-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
Engine
Base Power (1st Gear) - Net
290hp
Engine Model
Cat® C13
Bore
5.1in
Stroke
6.2in
Speed at Rated Power
2,000 rpm
Derating Altitude - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
12176ft
Maximum Torque - ISO 9249 - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
1270lb/ft
Maximum Torque - ISO 9249 - Tier 4/Stage IV/Japan 2014 (Tier 4)
1306lb/ft
Maximum Torque - ISO 9249 - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
1270lb/ft
Emissions (2)
Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent Emission Standards – depending on emission standards of specific country
Torque Rise - Tier 4/Stage IV/Japan 2014 (Tier 4)
43%
Torque Rise - Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent
39%
Standard - Ambient Capability
122°F
Derating Altitude - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
12973ft
VHP Range - Net - Metric
216-259 kW (294-353 hp)
Base Power (1st Gear) - Net - Metric
294hp
Standard - Fan Speed - Minimum
550 rpm
Standard - Fan Speed - Maximum
1,450 rpm
Emissions (3)
Tier 2/Stage II/Japan 2001 (Tier 2) Equivalent Emission Standards – depending on emission standards of specific country
Torque Rise - Tier 3/Stage IIIA/Japan 2006 (Tier 3) Equivalent
39%
Emissions (1)
U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final)
VHP Range - Net
216-259 kW (290-348 hp)
Derating Altitude - Tier 4/Stage IV/Japan 2014 (Tier 4)
12500ft
Displacement
763in³
Number of Cylinders
6
Optimized VHP Range - Net
216-259 kW (290-348 hp)
Weights
Operating Weight - Typically Equipped
71454lb
Power Train
Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
Direct drive, power shift, countershaft
Brakes - Dynamic Brake Torque per Wheel
27069.27lb/ft
Brakes - Secondary
Oil-actuated, oil-disc
Brakes - Service
Oil-actuated, oil disc
Brakes - Parking
Spring applied, hydraulically released
Moldboard
Blade Width
16ft
Arc Radius
16.3in
Throat Clearance
5in
Thickness
1in
End Bit - Width
6in
Blade Pull* - Base GVW
41039lb
Cutting Edge Width
8in
Cutting Edge Thickness
1in
Down Force - Maximum GVW
43861lb
Height
31in
Width
16ft
Down Force - Base GVW
30743lb
Blade Pull* - Maximum GVW
52878lb
End Bit - Thickness
0.75in
Note
*Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
Hydraulic System
Circuit Type
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Maximum System Pressure
3590psi
Standby Pressure
856psi
Pump Output*
74gal/min
Note
*Pump output measured at 2,150 rpm.
Operating Specifications
Steering Range - Left/Right
47.5°
Forward - 6th
16mile/h
Forward - 4th
7.6mile/h
Forward - 5th
11.8mile/h
Turning Radius - Outside Front Tires
30.5ft
Forward - 7th
22mile/h
Top Speed - Forward
32.1mile/h
Forward - 3rd
5.5mile/h
Reverse - 6th
25.3mile/h
Reverse - 5th
17.4mile/h
Reverse - 2nd
4.1mile/h
Reverse - 3rd
6mile/h
Forward - 8th
32.1mile/h
Reverse - 1st
2.2mile/h
Forward - 1st
2.8mile/h
Top Speed - Reverse
25.4mile/h
Forward - 2nd
3.8mile/h
Reverse - 4th
9.3mile/h
Articulation Angle - Left/Right
20°
Note
Calculated with no slip and 23.5 R25 L-3 tires.
