Motion Control
Cat Hydraulic Hose assemblies
Pump managing system with: -Electronic load limit control -Flow on demand -Automatic zero flow regulation -Automatic engine rpm reduction -Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut-off for main pumps
Cooling of pump transmission gear oil
Closed loop swing circuit
Pressure testing points
Full-flow high-pressure filters (100 μm), main pumps
High pressure filters (100 μm), closed swing circuit
Full-flow filters (10 μm), return circuit
Pressure filters swing charge circuit (40 μm)
Pressure filters pilot circuit (6 μm)
Transmission oil filters (40 μm)
Boom float valve (FS and BH)
Stick float valve (FS)
Electrical System
6 Maintenance-free batteries
Lockable battery isolator switch
Lockable starter isolator switch
13 LED high-brightness working flood lights
17 LED service lights
2 acoustic travel alarms -forward and reverse (power module, oil cooler module)
2 electric horns (1 cab module, 1 oil cooler module)
Undercarriage
HD tracks with cast double-grouser track pads
1400 mm (4'7") wide track pads
HD fixed axle carrier and load rollers
HD fixed axle idlers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Automatic Lubrication System
Rectangular grease container (fill via service station)
Lubricated pinion in swing ring
Grease filters (200 μm)
Operator Environment
Single hydraulically driven HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: -Heating and cooling -Lumbar support -2-point safety belt -Head and arm rests -Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
FM/AM radio with USB and AUX input
Parallel intermittent wiper/washer
Roller blinds
Monitoring system with 254 mm (10 in) color touchscreen
45° stairway from engine bay to operator cab
Powered 45° access stairway
Heated mirror on LH side
Camera monitoring system (Right and rear cameras, 2 lights, and additional display)
Level indicators for length and crosswise inclination
Document Storage
Front Attachment
Service access holes from both sides in boom and stick (FS and BH)
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom (FS and BH)
Wear Package (as per bucket selection)
Cat Technology
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Service and Maintenance
Engine oil exchange interval -- 500 hours
Hydraulic oil change interval -10,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Retractable ground level service station with quick couplings for: -Diesel fuel -Engine coolant -left/right engines -Pump transmission gear oil -left/right engines -Engine oil -left/right engines -Engine oil extension tanks -Hydraulic oil -Grease -Swing transmission gear oil
Cat battery charging connector
Indicator lights
Cat Electronic Technician service port
Dirt wiper at swivel
Safety and Security
Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
Maintenance
ISO or ANSI decals
GENERAL
Custom paint
SUPERSTRUCTURE
Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours
Rectangular grease container, 710 L (188 gal), filled via service station
Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz
CAB
Dual hydraulically driven HVAC system for redundancy
Cab heating
Camera monitoring system with two cameras, two lights, and additional display
UNDERCARRIAGE
Track pad width 1400 mm (4 ft 7 in)
Belly plate for undercarriage protection
Additional optional equipment available on request.
GENERAL
Custom paint
SUPERSTRUCTURE
Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours
Rectangular grease container, 710 L (188 gal), filled via service station
Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz
CAB
Dual hydraulically driven HVAC system for redundancy
Cab heating
Camera monitoring system with two cameras, two lights, and additional display
UNDERCARRIAGE
Track pad width 1400 mm (4 ft 7 in)
Belly plate for undercarriage protection
Additional optional equipment available on request.
GENERAL
Custom paint
SUPERSTRUCTURE
Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours
Rectangular grease container, 710 L (188 gal), filled via service station
Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz
CAB
Dual hydraulically driven HVAC system for redundancy
Cab heating
Camera monitoring system with two cameras, two lights, and additional display
UNDERCARRIAGE
Track pad width 1400 mm (4 ft 7 in)
Belly plate for undercarriage protection
Additional optional equipment available on request.
GENERAL
Custom paint
SUPERSTRUCTURE
Oil change interval extension for engine oil up to 500 hours, with optional extension to 1,000 hours
Rectangular grease container, 710 L (188 gal), filled via service station
Various cold-weather options for temperatures below -10°; 400 V, 50 Hz and 208 V, 60 Hz
CAB
Dual hydraulically driven HVAC system for redundancy
Cab heating
Camera monitoring system with two cameras, two lights, and additional display
UNDERCARRIAGE
Track pad width 1400 mm (4 ft 7 in)
Belly plate for undercarriage protection
Additional optional equipment available on request.