-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
Engine
Base Power (1st Gear) - Net
213hp
Engine Model
Cat® C9
Base Power (1st Gear, AWD Off) - Net
213hp
Base Power (1st Gear) - Net - Metric
216hp
VHP Plus Range - Net
159-200 kW (213-268 hp)
VHP Plus Range - Net - Metric
159-200 kW (216-272 hp)
Displacement
537in³
Bore
4.4in
Stroke
5.9in
Torque Rise - VHP Plus
40%
Maximum Torque - AWD On
991lb/ft
Speed at Rated Power
2,000 rpm
Number of Cylinders
6
Derating Altitude
10000ft
High Ambient - Fan Speed - Maximum
1,650 rpm
High Ambient - Fan Speed - Minimum
600 rpm
High - Ambient Capability
122°F
Emissions
Emissions equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Note (1)
Maximum torque (VHP Plus) measured at 1,000 rpm.
Note (2)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Note (3)
Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan running at minimum speed, air cleaner, muffler and alternator.
Note (4)
Power as declared per ISO 14396; Rated Speed = 2,000 rpm; AWD = 201 kW (269 hp)
Note (5)
No engine derating required up to 3048 m (10,000 ft).
Weights
Operating Weight - Typically Equipped
45432lb
Gross Vehicle Weight - Typically Equipped
45432lb
Note
Base operating weight on standard machine configuration is calculated with full fuel tank, coolant, lubricants, operator and 14.0R24 tires with multi-piece (MP) rims.
Power Train
Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
Direct drive, power shift, countershaft
Brakes - Service
Multiple oil disc
Brakes - Service - Surface Area
3565in²
Brakes - Parking
Multiple oil disc
Brakes - Secondary
Dual circuit control system
Moldboard
Blade Width
12ft
Moldboard - Width
12ft
Moldboard - Height
24in
Moldboard - Thickness
0.87in
Arc Radius
16.3in
Throat Clearance
3.7in
Cutting Edge Width
6in
Cutting Edge Thickness
0.6in
End Bit - Width
6in
End Bit - Thickness
0.6in
Blade Pull - Base GVW - AWD
35344lb
Blade Pull - Maximum GVW - AWD
47515lb
Down Pressure - Base GVW - AWD
18868lb
Down Pressure - Maximum GVW - AWD
28998lb
Note
Blade pull calculated at 0.9 traction coefficient, which is equal to no-slip conditions, and Gross Vehicle Weight (GVW).
Hydraulic System
Circuit Type
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Pump Output
55.7gal/min
Maximum System Pressure
3500psi
Standby Pressure
450psi
Note
Pump output measured at 2,150 rpm.
Operating Specifications
Top Speed - Forward
29.5mile/h
Top Speed - Reverse
23.3mile/h
Turning Radius - Outside Front Tires
24.93ft
Steering Range - Left/Right
47.5 degrees
Articulation Angle - Left/Right
20 degrees
Forward - 1st
2.5mile/h
Forward - 2nd
3.5mile/h
Forward - 3rd
5mile/h
Forward - 4th
7mile/h
Forward - 5th
10.8mile/h
Forward - 6th
14.7mile/h
Forward - 7th
20.3mile/h
Forward - 8th
29.5mile/h
Reverse - 1st
2mile/h
Reverse - 2nd
3.8mile/h
Reverse - 3rd
5.5mile/h
Reverse - 4th
8.5mile/h
Reverse - 5th
16mile/h
Reverse - 6th
23.3mile/h
Service Refill
Fuel Capacity
110gal (US)
Cooling System
10.6gal (US)
Hydraulic System - Tank
16.9gal (US)
Engine Oil
7.9gal (US)
Transmission - Differential - Final Drives
17.2gal (US)
Tandem Housing - Each
21.1gal (US)
Front Wheel Spindle Bearing Housing
0.13gal (US)
Circle Drive Housing
1.8gal (US)
Frame
Circle - Diameter
61.1in
Circle - Blade Beam Thickness
1.6in
Circle - Height
6.3in
Drawbar - Height
6in
Drawbar - Width
3in
Front Frame Structure - Height
12in
Front Frame Structure - Width
12in
Front Frame Structure - Thickness
0.6in
Front Axle - Height to Center
22.5in
Front Axle - Wheel Lean - Left/Right
18 degrees
Front Axle - Total Oscillation per Side
32 degrees