Service Refill
Fuel Capacity
131gal (US)
Cooling System
18.5gal (US)
DEF Tank
4.2gal (US)
Hydraulic System - Total
38.6gal (US)
Hydraulic System - Tank
18.5gal (US)
Engine Oil
9.5gal (US)
Transmission - Differential - Final Drives
34gal (US)
Tandem Housing - Each
34gal (US)
Front Wheel Spindle Bearing Housing
0.24gal (US)
Circle Drive Housing
2.6gal (US)
Frame
Front Frame Structure - Height
18.1in
Front Frame Structure - Width
14in
Drawbar - Width
3in
Drawbar - Height
8in
Front Axle - Total Oscillation per Side
35°
Circle - Diameter
71.7in
Circle - Blade Beam Thickness
2in
Front Frame Structure - Thickness
0.6in
Front Axle - Wheel Lean
18° Left/17° Right
Front Axle - Height to Center
26.4in
Tandems
Tandem Oscillation - Front Up
15°
Sidewall Thickness - Outer
0.9in
Sidewall Thickness - Inner
0.9in
Tandem Oscillation - Front Down
25°
Height
25.5in
Width
9.3in
Drive Chain Pitch
2.5in
Wheel Axle Spacing
72.5in
Blade Range
Maximum Blade Position Angle
65°
Maximum Lift Above Ground
15.7in
Maximum Depth of Cut
18.5in
Maximum Shoulder Reach Outside of Tires - Right
91in
Moldboard Sideshift - Left
29.1in
Circle Centershift - Right
22in
Circle Centershift - Left
27.2in
Moldboard Sideshift - Right
31.1in
Maximum Shoulder Reach Outside of Tires - Left
91in
Blade Tip Range - Forward
40°
Blade Tip Range - Backward
5°
Ripper
Ripping Depth - Maximum
17.8in
Shank Holder Spacing - Minimum
17.5in
Ripper Shank Holders
7
Penetration Force
30311lb
Pry-Out Force
43700lb
Machine Length Increase, Beam Raised
63.4in
Shank Holder Spacing - Maximum
20in
Weights Tier 4/Stage IV/Japan 2014 (Tier 4 Final)*
Gross Vehicle Weight - Maximum Tested - Total
84877lb
Gross Vehicle Weight - Base** - Total
63528lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
52201lb
Gross Vehicle Weight - Typically Equipped - Total
71454lb
Gross Vehicle Weight - Maximum Tested - Front Axle
26125lb
Gross Vehicle Weight - Typically Equipped - Front Axle
19253lb
Gross Vehicle Weight - Maximum Tested - Rear Axle
58753lb
Gross Vehicle Weight - Base** - Front Axle
17932lb
Gross Vehicle Weight - Base** - Rear Axle
45596lb
Note (1)
*For machines not equipped with Tier 4 Final emission engine, subtract 150 kg (331 lb) from rear axle weight and total weight.
Note (2)
**Base operating weight calculated on standard machine configuration with 23.5 R25 tires, full fuel tank operator and ROPS cab.
Dimensions (Approximate)
Ground Clearance - Rear Axle
15.6in
Length - Counterweight to Ripper
474.4in
Length - Front Axle to Moldboard
120.7in
Length - Front Axle to Mid Tandem
290in
Height - Top of Cylinders
121.6in
Width - Tire Center Lines
106.4in
Width - Outside Rear Tires
134.3in
Length - Between Tandem Axles
72.5in
Height - Top of Cab
146.4in
Width - Outside Front Tires
134.3in
Height - Front Axle Center
28.9in
Length - Front Tire to Rear of Machine - Including Tow Hitch
417in
Height - Exhaust Stack
140in
Standards
Steering
ISO 5010:2007
Brakes
ISO 3450:2011
Sound
ISO 6394:2008/ISO 6395:2008/ISO 6396:2008
ROPS/FOPS
ISO 3471:2008/ISO 3449:2005
Note (1)
The dynamic spectator sound power level is 109 dB(A) for Stage IV certified configurations and 109 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. The machine was equipped with a sound suppression system.
Note (2)
The dynamic operator sound pressure level is 71 dB(A) for Stage IV certified configurations and 72 dB(A) for Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standard machines when measured according to the dynamic test procedures that are specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and the cab windows closed. The cab was properly installed and maintained. The machine was equipped with a sound suppression system.
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Net
Gear - Reverse 3rd-6th
298hp
Gear - Forward 8th
348hp
Gear - Forward 3rd
298hp
Gear - Forward 6th
320hp
Gear - Forward 5th
311hp
Gear - Reverse 1st
290hp
Gear - Reverse 2nd
290hp
Gear - Forward 4th
304hp
Gear - Forward 7th
328hp
Gear - Forward 1st
290hp
Gear - Forward 2nd
290hp
Variable Power Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final), Tier 3/Stage IIIA/Japan 2006 (Tier 3) or Tier 2/Stage II/Japan 2001 (Tier 2) - Metric
Gear - Forward 4th
309hp
Gear - Reverse 1st
294hp
Gear - Forward 3rd
302hp
Gear - Reverse 3rd-6th
302hp
Gear - Reverse 2nd
294hp
Gear - Forward 7th
332hp
Gear - Forward 6th
325hp
Gear - Forward 8th
353hp
Gear - Forward 1st
294hp
Gear - Forward 5th
315hp
Gear - Forward 2nd
294hp
Optional Tire Arrangements
Wheel Group - 19.5×25 MP (1)
Tires: 23.5R25 Bridgestone VKT 2 Star
Wheel Group - 19.5×25 MP (2)
Tires: 23.5R25 Bridgestone VKT 1 Star
Wheel Group - 19.5×25 MP (3)
Tires: 23.5R25 Bridgestone VJT 1 Star
Wheel Group - 19.5×25 MP (4)
Tires: 23.5R25 Michelin XHA 2 Star
Wheel Group - 19.5×25 MP (5)
Tires: 23.5R25 Michelin XLDD 2 Star L5
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonnes (3.152 tons).
