Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 115 ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link ready

Working lights

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air-to-air aftercooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 diesel with automatic engine derate and idle control

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

Variable Horsepower (VHP)

Blade Float

Bumper, rear

CD ROM parts book

Circle drive slip clutch

Cutting edges, 152 mm x 16 mm (6 in x 5/8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe, replaceable nylon composite wear strips

End bits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) blade with hydraulic sideshift and mechanical tip

Moldboard, 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) blade with hydraulic sideshift and tip

Scheduled Oil Sampling (S•O•SSM) ports, engine, hydraulic, transmission, and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes

Extended Life Coolant to -35 degrees Celcius (-30 degrees Fahrenheit)

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges

Guard, transmission

Cab, rollover protective structure (ROPS)

Cab, non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-type

Bar mounted, low directional, and headlights

LED Lights

Rotating amber beacon

Combination headlight

Cab and bar mounted, high, directional headlights, and work lights

Rear facing cab lights

Digital Blade Slope Meter

Product Link

Product Link Elite

Snow wing mounting, frame-ready

Grade Attachment Ready Option (ARO)

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220v

Circle Saver

Ripper tow package

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow, and snow wing

Blade, 3658 mm x 610 mm x 22 mm (12 ft x 24 in x 7/8 in) with hydraulic sideshift and tip and 5/8 in end bits cutting edge 203 mm x 19 mm (8 in x 3/4 in) - for use with 4.3 m (14 ft) blade

End bits, overlay, reversible pair for use with 203 mm (8 in) cutting edges