-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
Engine
Engine Model
Cat® 3516E
Emissions
U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
Engine Power - ISO 14396: 2002
1847hp
Gross Power - SAE J1995:2014
1870hp
Net Power - SAE J1349 - Standard Ambient
1739hp
Net Power - SAE J1349 - High Ambient
1696hp
Bore
6.7in
Stroke
8.5in
Displacement
4766in³
Peak Torque - 1,200 rpm - SAE J1995
8549lb/ft
Torque Rise
39%
Note (1)
The power ratings apply when tested under the reference conditions for the specified standard.
Note (2)
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
Note (3)
The gross power advertised is with the fan at maximum speed.
Operating Specifications
Operating Weight - Standard
543772lb
Operating Weight - High Lift
547675lb
Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
60ton (US)
Rated Payload - Standard Lift (Moderate to High Digging Resistance)
50ton (US)
Rated Payload - High Lift (Low to Moderate Digging Resistance)
55ton (US)
Rated Payload - High Lift (Moderate to High Digging Resistance)
50ton (US)
Note
*Please contact your local dealer to determine if your application is suitable for this increased rated payload.
Cat Truck Match - Standard
785/789
Cat Truck Match - High Lift
789/793/794
Bucket Capacity Range
17.2-43.6 m3 (22.3-57 yd3)
Transmission
Transmission Type
Cat Planetary Power Shift
Forward - 1
4.6mile/h
Forward - 2
8mile/h
Forward - 3
13.6mile/h
Reverse - 1
5mile/h
Reverse - 2
8.8mile/h
Reverse - 3
14.9mile/h
Direct Drive - Forward 1
Lock-up disables
Direct Drive - Forward 2
8.7mile/h
Direct Drive - Forward 3
15.2mile/h
Direct Drive - Reverse 1
Lock-up disables
Direct Drive - Reverse 2
9.6mile/h
Direct Drive - Reverse 3
16.8mile/h
Note
Travel speeds based on 58/85-57 tires.
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive Flow Control
Lift/Tilt System - Pump
Variable Displacement Piston
Maximum Flow at 1,700 rpm Engine Speed
541gal/min
Relief Valve Setting - Lift/Tilt
5004psi
Cylinders, Double Acting - Lift, Bore and Stroke
370 × 1713 mm (14.6 × 67.4 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
310 × 1086 mm (12.2 × 42.8 in)
Pilot System
Open Loop and Pressure Reducing
Hydraulic Cycle Times
Rack Back
4.9s
Raise
12.6s
Dump
3.1s
Lower Float Down
4.2s
Complete System Fill
Fuel Tank - Standard
856gal (US)
Fuel Tank - With 24 hr Attachment
1414gal (US)
Cooling System
138gal (US)
Engine Crankcase
76gal (US)
Transmission
110gal (US)
Differential - Final Drives - Front
220gal (US)
Differential - Final Drives - Rear
200gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
270gal (US)
Hydraulic Tank - Steering and Braking
100gal (US)
Oil Renewal System (ORS)*
20gal (US)
Note
*Not available on Tier 4 Final/Stage V machines. Not available in all regions.
Axles
Front
Fixed
Rear
Trunnion
Oscillation Angle
9°
Brakes
Brakes
ISO 3450:2011
Sound Performance - Standard
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
74dB(A)
Machine Sound Level (ISO 6395:2008)
119dB(A)
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
73dB(A)
Machine Sound Level (ISO 6395:2008)
117dB(A)
Note
The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
Steering System - Circuit
Pilot, Load Sensing
Steering System - Pump
Piston, Variable Displacement
Total Steering Angle
80 degrees
Steering Cycle Times - Low Idle
7.6s
Steering Cycle Times - High Idle
4.3s
Dimensions - Standard Lift - Approximate
B-Pin Height - Maximum Lift
28.8ft
Clearance at Maximum Lift
19.8ft
Dump Angle at Maximum Lift
–50.0 degrees
Front Axle Centerline to Bucket Tip
21.9ft
Ground to Bumper Clearance
4.4ft
Ground to Center of Axles
6ft
Ground to Lower Hitch Clearance
2.9ft
Ground to Top of Exhaust Stacks
23.2ft
Ground to Top of Hood
18.6ft
Ground to Top of ROPS
23.4ft
Maximum Overall Height - Bucket Raised
39.3ft
Maximum Overall Length
64.6ft
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift
59.5 degrees
Rack Back Angle - Carry
47.7 degrees
Rack Back Angle - Ground Level
39.7 degrees
Reach - Maximum Lift
9.6ft
Rear Axle - Centerline to Bumper
20.4ft
Tread Width
14.1ft
Wheel Base
22.3ft
Width - Over Tires - With Bulge
18.8ft
Dimensions - High Lift - Approximate
B-Pin Height - Maximum Lift
31.6ft
Clearance at Maximum Lift
22.6ft
Dump Angle at Maximum Lift
–50.0 degrees
Front Axle Centerline to Bucket Tip
24.2ft
Ground to Bumper Clearance
4.4ft
Ground to Center of Axles
6ft
Ground to Lower Hitch Clearance
2.9ft
Ground to Top of Exhaust Stacks
23.2ft
Ground to Top of Hood
18.6ft
Ground to Top of ROPS
23.4ft
Maximum Overall Height - Bucket Raised
42.1ft
Maximum Overall Length
66.9ft
Note
Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.
