-
Specifications
-
Standard/Optional Equipment
-
360° Tours
- Catalog
Engine
Engine Power - ISO 14396:2002
786hp
Engine Model
Cat® C27
Emissions
Option 1 - U.S. EPA Tier 4 Final/EU Stage V
Rated Speed
1800r/min
Gross Power - SAE J1995:2014
801hp
Net Power - SAE J1349:2011 - Standard Ambient
732hp
Net Power - SAE J1349:2011 - High Ambient
681hp
Emissions
Option 2 - Emits equivalent to U.S. EPA Tier 2
Rated Speed
1800 r/min
Engine Power - ISO 14396:2002
752hp
Gross Power - SAE J1995:2014
766hp
Net Power - SAE J1349:2011 - Standard Ambient
699hp
Net Power - SAE J1349:2011 - High Ambient
648hp
Bore
5.4in
Stroke
6in
Displacement
1649.5in³
Peak Torque - 1,200 rpm
2624lb/ft
Torque Rise
18%
Note
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake sytstem, exhaust system, and alternator.
Transmission
Transmission Type
Cat planetary power shift
Forward - 1
4.6mile/h
Forward - 2
8.2mile/h
Forward - 3
14.5mile/h
Reverse - 1
5.1mile/h
Reverse - 2
9.1mile/h
Reverse - 3
16mile/h
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 2
8.2mile/h
Direct Drive - Forward 3
14.5mile/h
Direct Drive - Reverse 1
5.1mile/h
Direct Drive - Reverse 2
9.1mile/h
Direct Drive - Reverse 3
16mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Operating Specifications
Operating Weight - Standard
178517lb
Bucket Capacity Range
8.6 m³ – 10.0 m³ (11.25 yd³ – 13.0 yd³)
Rated Payload - Standard
17.5ton (US)
Rated Payload - High Lift
17.5ton (US)
Cat Truck Match - Standard
773-775
Cat Truck Match - High Lift
775-777
Hydraulic System - Lift/Tilt
Lift/Tilt System - Circuit
Positive flow control
Lift/Tilt System
Variable displacement piston
Maximum Flow at 1,800 rpm
240gal/min
Relief Valve Setting - Lift/Tilt
4786psi
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Pilot System
Open loop and pressure reducing
Pilot Relief Setting
507psi
Hydraulic Cycle Times
Rack Back
4.3s
Raise
8.6s
Dump
2.9s
Lower
3.7s
Lower Float Down
3.7s
Total Hydraulic Cycle Time - Empty Bucket
13.8s
Hydraulic System - Steering
Steering System - Circuit
Pilot, load sensing
Steering System - Pump
Piston, variable displacement
Maximum Flow at 1,400 rpm
96.2gal/min
Relief Valve Setting - Steering
5004psi
Total Steering Angle
70°
Air Conditioning System
Air Conditioning
• The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. • If equipped with R134a (Global Warming Potential = 1430), the system contains 2.7 kg (5.9 lb) of refrigerant which has a CO2 equivalent of 3.861 metric tonnes (4.256 tons).
Axles
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Brakes
Brakes
ISO 3450: 2011
Service Refill Capacities
Fuel Tank
281gal (US)
Cooling System
54.9gal (US)
Engine Crankcase
20gal (US)
Transmission
29.1gal (US)
Differential - Final Drives - Front
71.6gal (US)
Differential - Final Drives - Rear
68.9gal (US)
Hydraulic System Factory Fill
210gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
68.9gal (US)
Hydraulic Tank - Steering and Braking
34.9gal (US)
Note
Cat U.S. EPA Tier 4 Final/EU Stage V diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, API CK-4, and/or ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1:2006.