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Adjustable Electric Arm rest
Adjustable wrist rest
Air conditioner with heater
Articulation, automatic Return-to-Center
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside the cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Information display touch screen
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, cloth-covered, comfort air suspension
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage dry type radial seal with service indicator through messenger and automatic dust ejector
Air-to-air after cooler (ATAAC)
Auto Diff Lock
Belt, serpentine, automatic tensioner
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent Power to ground
Critically Low Fluid Level Monitoring System
Differential, lock/unlock
Drain, engine oil, high speed
Electronic over speed protection
Engine ECO Mode: Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent emission standards
Engine, compression brake
Ether starting aid
Fuel tank, fast fill, ground level
Fuel-water separator
Hydraulic Demand Fan
Muffler, under hood (Tier 2/Stage II/Japan 2001 (Tier 2) and Tier 3/Stage IIIA/Japan 2006 (Tier 3)
OK-to-Start
Optimized VHP
Parking brake – multi disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Three variations of the C13 engine. One meets U.S. EPA Tier 4 Final/EU Stage V/Japan 2014 (Tier 4 Final) emission standards and is required for sale in higher regulated countries. The other options are capable of meeting Tier 2/Stage II/Japan 2001 (Tier 2) or Tier 3/Stage IIIA/Japan 2006 (Tier 3) equivalent emission standards and are available for lesser or non-regulated countries, depending on the emission standards of the specific country.
Transmission, 8F/6R, power shift
VIMS no telematics
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, heavy duty, 1,400 CCA
Breaker panel
Electrical system, 24V
Lights: brake, reversing, roof-mounted roading, stop and tail (LED), work front
Product Link
Starter, electric, heavy duty
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator not present monitoring System
Paint, glare reducing – top of front frame, rear enclosure an ripper cylinders
Rearview camera
Seat belt indicator
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: – Fixed front with intermittent wiper – Door with intermittent wipers (2)
Windows, tempered: – Left and right side wipers – Rear with intermittent wiper
OTHER STANDARD EQUIPMENT
3-Bolt blade Bracket
AccuGrade ARO
Accumulators, blade lift
Brake accumulators, dual certified
Cat Grade Control Cross Slope
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges, curved DH-2 steel: – 203 mm × 25 mm (8 in × 1 in) – 19 mm (3∕4 in) mounting bolts
Doors (four), engine compartment, (two left, two right hand) locking
Doors, two service, left and right side
Drawbar – six shoe with replaceable wear strips
End bits, 16 mm (5∕8 in) DH-2 steel, 19 mm (3∕4 in) mounting bolts
Fast fill fuel, 567.8 L/min (150 gpm)
Fluid check
Frame, articulated, with safety lock
Hydraulics, load-sensing
Metallic Fuel tank, 496 L (131 gal)
Metallic DCM wear strips
Modular cooling package
Moldboard: – 4880 mm × 787 mm × 25 mm (16 ft × 31 in × 1 in) – Hydraulic side shift and tip
Radiator, two cleanout access doors
Rear bumper
Rear tandem access steps and hand bars
S∙O∙S ports: engine, hydraulic, transmission, coolant
Tandem walkway
Top adjust circle wear strips
Tow hitch (not available with ripper)
TIRES, RIMS, AND WHEELS
A partial allowance for tires on 597 mm × 609.6 mm (23.5 in × 24 in) multi-piece rims is included in the base machine price and weight
FLUIDS
Extended Life Coolant to –35° C (–31° F)
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with curved cutting edge 203 mm × 25 mm (8 in × 1 in)
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package
GUARDS
Debris guard
Front axle cylinder guard
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
OTHER ATTACHMENTS
Auto-lube, Centro-matic
Auto-lube, ripper enhancement
Control, blade, variable float
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves Base+1
Hydraulic arrangements with additional hydraulic valves Base+5
Product Link Elite dual
Rim, 495.3 mm × 635 mm (19.5 in × 25 in) MP (spare)
Weather, Cold Plus package