Rack Angle at Maximum Lift
59.4 degrees
Rack Back Angle - Carry
53.5 degrees
Rack Back Angle - Ground Level
45 degrees
Reach - Maximum Lift
9.4ft
Rear Axle - Centerline to Bumper
20.4ft
Tread Width
14.1ft
Wheel Base
22.3ft
Width - Over Tires - With Bulge
18.8ft
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
POWER TRAIN
Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
Engine prelube
Fuel priming pump (electric)
Ground-level engine shutoff
Engine air intake (above hood) precleaner
Aluminum Modular Radiator (AMR)
Automatic, ether starting aid
Electronic throttle lock
Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
Rimpull control system
Planetary powershift, 3F/3R electronic control transmission
Delayed engine shutdown
Oil-cooled, multi-disc, service brakes
Electro-hydraulic parking brake
LINKAGE
Standard lift
ELECTRICAL
Alternator
Batteries, low maintenance
10/15 amp, 24V to 12V converter
Disconnect switch to bumper
LED warning lights (pattern selectable)
LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
Emergency jump-start receptacle
Starter and transmission lockout in bumper
24V starting and charging system
Electric starters
OPERATOR ENVIRONMENT
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment and two-way thigh support adjustment
Bonded glass, tinted
Trainer seat
Dual-lever lift and tilt function controls
Implement kickouts
Air conditioner
Cab pressure indicator
Graphical touchscreen information display conveys real-time operating information
Heater, defroster, auto temperature controls
Powered cab precleaner
Operator presence status
Starting/charging system malfunction
Electronic OMM
Operator controls help
Two USB charging ports
CB mounting, 12V/24V power and antenna
14-pin service port
12V power
Selectable application profiles
Entertainment radio mute
Push-To-Start (PTS)
Warning/indicator instrumentation
Keypad control with indicator lights
Dome light in cab
Lunchbox and beverage holders
Electro-hydraulic force feedback steering
Vital Information Management System (VIMS™) with information display: external data port, cycle timer
Coat hook
Gauge instrumentation with configurable widgets:
– Status indicators
– Wheel rev counter
– Simplified payload
– Tire pressure monitoring system (optional)
– Bucket angle
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
SAFETY
Ground-access ladders
Rear-vision camera
Front frame access with steps
Front walkway around cab
Pump bay access ladders with T-handle and platform
Tie-offs on ROPS and radiator guards
Steering frame lock
Stairways on both sides of the machine
LED stairway and access lights
Toe kicks
Electric (field and shop) horns
Retractable seatbelt, 76 mm (3 in) wide
Trainer seat with lap belt, 76 mm (3 in) wide
Back-up alarm
Secondary steering
MACHINE CONTROL AND GUIDANCE
MineStar™ Health ready
MineStar GUIDE ready
MineStar Edge ready
FUEL TANK
12 hour (3240 L/856 gal)
COOLING
Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
GROUND-LEVEL SERVICE CENTER
Service center light
Implement and cooling fan oil level indicator
Steering and brake oil level indicator
Window washer solvent level indicator
Transmission oil level indicator
DEF level indicator (if equipped)
Fuel level indicator
Engine oil level indicator
Engine coolant level indicator
Automatic lubrication system grease tank level indicator
DEF purge indicator lamp
Transmission lockout and LED
Starter lockout and LED
Heavy-duty battery disconnect switch
Stairway light switch
Service lighting switch (if equipped)
Fuel shutoff engine shutdown switch
Engine oil fast-fill port
Transmission oil fast-fill port
Steering and brake hydraulic oil fast-fill port
Steering and brake hydraulic oil drain port
Oil renewal system fast-fill port (if equipped)
Engine coolant fast-fill port
DEF fill port (HRC only)
Implement and cooling fan hydraulic oil fast-fill port
Implement and cooling hydraulic oil drain port
Automatic lubrication system grease tank fill port
24V jump-start receptacle
240V jacket water and engine oil heater plug (if equipped)
12V power port
VIMS key switch
14-pin machine data port
SERVICE
EH steering eliminates need for neutralizer adjustment
In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
Pump efficiency monitoring
Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
Rock guards on linkage grease lines
Cat O-ring face seal couplings
Lockable service access doors
Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
High-speed engine oil change system
Ground-level fast-fill fuel system
Transmission guard
Drawbar hitch with pin
Cat XT™ hoses
Left-side service center
Oil sampling valves
Automatic Autolube filling shutoff valve
Telematics and Cat Electronic Technician service port in bumper
Air filter remaining useful life sensor
Premixed 50% concentration of extended-life coolant with freeze protection to –34° C (–29° F)
Rear access to cab and service platform
Load-sensing steering
Supplemental steering system
Vandalism protection caplocks
Cooling cleanout service package
VIMS download and Cat Electronic Technician service port in bumper
Service lights (engine bay, service center)
EH steering eliminates need for neutralizer adjustment
EFFICIENCY
On demand throttle, HP Plus, and Enhanced ECO Modes
Variable displacement implement pumps
Variable displacement load sensing steering
Variable displacement cooling fan pump
Torque converter lock-up clutch
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package
COLD WEATHER
Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0° C [32° F])
240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
Heated mirrors (recommended for below-freezing temperatures)
RIMS AND TIRES
Rims – 1194 mm (47") (47 × 57); 152 mm (6") flange; For use with 58/85-57; 84PR L4 tires
Rims – 1194 mm (47") (47 × 57);127 mm (5") flange; For use with 60/80 R57; L5R XMine D2 SR tires
Tires – 58/85-57 84PR L4 (require 47" rims)
SPARE RIMS
1194 mm (47") 152 mm (44 × 57) (6") flange
1194 mm (47") 127 mm (47 × 57) (5") flange
SOUND
Sound-suppression package