-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
Engine
Base Power (1st Gear) - Net
238hp
Engine Model
Cat C13
Bore
5.1in
Stroke
6.2in
Speed at Rated Power
1,850 rpm
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
122°F
Note (2)
Optimized VHP Plus is standard for the 14M3.
Torque Rise
41%
Maximum Altitude - Full Power
13900ft
Maximum Torque - VHP Plus
1137lb/ft
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)
14349ft
Maximum Altitude - Full Power (Tier 2)
12049ft
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum
550 rpm
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Displacement
763in³
Number of Cylinders
6
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum
1,600 rpm
Weights
Operating Weight - Typically Equipped
57250lb
Gross Vehicle Weight - Base* - Total
50980lb
Gross Vehicle Weight - Base* - Front Axle
13994lb
Gross Vehicle Weight - Typically Equipped - Total
57250lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005lb
Gross Vehicle Weight - Typically Equipped - Front Axle
15245lb
Gross Vehicle Weight - Base* - Rear Axle
36994lb
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Moldboard
Blade Width
14ft
Arc Radius
16.3in
Throat Clearance
4.6in
Blade Width - With End Bits
169in
Blade Height - With Cutting Edge
24.9in
Blade Width - Without End Bits
164in
Blade Height - Without Cutting Edge
23in
Frame
Circle - Outer Diameter
71.7in
Front Axle - Wheel Lean - Left/Right
17.1°
Front Axle - Total Oscillation per Side
32°
Service Refill Capacities
Transmission and Differential
23.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8gal (US)
Hydraulic System
33gal (US)
Circle Drive
1.8gal (US)
Cooling System
15.9gal (US)
Fuel Tank
109.9gal (US)
Blade Range
Maximum Depth of Cut
23.3in
Circle Centershift - Left
25.6in
Maximum Lift Above Ground
16.5in
Circle Centershift - Right
20.5in
Blade Tip Range - Backward
5°
Maximum Shoulder Reach Outside of Tires - Right
78.9in
Moldboard Sideshift - Right
31.1in
Moldboard Sideshift - Left
29.1in
Maximum Shoulder Reach Outside of Tires - Left
73.6in
Blade Tip Range - Forward
40°
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Joystick, power adjustable armrests
Air conditioner with heater
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
Gauges, machine level
Message display
Joystick gear selection
Joystick hydraulic controls for implements, steering, transmission
Ladders, cab, left and right side
Lights, left and right side lights
Lights, night time cab, LED
Meter, hour, digital
Mirror, inside rearview, wide angle
Power port, 12V
Radio ready, entertainment
ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
Seat, mechanical suspension, cloth
Storage compartments
Throttle control, electronic
POWER TRAIN
Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
Articulation, automatic Return-to-Center
Air-to-Air After Cooler (ATAAC)
Auto Diff Lock
Brake wear indication
Brakes, oil disc, four-wheel, hydraulic
Consistent power to ground
Monitoring system
Clutch, circle drive slip
Differential, lock/unlock*
Drain, engine oil, ecology
Demand fan, hydraulic
Engine ECO Mode
Ether starting aid
Fuel tank, ground level
Fuel-water separator
Hydraulic demand fan
Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
Optimized VHP
Parking brake - multi disc, sealed, oil-cooled
Priming pump, fuel
Sediment drain, fuel tank
Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
Transmission, 8F/6R, power shift, direct drive
ELECTRICAL
Alternator, 150 ampere, sealed
Batteries, maintenance free, HD, 1,125 CCA
Breaker panel
Electrical system, 24V*
Belt, serpentine, automatic tensioner
Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
Product Link
Starter, electric
Service lights, enclosure, rear, LED
SAFETY
Alarm, back up
Ground level engine shutdown
Hammer (emergency exit)
Horn, electric
Lockout, hydraulic implement for roading
Operator Not Present Monitoring system
Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
Seat belt, retractable 76 mm (3 in)
Secondary steering
Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)
TECHNOLOGY
Cat GRADE with Cross Slope
Stable Blade
Advanced Control Joysticks
Auto Articulation
GUARDS
Debris guard
Front axle cylinder guards
Rear fenders
Sound suppression, engine enclosure and transmission
Transmission guard
Accumulators, blade lift
Fast fill fuel, 378.5 L/min (100 gal/min)
Metallic DCM wear strips
OTHER ATTACHMENTS
Moldboard, 4.9 m (16 ft)
Heater, engine coolant, 120V
Heater, engine coolant, 240V
Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
Product Link satellite, cellular
Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
Snow wing, mounting frame ready
Fast fill
WORK TOOLS/G.E.T.
4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
Push block, counterweight
Ripper, rear
Tooth, ripper
FLUIDS
Coolant, -51 degrees C (-60 degrees F)