Sound Performance - Tier 4 Final / Stage V
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
116dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
Operator Sound Pressure Level (ISO 6396:2008)
72dB(A)
Machine Sound Power Level (ISO 6395:2008)
116dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72dB(A)
Machine Sound Power Level (ISO 6395:2008)*
114dB(A)
Note (1)
*Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
Ground to Top of ROPS
17.2ft
Ground to Top of Exhaust Stacks
16.6ft
Ground to Top of Hood
12.7ft
Ground to Bumper Clearance
3.5ft
Rear Axle - Centerline to Bumper
12.5ft
Front Axle Centerline to Bucket Tip
15.4ft
Wheel Base
15.1ft
Maximum Overall Length
42.9ft
Ground to Lower Hitch Clearance
2ft
Ground to Center of Front Axle
4.2ft
Clearance at Maximum Lift
7.2ft
Rack Back Angle at Ground Level
40.4°
Rack Back Angle at Carry
48.8°
B-Pin Height - Maximum Lift
19.7ft
Maximum Overall Height - Bucket Raised
27.2ft
Rack Angle at Maximum Lift
63.7°
Dump Angle at Maximum Lift
45°
Reach - Maximum Lift
7.2ft
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
Dimensions (Approximate) - High Lift Linkage
Ground to Top of ROPS
17.2ft
Ground to Top of Exhaust Stacks
16.6ft
Ground to Top of Hood
12.7ft
Ground to Bumper Clearance
3.5ft
Rear Axle - Centerline to Bumper
12.5ft
Front Axle Centerline to Bucket Tip
17.8ft
Wheel Base
15.1ft
Maximum Overall Length
45.3ft
Ground to Lower Hitch Clearance
2ft
Ground to Center of Front Axle
4.2ft
Clearance at Maximum Lift
14.8ft
Rack Back Angle at Ground Level
39.9°
Rack Back Angle at Carry
49.3°
B-Pin Height - Maximum Lift
21.2ft
Maximum Overall Height - Bucket Raised
28.7ft
Rack Angle at Maximum Lift
60.6°
Dump Angle at Maximum Lift
51°
Reach - Maximum Lift
8.5ft
Note
Specifications are calculated with 9.0 m3 (11.8 yd3) rock bucket and Bridgestone 45/65R39 VSDL One Star tires.
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
Cat Vision, rear vision camera system
12-volt power port
Coat hook
Cab precleaner, powered
Electro-hydraulic tilt and lift controls (seat mounted)
Flip-up armrest
Heater and defroster
CB radio ready
Horn, electric
Implement hydraulic lockout
Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature
Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear
Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock
Light, dome (cab)
Lunchbox and beverage holders
Mirrors, rearview (externally mounted)
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) system with steering lock
Tinted glass
Trainer seat with lap belt
Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
POWERTRAIN
Brakes, full hydraulic, enclosed, oil-disc
Axle-shaft oil-disc service brake
Electro hydraulic parking brake
Case drain screens
Cat clean emission module (CEM) - (Tier 4 only)
Demand fan
Engine Cat C27
Fuel priming pump (electric)
Ground level shutdown switch
Mufflers (under hood) (Tier 2 equivalent only)
Precleaner, engine air intake
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid, (ether) manual override
Throttle Lock
Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
ELECTRICAL
Alarm, back-up
Alternator, 150 amp
Batteries, maintenance free (2 – 1,400 CCA)
Converter, 10/15 amp, 24V to 12V
Deutsch component connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter, electric
Auxiliary start receptacle
OTHER
Automatic bucket lift kickout/positioner
Axle temperature sensor
Battery disconnect and jump start receptacle, bumper
Coupling, Caterpillar O-ring face seals
Economy mode with on demand throttle
Emergency platform exit
Engine, crankcase, 500 hour interval with CH4
Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown
Fenders, steel (front)
Guards, crankcase and powertrain
Ground level lockable battery disconnect switch
Grouped/labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Positive flow control hydraulic system
Product Link™
Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
Stairway, left and right rear access
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Venturi stack
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
Cat Vision, rear vision camera system
12-volt power port
Coat hook
Cab precleaner, powered
Electro-hydraulic tilt and lift controls (seat mounted)
Flip-up armrest
Heater and defroster
CB radio ready
Horn, electric
Implement hydraulic lockout
Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature
Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear
Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock
Light, dome (cab)
Lunchbox and beverage holders
Mirrors, rearview (externally mounted)
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) system with steering lock
Tinted glass
Trainer seat with lap belt
Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
POWERTRAIN
Brakes, full hydraulic, enclosed, oil-disc
Axle-shaft oil-disc service brake
Electro hydraulic parking brake
Case drain screens
Cat clean emission module (CEM) - (Tier 4 only)
Demand fan
Engine Cat C27
Fuel priming pump (electric)
Ground level shutdown switch
Mufflers (under hood) (Tier 2 equivalent only)
Precleaner, engine air intake
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid, (ether) manual override
Throttle Lock
Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
ELECTRICAL
Alarm, back-up
Alternator, 150 amp
Batteries, maintenance free (2 – 1,400 CCA)
Converter, 10/15 amp, 24V to 12V
Deutsch component connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter, electric
Auxiliary start receptacle
OTHER
Automatic bucket lift kickout/positioner
Axle temperature sensor
Battery disconnect and jump start receptacle, bumper
Coupling, Caterpillar O-ring face seals
Economy mode with on demand throttle
Emergency platform exit
Engine, crankcase, 500 hour interval with CH4
Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown
Fenders, steel (front)
Guards, crankcase and powertrain
Ground level lockable battery disconnect switch
Grouped/labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Positive flow control hydraulic system
Product Link™
Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
Stairway, left and right rear access
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Venturi stack
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
Cat Vision, rear vision camera system
12-volt power port
Coat hook
Cab precleaner, powered
Electro-hydraulic tilt and lift controls (seat mounted)
Flip-up armrest
Heater and defroster
CB radio ready
Horn, electric
Implement hydraulic lockout
Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature
Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear
Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock
Light, dome (cab)
Lunchbox and beverage holders
Mirrors, rearview (externally mounted)
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) system with steering lock
Tinted glass
Trainer seat with lap belt
Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
POWERTRAIN
Brakes, full hydraulic, enclosed, oil-disc
Axle-shaft oil-disc service brake
Electro hydraulic parking brake
Case drain screens
Cat clean emission module (CEM) - (Tier 4 only)
Demand fan
Engine Cat C27
Fuel priming pump (electric)
Ground level shutdown switch
Mufflers (under hood) (Tier 2 equivalent only)
Precleaner, engine air intake
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid, (ether) manual override
Throttle Lock
Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
ELECTRICAL
Alarm, back-up
Alternator, 150 amp
Batteries, maintenance free (2 – 1,400 CCA)
Converter, 10/15 amp, 24V to 12V
Deutsch component connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter, electric
Auxiliary start receptacle
OTHER
Automatic bucket lift kickout/positioner
Axle temperature sensor
Battery disconnect and jump start receptacle, bumper
Coupling, Caterpillar O-ring face seals
Economy mode with on demand throttle
Emergency platform exit
Engine, crankcase, 500 hour interval with CH4
Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown
Fenders, steel (front)
Guards, crankcase and powertrain
Ground level lockable battery disconnect switch
Grouped/labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Positive flow control hydraulic system
Product Link™
Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
Stairway, left and right rear access
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Venturi stack
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
Cat Vision, rear vision camera system
12-volt power port
Coat hook
Cab precleaner, powered
Electro-hydraulic tilt and lift controls (seat mounted)
Flip-up armrest
Heater and defroster
CB radio ready
Horn, electric
Implement hydraulic lockout
Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature
Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear
Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock
Light, dome (cab)
Lunchbox and beverage holders
Mirrors, rearview (externally mounted)
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) system with steering lock
Tinted glass
Trainer seat with lap belt
Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
POWERTRAIN
Brakes, full hydraulic, enclosed, oil-disc
Axle-shaft oil-disc service brake
Electro hydraulic parking brake
Case drain screens
Cat clean emission module (CEM) - (Tier 4 only)
Demand fan
Engine Cat C27
Fuel priming pump (electric)
Ground level shutdown switch
Mufflers (under hood) (Tier 2 equivalent only)
