406

6015 Hydraulic Shovel

The Cat® 6015 Hydraulic Shovel lets you move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With class-leading tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

  • Specifications

  • Standard/Optional Equipment

  • 360° Tours

  • Catalog

General

Engine Output - SAE J1995

824hp

Bucket Payload

16.1ton (US)

Operating Weight

154.3ton (US)

Note

Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.

Engine - U.S. EPA Tier 4 Final

Engine Model

Cat® C27

Gross Power - SAE J1995

824hp

Net Power - SAE J1349

746hp

Engine - Cat C27 with Tier 4 Final Emission Standards

Number of Cylinders

12

Bore

5.4in

Stroke

6in

Displacement

1648in³

Engine - Equivalent to U.S. EPA Tier 2

Engine Model

Cat® C27

Gross Power - SAE J1995

839hp

Net Power - SAE J1349

746hp

Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards

Number of Cylinders

12

Bore

5.4in

Stroke

6in

Displacement

1648in³

Aspiration

Turbocharged and air-to-air aftercooled

Engine

Emissions

U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1

Operating Weights - Backhoe

Operating Weight

154ton (US)

Weights

Ground Pressure

23.6psi

Note

Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants

Operating Weight

308000lb

Track

Standard

28in

Wide

36in

Extra Wide

39in

Number of Shoes - Each Side

46

Number of Track Rollers - Each Side

9

Number of Carrier Rollers - Each Side

3

Track Pads

Double grouser

Drive

Travel Speed - Two Stages - 1st Stage - Maximum

1.4mile/h

Travel Speed - Two Stages - 2nd Stage - Maximum

2.1mile/h

Maximum Drawbar Pull - Forward

192886lbf

Maximum Drawbar Pull - Reverse

220987lbf

Gradeability - Travel Drives

Approximately 42%

Hydraulic Track Tensioning

With accumulator

Maximum Drawbar Pull

179847lbf

Service Refill Capacities

Fuel Tank

449gal (US)

Cooling System

44gal (US)

Engine Oil

23gal (US)

Swing Drive

2.4gal (US)

Hydraulic System - Including Tank

463gal (US)

Hydraulic Tank

253gal (US)

Grease Tank

18gal (US)

Hydraulic System

Main Pumps

3 × variable swash plate pumps

Main Pumps - Maximum Total Oil Flow

407gal/min

Main Pumps - Maximum Pressure - Attachment

4641psi

Pilot Pump

1 × gear pump

Pilot Pump - Maximum Flow, Pilot

40.4gal/min

Pilot Pump - Maximum Pressure, Pilot

1378psi

Main Pumps - Maximum Pressure - Travel

4641psi

Swing Pump

1 × variable swash plate pump

Engine Fan Pump - Maximum Flow, Engine Fan

53.1gal/min

Engine Fan Pump - Maximum Pressure, Engine Fan

3191psi

Engine Fan Pump

1 × variable swash plate pump

Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan

22.7gal/min

Swing Pump - Maximum Flow - Swing

127gal/min

Hydraulic Fan Pump

1 × variable swash plate pump

Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan

1958psi

Swing Pump - Maximum Pressure - Swing

5294psi

Hydraulic Oil Cooling - Maximum Flow

284gal/min

Hydraulic Oil Cooling - Diameter of Fan

40in

Filters (1)

Full-flow high-pressure filters (200 μm) for main pumps

Filters (2)

Full-flow filters (20 μm) for complete return circuit

Filters (3)

Pressure filters (16 μm) for servo circuit

Filters (4)

Full-flow filters (6 μm) for engine cooling return circuit

Filters (5)

Swing charge filter (15 μm)

Filters (6)

Pump case return screens (125 μm)

Swing System

Swing Drive

Two (2) compact planetary transmissions with axial piston motors

Parking Brake

Wet multiple disc brake, spring-loaded/hydraulically released

Maximum Swing Speed

4.9r/min

Swing Ring

Cross roller bearing with sealed internal gearing

Features (1)

Closed-loop swing circuit with speed control

Features (2)

Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking

Features (3)

All raceways and the internal gearing of swing ring supplied by automatic central lubrication system

Centralized Service Area

Feature

Accessible from ground level

Equipped With (1)

Emergency stop

Equipped With (2)

Quick couplings for: Diesel fuel and Grease

Operator's Cab

Components (1)

Pressurized operator station with positive filtration

Components (2)

Heated cab mirror

Components (3)

Sliding upper door window (left-hand cab door)

Components (4)

Glass-breaking safety hammer

Components (5)

Removable lower windshield with in cab storage bracket

Components (6)

Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM

Components (7)

Beverage holder

Components (8)

Literature holder

Components (9)

AM/FM radio

Components (10)

Radio with MP3 auxiliary audio port

Components (11)

Two stereo speakers

Components (12)

Storage shelf suitable for lunch or toolbox

Components (13)

Color LCD display with warning, filter/fluid change, and working hour information

Components (14)

Adjustable armrest

Components (15)

Height-adjustable joystick consoles

Components (16)

Neutral lever (lock out) for all controls

Components (17)

Travel control pedals with removable hand levers

Components (18)

Two power outlets, 10 amp (total)

Components (19)

Laminated glass front upper window and tempered other windows

Attachments

Type (1)

Boom and stick torsion-resistant with welded box design

Type (2)

High-tensile steel with solid steel castings at pivot areas

Type (3)

Boom and stick stress-relieved after welding

Type (4)