Tandems
Height
22.5in
Width
8in
Sidewall Thickness - Inner
1in
Sidewall Thickness - Outer
0.7in
Drive Chain Pitch
2in
Wheel Axle Spacing
60in
Tandem Oscillation - Front Up
15 degrees
Tandem Oscillation - Front Down
25 degrees
Blade Range
Circle Centershift - Right
28.7in
Circle Centershift - Left
27.4in
Moldboard Sideshift - Right
37.4in
Moldboard Sideshift - Left
32.3in
Maximum Blade Position Angle
90 degrees
Blade Tip Range - Forward
40 degrees
Blade Tip Range - Backward
5 degrees
Maximum Shoulder Reach Outside of Tires - Right
89.7in
Maximum Shoulder Reach Outside of Tires - Left
82.3in
Maximum Lift Above Ground
17.8in
Maximum Depth of Cut
29.5in
Ripper
Ripping Depth - Maximum
16.8in
Ripper Shank Holders
5
Ripper Shank Holder Spacing
21in
Penetration Force
20540lb
Pry-Out Force
26259lb
Machine Length Increase, Beam Raised
39.2in
Scarifier
Front, V-Type, 5 or 11 Tooth - Working Width
47.4in
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18.4in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5, 11
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
4.6in
Mid, V-Type - Working Width
46.6in
Mid, V-Type - Scarifying Depth, Maximum
11.5in
Mid, V-Type - Scarifier Shank Holders
11
Mid, V-Type - Scarifier Shank Holder Spacing
4.6in
Rear - Working Width
91in
Rear - Scarifying Depth, Maximum
10.5in
Rear - Scarifier Shank Holders
9
Rear - Scarifier Shank Holder Spacing
10.5in
Weights - AWD
Gross Vehicle Weight - Base - Total
39270lb
Gross Vehicle Weight - Base - Front Axle
10992lb
Gross Vehicle Weight - Base - Rear Axle
28278lb
Gross Vehicle Weight - Maximum - Total
52794lb
Gross Vehicle Weight - Maximum - Front Axle
16894lb
Gross Vehicle Weight - Maximum - Rear Axle
35900lb
Gross Vehicle Weight - Typically Equipped - Total
45431lb
Gross Vehicle Weight - Typically Equipped - Front Axle
13455lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
31976lb
Dimensions
Height - Top of Cab
130in
Height - Top of Cab Product Link
133in
Height - Front Axle Center
23.5in
Length - Between Tandem Axles
60in
Length - Front Axle to Moldboard
100in
Length - Front Axle to Mid Tandem
241in
Length - Front Tire to Rear of Machine
344in
Length - Push Plate to Ripper
399in
Length - Push Plate to Ripper Retracted
386in
Ground Clearance - Rear Axle
13.3in
Height - Top of Cylinders
119in
Height - Exhaust Stack - AWD
128in
Width - Tire Center Lines Front - AWD
87in
Width - Outside Rear Tires
98in
Width - Outside Front Tires - AWD
102in
Standards
ROPS/FOPS
ISO 3471:2008, ISO 3449:2005 Level II
Steering
ISO 5010:2007
Brakes
ISO 3450:1996
Sound
ISO 6394:2008, ISO 6395:2008
Note (1)
The static operator sound pressure level is 73 dB(A) when “ISO 6394:2008†is used to measure the value for an enclosed cab. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Note (2)
The dynamic spectator sound pressure level is 107 dB(A) when “ISO 6395:2008†is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Net Power - VHP Plus
Gear - Forward 1st
213hp
Gear - Forward 2nd
218hp
Gear - Forward 3rd
223hp
Gear - Forward 4th
228hp
Gear - Forward 5th
233hp
Gear - Forward 6th
238hp
Gear - Forward 7th
243hp
Gear - Forward 8th
248hp
Gear - Reverse 1st
213hp
Gear - Reverse 2nd
218hp
Gear - Reverse 3rd-6th
223hp
Net Power - AWD Off
Gear - Forward 1st
213hp
Gear - Forward 2nd
218hp
Gear - Forward 3rd
223hp
Gear - Forward 4th
228hp
Gear - Forward 5th
233hp
Gear - Forward 6th
238hp
Gear - Forward 7th
243hp
Gear - Forward 8th
248hp
Gear - Reverse 1st
213hp
Gear - Reverse 2nd
218hp
Gear - Reverse 3rd-6th
223hp
Net Power - AWD On
Gear - Forward 1st
223hp
Gear - Forward 2nd