Precleaner, engine air intake
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid, (ether) manual override
Throttle Lock
Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
ELECTRICAL
Alarm, back-up
Alternator, 150 amp
Batteries, maintenance free (2 – 1,400 CCA)
Converter, 10/15 amp, 24V to 12V
Deutsch component connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter, electric
Auxiliary start receptacle
OTHER
Automatic bucket lift kickout/positioner
Axle temperature sensor
Battery disconnect and jump start receptacle, bumper
Coupling, Caterpillar O-ring face seals
Economy mode with on demand throttle
Emergency platform exit
Engine, crankcase, 500 hour interval with CH4
Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown
Fenders, steel (front)
Guards, crankcase and powertrain
Ground level lockable battery disconnect switch
Grouped/labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Positive flow control hydraulic system
Product Link™
Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
Stairway, left and right rear access
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Venturi stack
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
Cab, sound-suppressed and pressurized, rollover protective structure/falling objects protective structure (ROPS/FOPS)
Cat Vision, rear vision camera system
12-volt power port
Coat hook
Cab precleaner, powered
Electro-hydraulic tilt and lift controls (seat mounted)
Flip-up armrest
Heater and defroster
CB radio ready
Horn, electric
Implement hydraulic lockout
Instrumentation, gauges:
– Engine coolant temperature
– Fuel level
– Ground speed
– Gear
– Hydraulic oil temperature
– Speedometer/tachometer
– Torque converter temperature
Instrumentation, warning indicators:
– Action alert system, three category
– Automatic transmission model enable status
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Rimpull control enable status
– Seatbelt warning
– Secondary steering (if equipped)
– Throttle lock status
– Transmission gear
Keypad, control with indicator lights:
– Auto trans mode speed range
– Auto/manual transmission mode
– Fuel economy mode
– Implement kickout
– Lockup clutch
– Reduced rimpull
– Throttle lock
Light, dome (cab)
Lunchbox and beverage holders
Mirrors, rearview (externally mounted)
Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
Seat belt, retractable, 76 mm (3 in) wide
Steering and Transmission Integrated Control (STIC™) system with steering lock
Tinted glass
Trainer seat with lap belt
Vital Information Management System (VIMS™) with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Cat Production Measurement
– Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
POWERTRAIN
Brakes, full hydraulic, enclosed, oil-disc
Axle-shaft oil-disc service brake
Electro hydraulic parking brake
Case drain screens
Cat clean emission module (CEM) - (Tier 4 only)
Demand fan
Engine Cat C27
Fuel priming pump (electric)
Ground level shutdown switch
Mufflers (under hood) (Tier 2 equivalent only)
Precleaner, engine air intake
Radiator, Aluminum Modular (AMR)
Separated cooling system
Starting aid, (ether) manual override
Throttle Lock
Torque Converter, Impeller Clutch (ICTC) with lock-up clutch (LUC), and rimpull control system
Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
ELECTRICAL
Alarm, back-up
Alternator, 150 amp
Batteries, maintenance free (2 – 1,400 CCA)
Converter, 10/15 amp, 24V to 12V
Deutsch component connectors
Electrical system, 24V
Electronic transmission control
Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
Starter, electric
Auxiliary start receptacle
OTHER
Automatic bucket lift kickout/positioner
Axle temperature sensor
Battery disconnect and jump start receptacle, bumper
Coupling, Caterpillar O-ring face seals
Economy mode with on demand throttle
Emergency platform exit
Engine, crankcase, 500 hour interval with CH4
Engine idle management features:
– Auto idle kickdown
– Delayed engine shutdown
– Engine idle shutdown
Fenders, steel (front)
Guards, crankcase and powertrain
Ground level lockable battery disconnect switch
Grouped/labeled lube points
Hitch, drawbar with pin
Hoses, Cat XT™
Oil sampling valves
Positive flow control hydraulic system
Product Link™
Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
Stairway, left and right rear access
Steering, load sensing
Toe kicks
Vandalism protection caplocks
Venturi stack
Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
OTHER OPTIONAL CONFIGURATIONS
Millyard
Steel Mill
OTHER OPTIONAL CONFIGURATIONS
Millyard
Steel Mill
OTHER OPTIONAL CONFIGURATIONS
Millyard
Steel Mill
OTHER OPTIONAL CONFIGURATIONS
Millyard
Steel Mill
OTHER OPTIONAL CONFIGURATIONS
Millyard
Steel Mill