Float valve for boom down function

Buckets Equipped With

– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds

Backhoe Attachment (BH) - Working Range

Maximum Digging Depth

26.3ft

Maximum Digging Reach

45.6ft

Maximum Digging Height

41.9ft

Maximum Dump Height

27.9ft

Backhoe Attachment (BH) - Digging Forces

Bucket Digging Force - ISO

120947lbf

Bucket Digging Force - SAE

112600lbf

Stick Digging Force - ISO

104761lbf

Stick Digging Force - SAE

98800lbf

Backhoe Attachment (BH) - Backhoe

Capacity 1:1

10.6yd³

Total Width

8.8ft

Number of Teeth

5

Tooth System

Cat C70 or M75

Weight - Including Standard Wear Package

18521lb

Maximum Material Density - Loose

3030lb/yd³

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

Cat Powertrain

2 x Cat 3512E engines

Aftertreatment System (used in highly regulated countries only): – Diesel Oxidation Catalysts (DOCs) – Non-DEF solution

Air-to-Air After Cooling (ATAAC)

Turbocharger

Hydraulically driven radiator fan

Electronically controlled fan speed

Micro processed engine management

Heavy-duty air filters

Two-stage fuel filter with series filtration

High-capacity water seperator

Starting aid -- automatic ether

Exhaust manifold and turbo heat shields

Dual 24 V electric starters per engine

Automatic engine idle shut down

Automatic fuel priming

Hydraulics

Hydraulic Optimization

Operator Assist: Enhanced Motion Control

Cat Hydraulic Hose assemblies

Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine rpm reduction – Reduced oil flow at high hydraulic oil or engine temperature

Pressure cut-off for main pumps

Cooling of pump transmission gear oil

Closed loop swing circuit

Pressure testing points

Full-flow high-pressure filters (100 μm), main pumps

High pressure filters (100 μm), closed swing circuit

Full-flow filters (10 μm), return circuit

Pressure filters swing charge circuit (40 μm)

Pressure filters pilot circuit (6 μm)

Transmission oil filters (40 μm)

Boom float valve (FS and BH)

Stick float valve (FS)

Electrical System

6 Maintenance-free batteries

Lockable battery isolator switch

Lockable starter isolator switch

13 LED high-brightness working flood lights

17 LED service lights

2 acoustic travel alarms – forward and reverse (power module, oil cooler module)

2 electric horns (1 cab module, 1 oil cooler module)

Undercarriage

HD tracks with cast double-grouser track pads

1400 mm (4'7") wide track pads

HD fixed axle carrier and load rollers

HD fixed axle idlers

Automatic hydraulic retarder valve

Hinged travel motor covers

Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas

Fully hydraulic self-adjusting track tensioning system with piston accumulators

Automatic Lubrication System

Rectangular grease container (fill via service station)

Lubricated pinion in swing ring

Grease filters (200 μm)

Operator Environment

Single hydraulically driven HVAC system

In-floor window with removable grate

Pneumatically cushioned and multiadjustable comfort seat with: – Heating and cooling – Lumbar support – 2-point safety belt – Head and arm rests – Safety switch for automatic motion shutdown

Independently adjustable seat consoles with integrated joysticks

Electronic-Hydraulic Servo Control

Elevated full-size trainer seat with 2-point safety belt and laptop desk

Additional fold-away auxiliary seat with 2-point safety belt

Three cup holders

FM/AM radio with USB and AUX input

Parallel intermittent wiper/washer

Roller blinds

Monitoring system with 254 mm (10 in) color touchscreen

45° stairway from engine bay to operator cab

Powered 45° access stairway

Heated mirror on LH side

Camera monitoring system (Right and rear cameras, 2 lights, and additional display)

Level indicators for length and crosswise inclination

Document Storage

Front Attachment

Service access holes from both sides in boom and stick (FS and BH)

Boom and stick thermally stress relieved after welding

Catwalks with rails at boom (FS and BH)

Wear Package (as per bucket selection)

Cat Technology

Cat Product Link™ Elite (Cellular)

Cat MineStar™ Solutions Ready

Service and Maintenance

Engine oil exchange interval -- 500 hours

Hydraulic oil change interval – 10,000 hours

Scheduled Oil Sampling (S·O·SSM) ports

Retractable ground level service station with quick couplings for: – Diesel fuel – Engine coolant – left/right engines – Pump transmission gear oil – left/right engines – Engine oil – left/right engines – Engine oil extension tanks – Hydraulic oil – Grease – Swing transmission gear oil

Cat battery charging connector

Indicator lights

Cat Electronic Technician service port

Dirt wiper at swivel

Safety and Security

Emergency stop switches: 2 in cab, 5 in engine module, 1 at ground level service station, 1 pull rope accessible from ground level

Operator Protective Guard (Top Guard)

All-round safety glass

Emergency egress ladder

Miscellaneous

ISO or ANSI decals

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

UNDERCARRIAGE

Track guards – full length

Track guards – center

Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather

120 V or 240 V cold weather package

Fuel heater

Heated cab mirror

Lubricant options include: low temperature, high temperature, and Cat Bio HYDO Advanced

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages

LED working lights

Powered 45° access stairway

Camera Monitoring System (2 cameras and additional color display)

CAB

Operator Protective Guard (Front Guard)

Product Link Elite radio options (Cellular, Satellite, No Radio)

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

360° Exterior Tour

360° Interior Tour

    Send an Enquiry