238hp
Gear - Forward 3rd
243hp
Gear - Forward 4th
248hp
Gear - Forward 5th
268hp
Gear - Forward 6th
268hp
Gear - Forward 7th
268hp
Gear - Forward 8th
268hp
Gear - Reverse 1st
213hp
Gear - Reverse 2nd
218hp
Gear - Reverse 3rd-6th
223hp
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C9 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Emissions equivalent to Tier 3 and Stage IIIA.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil-cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Product Link Ready
Starter, electric
OPERATOR ENVIRONMENT
Accelerator
Air conditioning with heater
Arm and wrist rest, electronically adjustable
Articulation, automatic Return-to-Center
Cat Messenger operator information system
Centershift pin indicator
Coat hook
Cup holder
Display, digital speed and gear
Doors, left and right side with wiper
Gauge, machine level
Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp
Hour meter, digital
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
OTHER STANDARD EQUIPMENT
Anti-glare paint
Bumper, rear, integrated with hitch
CD ROM Parts Book
Clutch, circle drive slip
Cutting edges: - 152 × 16 mm (6 × 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
Doors (3), engine compartment, locking
Drawbar - 6 shoes, replaceable wear strips
Electrical hydraulic valves, hydraulic lines for base 8 functions
Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
Fluid check, ground level
Frame, articulated, with safety lock
Ground level engine shutdown
Ground level fueling
Hammer (emergency exit)
Horn, electric
Hydraulic lines for base functions
Lockout, hydraulic implement (for roading and servicing)
Moldboard - 3658 × 610 × 22 mm (12 ft × 24 in × 7/8 in)
Mounting, cab roof accessories
Pump, hydraulic, high capacity, 98 cm³ (6 in³)
Radiator, cleanout access
Secondary steering
Serviceability, left-hand side
S·O·S℠ ports: engine, hydraulic, transmission, coolant, fuel
Tandem walkway/guards
Tool box
Tow hitch
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
GUARDS
Articulation guard - 13 kg (30 lb)
Axle hose guard - 7 kg (15 lb)
Fenders, front - 56 kg (123 lb)
Fenders, rear - 156 kg (344 lb)
Sound guard (bottom) - 110 kg (243 lb)
Transmission guard - 141 kg (311 lb)
OTHER ATTACHMENTS
AccuGrade ARO - 39 kg (85 lb)
Accumulators, blade lift - 77 kg (170 lb)
Camera, rearview - 9 kg (20 lb)
Cat Grade Control Cross Slope - 75 kg (165 lb)
Cat Product Link 321 (Satellite) - 13 kg (29 lb)
Cat Product Link 522 (Cellular) - 13 kg (29 lb)
Compressor/tank, air - 27 kg (50 lb)
Heater, engine coolant: 120V - 1 kg (3 lb)
Heater, engine coolant: 240V - 1 kg (3 lb)
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier
Security system - 5 kg (11 lb)
Snow wing mounting, frame ready - 111 kg (245 lb)
Sound suppression - 15 kg (33 lb)
Starting aid, ether - 0.5 kg (1 lb)
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft) - 113 kg (249 lb)
Endbits, overlay - 24 kg (52 lb)
Front lift group, mounting - 5 kg (11 lb)
Front lift group - 680 kg (1,500 lb)
Mid-Mount Scarifier, Package - 942 kg (2,077 lb)
Mid-Mount Scarifier, Mounting - 57 kg (125 lb)
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)- 100 kg (220 lb)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in) - 257 kg (567 lb)
Moldboard: 4877 × 686 × 25 mm (16 ft × 27 in × 1 in) - 472 kg (1,041 lb)
Push plate - 885 kg (1,950 lb)
Ripper, mounting - 32 kg (70 lb)
Ripper, rear - 962 kg (2,120 lb)
Ripper tooth - 28 kg (61 lb)
Scarifier, front - 434 kg (956 lb)
MACHINE ARRANGEMENTS
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25